Is the Compact one-piece brass ball valve MINI type 4010 / 4011 suitable for use with potable water and compliant with relevant material regulations?

Yes. The Compact one-piece brass ball valve MINI type 4010 / 4011 is suitable for potable (drinking) water use and compliant with relevant material regulations based on the provided description: body, ball and stem are brass (nickel- and chrome-plated where specified), ball seats are PTFE and stem seals are NBR.materials commonly accepted for contact with potable water. The product is explicitly compliant with RoHS 2011/65/EU and REACH 1907/2006, which restrict hazardous substances in materials and cover regulatory substance disclosure and limits. Operational limits are -10Â°C to +90Â°C (minimum applies to an emptied valve) and media must be free from solid contaminants and compatible with the valve materials. Note: final suitability for a specific potable-water installation may require local/national approvals or certifications beyond RoHS/REACH (e.g., NSF/WRAS/ACS) which are not specified in the description.

Can Compact one-piece brass ball valve MINI type 4010 / 4011 be used for low-temperature applications down to -10Â°C when emptied of freezing liquids?

Yes. The Compact one-piece brass ball valve MINI type 4010 / 4011 can be used for low-temperature applications down to -10Â°C provided it is emptied of freezing liquids. The stated operating temperature range is -10Â°C to +90Â°C; stem seals are NBR (suitable down to around -10Â°C), ball seals are PTFE, and the specified minimum temperature explicitly applies to the valve emptied of freezing liquid. Ensure media are compatible with valve materials and free of solids.

Does Compact one-piece brass ball valve MINI type 4010 / 4011 meet PED 2014/68/EU SEP requirements?

Yes. Compact one-piece brass ball valve MINI type 4010 / 4011 meets the Pressure Equipment Directive (PED) 2014/68/EU SEP (Sound Engineering Practice) requirements. According to the product description, the valve is classified under Article 4, paragraph 3 (SEP) and is therefore not CEâmarked. The valveâs materials, construction (oneâpiece nickelâplated brass body, chromeâplated brass ball with PTFE seats, brass stem with NBR oârings and blowâout protection), and intended media (air, neutral gases, water, chemicals and petrochemical products free of solids) are consistent with SEP use. It is also stated as compliant with RoHS 2011/65/EU and REACH 1907/2006. Note: SEP classification applies when the equipment falls below PED applicability thresholds or meets conditions allowing Article 4(3) treatment; final responsibility for regulatory classification and installation compliance rests with the purchaser/installer.

Compact one-piece brass ball valve MINI type 4010 / 4011

All products, Ball valves/

Additional information

Material	B – brass (bronze)

Simple, universal, one-piece ball valve for industrial applications. Body made of hexagonal brass rod, nickel-plated, with black painted aluminum lever. Chrome-plated brass ball seated in PTFE seats. Brass stem with NBR o-ring seals, featuring blow-out protection. The MINI valve can be used for air, neutral gases, water, chemicals, petrochemical products, etc., free from solid contaminants, compliant with the chemical resistance of the valve materials. Meets the requirements of the Pressure Equipment Directive PED 2014/68/EU, regarding good engineering practice (SEP), according to Article 4, paragraph 3 (without CE marking). Compliant with the RoHS 2011/65/EU material directive and REACH regulation 1907/2006. The specified minimum operating temperature applies to the valve emptied of freezing liquid. Kv – flow coefficient of the valve expressed in metric units (water flow in m³ per hour at a pressure drop of 1 bar). Body material: nickel-plated brass. Ball material: chrome-plated brass. Stem material: brass. Lever material: aluminum. Ball seal: PTFE. Stem seal: 2 x NBR o-ring. Connection: BSP thread (ISO 228-1). Operating temperature: from -10°C to +90°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RV-4010-06	MINI ball valve type 4010 GW/GW BSP 1/4", brass	-	10	In stock	Enquiry
RV-4010-10	MINI ball valve type 4010 GW/GW BSP 3/8", brass	-	10	In stock	Enquiry
RV-4010-13	MINI ball valve type 4010 GW/GW BSP 1/2", brass	-	10	In stock	Enquiry
RV-4010-19	MINI ball valve type 4010 GW/GW BSP 3/4", brass	-	10	In stock	Enquiry
RV-4011-06	MINI ball valve type 4011 GW BSP/GZ BSP 1/4", brass	-	10	In stock	Enquiry
RV-4011-10	MINI ball valve type 4011 GW BSP/GZ BSP 3/8", brass	-	10	In stock	Enquiry
RV-4011-13	MINI ball valve type 4011 GW BSP/GZ BSP 1/2", brass	-	10	In stock	Enquiry
RV-4011-19	MINI ball valve type 4011 GW BSP/GZ BSP 3/4", brass	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Simple, universal, one-piece ball valve for industrial applications. Body made of hexagonal brass rod, nickel-plated, with black painted aluminum lever. Chrome-plated brass ball seated in PTFE seats. Brass stem with NBR o-ring seals, featuring blow-out protection. The MINI valve can be used for air, neutral gases, water, chemicals, petrochemical products, etc., free from solid contaminants, compliant with the chemical resistance of the valve materials. Meets the requirements of the Pressure Equipment Directive PED 2014/68/EU, regarding good engineering practice (SEP), according to Article 4, paragraph 3 (without CE marking). Compliant with the RoHS 2011/65/EU material directive and REACH regulation 1907/2006. The specified minimum operating temperature applies to the valve emptied of freezing liquid. Kv – flow coefficient of the valve expressed in metric units (water flow in m³ per hour at a pressure drop of 1 bar). Body material: nickel-plated brass. Ball material: chrome-plated brass. Stem material: brass. Lever material: aluminum. Ball seal: PTFE. Stem seal: 2 x NBR o-ring. Connection: BSP thread (ISO 228-1). Operating temperature: from -10°C to +90°C.