Can the LUB compressed air lubricator, SYNTESIÂ® series, without end connections, operate safely at supply pressures up to 15 bar (SY1) and 13 bar (SY2)?

Yes. The LUB compressed air lubricator, SYNTESIÂ® series, without end connections, is specified to operate safely at supply pressures up to 15 bar for the SY1 size and up to 13 bar for the SY2 size. Operating temperature range is â10Â°C to +50Â°C; other technical limits (tank capacity, connections and flow rates) should also be observed as per the product data.

What is the oil tank capacity for the LUB compressed air lubricator, SYNTESIÂ® series, without end connections (SY1 and SY2)?

LUB compressed air lubricator, SYNTESIÂ® series, without end connections (SY1 and SY2) has the following oil tank capacities: SY1 - 60 cmÂ³; SY2 - 130 cmÂ³.

How do I refill the oil in the LUB compressed air lubricator, SYNTESIÂ® series, without end connections?

To refill the oil in the LUB compressed air lubricator, SYNTESIÂ® series, without end connections, follow these steps: 1. Depressurize the pneumatic line and isolate the lubricator to ensure safety. 2. Locate the oil refill plug on the lubricator (standard version, STD). 3. Unscrew and remove the oil refill plug. 4. Pour the appropriate lubricating oil into the tank up to the recommended level: SY1 capacity 60 cmÂ³, SY2 capacity 130 cmÂ³. 5. Reinstall and securely tighten the oil refill plug. 6. Repressurize the system and check for leaks and correct oil mist delivery. Notes: Observe operating temperature range (â10Â°C to +50Â°C) and maximum supply pressures (up to 15 bar for SY1, up to 13 bar for SY2). Choose oil compatible with your system and do not overfill.

LUB compressed air lubricator, SYNTESI® series, without end connections

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50

Lubricator series SYNTESI®, without end connections, ensures proper lubrication of devices in pneumatic installations with oil mist. Standard version (STD), oil filling through the oil refill plug. Size: SY1, SY2. Tank capacity: 60 cm³ – SY1, 130 cm³ – SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8″ to 3/8″ for SY1 and BSP 3/8″ to 1″ for SY2. Flow rate: 1600 l/min – 1/8″, 3000 l/min – 1/4″, 3650 l/min – 3/8″, 6100 l/min – 1/2″, 3/4″, 1″ (at inlet pressure 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-5610L100	Lubricator LUB SY1 without end plates.	-	-	In stock	0 zł		Enquiry
MW-5620L100	Lubricator LUB SY2 without end plates.	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lubricator series SYNTESI®, without end connections, ensures proper lubrication of devices in pneumatic installations with oil mist. Standard version (STD), oil filling through the oil refill plug. Size: SY1, SY2. Tank capacity: 60 cm³ – SY1, 130 cm³ – SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8″ to 3/8″ for SY1 and BSP 3/8″ to 1″ for SY2. Flow rate: 1600 l/min – 1/8″, 3000 l/min – 1/4″, 3650 l/min – 3/8″, 6100 l/min – 1/2″, 3/4″, 1″ (at inlet pressure 6 bar Δp = 1 bar).