Is Coil 30 mm Ã8 for CNOMO valves 060580 compatible with 24V Â±10% supply and rated for continuous 100% ED operation?

Yes. Coil 30 mm Ã8 for CNOMO valves 060580 is compatible with a 24V Â±10% supply and is rated for continuous 100% ED operation. The product specifies a voltage tolerance of -10% to +10%, which covers the 24V Â±10% range, and it explicitly states a continuous duty cycle of 100% ED. Additional relevant details: insulation class F155 and protection degree IP65 (EN60529) with DIN 43650 shape A connector.

Does Coil 30 mm Ã8 for CNOMO valves 060580 with F155 insulation and DIN 43650 A connector meet IP65 protection with connector?

Yes. Coil 30 mm Ã8 for CNOMO valves 060580 with F155 insulation and DIN 43650 A connector meets IP65 protection with the connector (Protection degree: IP65 EN60529 with connector).

Can Coil 30 mm Ã8 for CNOMO valves 060580 operate safely across different ambient temperatures given insulation class F155?

Yes. Coil 30 mm Ã8 for CNOMO valves 060580 with insulation class F155 can operate safely across a wide range of ambient temperatures typical for F-class (155 Â°C) insulation systems, provided installation and operating limits are respected. Key points: - Insulation class F155 indicates materials can withstand temperatures up to 155 Â°C, so the coilâs internal insulation is rated for high thermal stress and provides robust thermal margin versus normal coil operating temperatures. - Continuous duty cycle 100% ED means the coil is designed for continuous energization; it will tolerate sustained use without overheating if ambient and cooling conditions remain within design limits. - IP65 protection (with connector) ensures the coil is protected against dust ingress and low-pressure water jets, which helps maintain safe operation in damp or dusty environments, reducing risk of moisture-related heating or insulation degradation. - Voltage tolerance -10% to +10% requires supply voltage to remain within that band. Significant overvoltage or undervoltage can change coil power dissipation and temperature rise; staying within tolerance supports safe temperature behavior across ambients. - Connector DIN 43650 shape A supports reliable electrical connection and sealing; proper mating and sealing are necessary to maintain IP65 and thermal performance. Practical considerations to ensure safe operation across ambient temperatures: - Verify the specified maximum ambient temperature in the full product datasheet or manufacturer guidance; while F155 insulation supports high internal temperatures, the coilâs specified ambient limit may be lower. - Ensure adequate heat dissipation and ventilation; avoid mounting in confined spaces where heat can accumulate. - Maintain supply voltage within -10% to +10% and avoid rapid cycling beyond continuous-duty design. - Ensure connector and mating parts are properly sealed to maintain IP65 and prevent moisture ingress. - If operation will be near the upper ambient limits or in extreme environments, consult the manufacturer for application-specific guidance or derating recommendations. Conclusion: Coil 30 mm Ã8 for CNOMO valves 060580 with insulation class F155 is suitable for safe operation across a broad range of ambient temperatures, assuming voltage tolerance, continuous-duty use, sealing, and manufacturer ambient limits are observed.

Coil 30 mm Ø8 for CNOMO valves 060580

All products, Equipment for pneumatic valves/

Additional information

Coil 30 mm O8 for solenoid valves CNOMO 060580. Insulation class: F155. Voltage tolerance: -10% to +10%. Protection degree: IP65 EN60529 with connector. Connector shape: DIN 43650 shape A. Continuous duty cycle: 100% ED.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-W0210010100	Coil 30 mm D8 4W 24V DC (CNOMO valves)	-	-	In stock	Enquiry
MW-W0210011100	Coil 30 mm D8 4VA 24V AC 50/60 Hz (CNOMO valves)	-	-	In stock	Enquiry
MW-W0210012100	Coil 30 mm D8 4VA 110V AC 50/60 Hz (CNOMO valves)	-	-	In stock	Enquiry
MW-W0210013100	Coil 30 mm D8 4VA 220V AC 50/60 Hz (CNOMO valves)	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Coil 30 mm O8 for solenoid valves CNOMO 060580. Insulation class: F155. Voltage tolerance: -10% to +10%. Protection degree: IP65 EN60529 with connector. Connector shape: DIN 43650 shape A. Continuous duty cycle: 100% ED.