The FR + L set of the SKILLAIR® series with a high degree of reliability consists of an air filter, a pressure reducing valve, and a lubricator. The purpose of the set is to purify the air supplied by the compressor, reduce and maintain the set pressure stably during fluctuations in supply pressure, and lubricate with an oil mist. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: 5 µm, 20 µm, 50 µm. Output pressure range: 0÷8, 0÷12 bar. Connection: GW BSP 1/4″ ÷ 1″. Condensate discharge: manual/semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Nominal flow: from 800 to 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
The FR + L set of the SKILLAIR® series with a high degree of reliability consists of an air filter, a pressure reducing valve, and a lubricator. The purpose of the set is to purify the air supplied by the compressor, reduce and maintain the set pressure stably during fluctuations in supply pressure, and lubricate with an oil mist. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: 5 µm, 20 µm, 50 µm. Output pressure range: 0÷8, 0÷12 bar. Connection: GW BSP 1/4″ ÷ 1″. Condensate discharge: manual/semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Nominal flow: from 800 to 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
Additional information
Maximum operating temperature [°C]
50
Standard length [m]
1.52, 15, 2, 25, 4
Do you need a larger quantity of products or a bespoke quote?
