Is the CAMLOCK AU connector plug with female thread, aluminum compatible with standard MIL-C-27487 (A-A-59326) couplings for petrochemical transfer at up to 10 bar?

Yes. The CAMLOCK AU connector plug with female thread, aluminum is made according to the American military standard MIL-C-27487 (A-A-59326) and is commonly used as a transfer connection in the petrochemical industry, with a rated working pressure up to 10 bar (size-dependent). Because it is manufactured to that MIL specification, it is compatible with standard MIL-C-27487 (A-A-59326) couplings for petrochemical transfer up to the specified pressure.provided mating coupling is the corresponding MIL-spec part, seals (flat polyurethane gasket) are in good condition, and both parts are of matching size and material compatibility for the media handled.

Can the CAMLOCK AU connector plug with female thread, aluminum be used with flat polyurethane gaskets for safe petrochemical transfer up to 10 bar?

Yes. The CAMLOCK AU connector plug with female thread, aluminum (with internal BSP thread) is designed per MIL-C-27487 (A-A-59326) and is commonly used for petrochemical transfer. It is supplied with a flat polyurethane gasket option and is rated for working pressures up to 10 bar (dependent on connector size). When sized and installed correctly, with compatible mating parts and maintained gaskets, it is suitable for safe petrochemical transfer up to 10 bar. Ensure regular inspection, correct torque, and compatibility with conveyed media and temperatures for continued safe operation.

Does the CAMLOCK AU connector plug with female thread, aluminum meet BSP thread sealing requirements for petrochemical use?

Yes. with conditions. CAMLOCK AU connector plug with female thread, aluminum (flat polyurethane gasket) made to MILâCâ27487 (AâAâ59326) is widely used for petrochemical transfer applications and can meet BSP thread sealing requirements when installed and maintained correctly. Key points: - Thread compatibility: The connector uses internal BSP threads; when mated with the corresponding external BSP male thread of the correct form (parallel BSPP or tapered BSPT as applicable) it provides proper thread engagement consistent with BSP standards. - Sealing method: Sealing is primarily achieved by the flat polyurethane gasket (face seal) specified in the description, not by metal thread sealing. For faceâseal camlock systems this is an accepted sealing method in many petrochemical transfer uses, provided the gasket material (polyurethane) is compatible with the conveyed product and operating temperature range. - Pressure rating: Working pressure up to 10 bar (sizeâdependent) must meet your system requirements. Confirm the specific connector size and its certified pressure rating for your application. - Material and environment: Aluminum is common for camlock fittings but may have limitations with certain aggressive chemicals, elevated temperatures, or abrasive services. Verify chemical compatibility and corrosion resistance for your petrochemical fluid and environment. - Standards and certification: MILâCâ27487 (AâAâ59326) indicates manufacture to a recognized spec. For petrochemical use you should confirm any additional industry-specific certifications (e.g., ATEX, API, local regulatory approvals) required by your facility or jurisdiction. Recommendation: Verify thread type (BSPP vs BSPT), confirm gasket compatibility with the fluid and temperature, ensure the connector size meets the 10 bar rating for your system, and obtain any required petrochemical certifications. If conditions include highly corrosive fluids, high temperatures, or safetyâcritical service, consider stainless steel camlocks or add secondary sealing measures.

CAMLOCK AU connector plug with female thread, aluminum

Additional information

Material	AL – aluminum

CAMLOCK AU connector plug with internal BSP thread (flat polyurethane gasket) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-AU-050-A	CAMLOCK AU 1/2" aluminum connector	-	9	In stock	Enquiry
AC-AU-050-AX	CAMLOCK AU 1/2" connector, aluminum	-	9	In stock	Enquiry
AC-AU-075-A	CAMLOCK AU 3/4" aluminum connector	-	10	In stock	Enquiry
AC-AU-075-AX	CAMLOCK AU 3/4" connector, aluminum	-	10	In stock	Enquiry
AC-AU-100-A	CAMLOCK AU 1" aluminum connector	-	10	In stock	Enquiry
AC-AU-100-AX	CAMLOCK AU 1" connector, aluminum	-	10	In stock	Enquiry
AC-AU-125-A	CAMLOCK AU 1.1/4" aluminum connector	-	10	In stock	Enquiry
AC-AU-125-AX	CAMLOCK AU 1.1/4" connector, aluminum	-	10	In stock	Enquiry
AC-AU-150-A	CAMLOCK AU 1.1/2" aluminum connector	-	10	In stock	Enquiry
AC-AU-150-AX	CAMLOCK AU 1.1/2" connector, aluminum	-	10	In stock	Enquiry
AC-AU-200-A	CAMLOCK AU 2" aluminum connector	-	10	In stock	Enquiry
AC-AU-200-AX	CAMLOCK AU 2" connector, aluminum	-	10	In stock	Enquiry
AC-AU-250-A	CAMLOCK AU 2.1/2" aluminum connector	-	10	In stock	Enquiry
AC-AU-250-AX	CAMLOCK AU 2.1/2" connector, aluminum	-	10	In stock	Enquiry
AC-AU-300-A	CAMLOCK AU 3" aluminum connector	-	10	In stock	Enquiry
AC-AU-300-AX	CAMLOCK AU 3" connector, aluminum	-	10	In stock	Enquiry
AC-AU-400-A	CAMLOCK AU 4" aluminum connector	-	10	In stock	Enquiry
AC-AU-400-AX	CAMLOCK AU 4" connector, aluminum	-	10	In stock	Enquiry
AC-AU-500-A	CAMLOCK AU 5" aluminum connector	-	5	In stock	Enquiry
AC-AU-500-AX	CAMLOCK AU 5" connector, aluminum	-	5	In stock	Enquiry
AC-AU-600-A	CAMLOCK AU 6" aluminum connector	-	5	In stock	Enquiry
AC-AU-600-AX	CAMLOCK AU 6" connector, aluminum	-	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

CAMLOCK AU connector plug with internal BSP thread (flat polyurethane gasket) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum.