Can the Extender for coolant, 1/2" system, JETON withstand continuous operation up to +65Â°C without deformation?

Yes. According to the product description, the Extender for coolant, 1/2" system, JETON Format is made of acetal and has an operating temperature rated up to +65Â°C. Acetal (POM) is dimensionally stable and resistant to creep within its specified temperature range, so continuous operation at or below +65Â°C should not cause deformation if used under normal coolant system conditions and within the stated rating. Ensure system pressures and chemical compatibility are also within manufacturer limits for long-term reliability.

Is the Extender for coolant, 1/2" system, JETON compatible with standard acetal fittings at temperatures up to +65Â°C?

Yes. Extender for coolant, 1/2" system, JETON Format is made of acetal and rated for operating temperatures up to +65Â°C, so it is compatible with standard acetal fittings at those temperatures.

Does the Extender for coolant, 1/2" system, JETON require periodic inspection when used at temperatures near +65Â°C?

Yes. When the Extender for coolant, 1/2" system, JETON Format is used at temperatures near its maximum operating temperature of +65Â°C, periodic inspection is recommended. Although made of acetal, which performs well up to +65Â°C, prolonged exposure at or near the upper limit can accelerate material aging, dimensional creep, loss of mechanical strength, or stress crackingâespecially in coolant environments or under mechanical load. Inspect for signs of deformation, cracks, discoloration, leaks at joints (noting there is no clamp), and secure fit to adjacent segments. Establish inspection intervals based on operating hours, thermal cycling frequency, chemical compatibility of the coolant, and criticality of the application; for many installations a routine visual check during regular maintenance and more thorough inspections at defined service intervals is prudent. Replace the extender immediately if any deterioration or leakage is observed.

Extender for coolant, 1/2″ system, JETON

Air and water hoses, All products/

Additional information

Extension element for use in coolant supply systems to reduce the number of segments – 1/2″ system. Without clamp. Material: acetal. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-84441	Extension L = 96.30 mm (system 1/2")	-	2	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Extension element for use in coolant supply systems to reduce the number of segments – 1/2″ system. Without clamp. Material: acetal. Operating temperature: up to +65°C.