CEJN 525 hydraulic quick coupling, plug with GW BSP with valve and eliminator, galvanized steel

Q: Is the CEJN 525 hydraulic quick coupling, plug with GW BSP with valve and eliminator, galvanized steel suitable for use with hydraulic oil at 450 bar and -30Â°C?

Yes. The CEJN 525 hydraulic quick coupling, plug with GW BSP with valve and eliminator, galvanized steel is suitable for use with hydraulic oil at 450 bar and -30Â°C based on the provided specifications: it is designed for hydraulic power (hydraulic oil), rated for working pressures up to 450 bar (depending on diameter), has an operating temperature range from -30Â°C to +100Â°C, uses NBR seals compatible with many hydraulic oils, and is zincânickel coated steel for heavyâduty conditions. Caveats: verify the specific coupling diameter rating (pressure depends on diameter), confirm NBR compatibility with your specific hydraulic oil and any additives at low temperature, and ensure the entire system (hoses, fittings) is rated for 450 bar and â30Â°C. If any doubt, consult CEJN technical support or product datasheet for your exact part number and fluid compatibility.

Q: Can the CEJN 525 hydraulic quick coupling, plug with GW BSP with valve and eliminator, galvanized steel handle steam and chemicals at 450 bar?

Yes - the CEJN 525 hydraulic quick coupling, plug with GW BSP with valve and eliminator, galvanized steel is rated for hydraulic and industrial media including steam and chemicals, with working pressure up to 450 bar (depending on diameter). It is designed for heavy-duty use, zincânickel coated steel construction, NBR seals, operating temperature -30Â°C to +100Â°C, safety factor 4:1. Note: compatibility with specific chemicals/steam conditions should be verified against NBR seal compatibility and actual operating temperature/pressure for your diameter and application.

Q: Can the CEJN 525 hydraulic quick coupling, plug with GW BSP with valve and eliminator, galvanized steel be used with fuels and oils at 450 bar?

Yes. the CEJN 525 hydraulic quick coupling, plug with GW BSP with valve and eliminator, galvanized steel can be used with fuels and oils at pressures up to 450 bar, with important conditions and limitations: - Application list explicitly includes âfuels and oils,â and the coupling is rated for hydraulic power (hydraulic oil) and similar media. - Working pressure is specified âup to 450 bar (depending on diameter).â You must confirm the specific diameter/version you plan to use supports 450 bar. - Sealing material is NBR (nitrile) with an operating temperature range â30Â°C to +100Â°C. Ensure your fuel/oil type and operating temperature are compatible with NBR (some fuels, aggressive oils or additives and temperatures outside this range can degrade NBR). - Material is zincânickel coated steel (galvanized steel). suitable for many fuels/oils, but check for compatibility with any specific chemical additives or extremely corrosive fluids. - Safety factor 4:1 is provided, and flow ratings are given for a 3 bar pressure drop. verify flow requirements in your system match the couplingâs flow capability. Recommendation: verify the exact coupling diameter/version supports 450 bar, confirm NBR compatibility with your specific fuel/oil and temperature conditions, and if in doubt consult CEJN technical support or provide fluid specifications for confirmation.

All products, Hydraulic quick couplings/

Additional information

Material	CS – steel (cast iron)

CEJN series 525 quick coupling plug (NORDIC RANGE) with shut-off valve and eliminator, featuring internal BSP thread. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: zinc-nickel coated steel. Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: NBR. Operating temperature: from -30°C to +100°C. Flow rate is specified for a pressure drop of 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CJ-H-105256234	CEJN 525 plug, 3/8" BSP thread, NBR seal, with valve and elimination.	-	350	In stock	Enquiry
CJ-H-105256235	CEJN 525 plug, 1/2" BSP thread, NBR seal, with valve and elimination.	-	300	In stock	Enquiry
CJ-H-105256237	CEJN 525 plug, 3/4" BSP thread, NBR seal, with valve and elimination.	-	280	In stock	Enquiry
CJ-H-105256239	CEJN 525 plug, 1" BSP thread, NBR seal, with valve and elimination.	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

CEJN series 525 quick coupling plug (NORDIC RANGE) with shut-off valve and eliminator, featuring internal BSP thread. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: zinc-nickel coated steel. Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: NBR. Operating temperature: from -30°C to +100°C. Flow rate is specified for a pressure drop of 3 bar.