What is the maximum working pressure of the End DIN 11851 with GZ, with tail for RS clamp, stainless steel, type DZR?

The maximum allowable working pressure of the End DIN 11851 with GZ, with tail for RS clamp, stainless steel, type DZR Format is: 40 bar for sizes DN10âDN40 and 25 bar for sizes DN50âDN100. Operating temperature depends on the gasket material.

Can the End DIN 11851 with GZ, with tail for RS clamp, stainless steel, type DZR be used with other gasket materials to extend its operating temperature range?

End DIN 11851 with GZ, with tail for RS clamp, stainless steel, type DZR: yes - the operating temperature range depends on the gasket material. The fitting itself (AISI 316) supports specified pressures (40 bar DN10âDN40; 25 bar DN50âDN100) and the Ra 0.8 Âµm bore finish improves sealing. To extend temperature limits, choose gasket materials rated for higher or lower temperatures (e.g., PTFE for high temperatures, Viton/FKM for elevated temps, EPDM or silicone for low/high extremes) ensuring chemical compatibility and compliance with food/industry standards. Verify gasket dimensions for the Rd thread/tail interface and confirm pressure/temperature ratings of the chosen gasket with the gasket manufacturer before use.

Is the End DIN 11851 with GZ, with tail for RS clamp, stainless steel, type DZR suitable for cosmetic industry use?

Yes. the End DIN 11851 with GZ, with tail for RS clamp, stainless steel, type DZR is suitable for cosmetic industry use. Reasons: - The fitting is a variant of the DIN 11851 âmilk connectionâ widely used in food, cosmetic and chemical industries, so it is designed for hygienic screw connections. - Material AISI 316 stainless steel (type DZR) offers excellent corrosion resistance and is commonly accepted for cosmetic applications. - Surface finish: premium version hole roughness Ra 0.8 Âµm supports hygienic cleaning and reduces contamination risk (economical version has higher Ra). - Pressure and temperature ratings are adequate for typical cosmetic processing: max working pressure per DIN 11851 is 40 bar (DN10âDN40) and 25 bar (DN50âDN100); operating temperature depends on gasket material selection. - The round Rd thread with large tolerances ensures easy, reliable sealing when used with appropriate gaskets and RS clamp components. Notes for implementation: - Choose gasket material compatible with your cosmetic formulations and required temperature range. - Prefer the premium surface finish (Ra 0.8 Âµm) for stricter hygiene requirements. - Verify gasket and clamp assembly meet your facilityâs cleaning and validation procedures.

Fitting DIN 11851 with male thread, with a tail for an RS clamp, steel stainless, type DZR

All products, Hygienic stainless steel couplings/

Additional information

Material	SS – stainless steel

Fitting DIN 11851 with a thread external Rd, with a tail for an RS clamp, is to element tak called “coupling milk”, most often used in industry food coupling screw. also in industry cosmetic and chemical, many devices and instruments equipped is in to coupling. round thread Rd and large tolerances ensure, that connection easily closes. Roughness Ra hole in version premium is 0.8 µm (in version economical value roughness is higher than in version standard). Maximum permissible working pressure (for the coupling itself acc. to DIN 11851): 40 bar (DN10÷DN40), 25 bar (DN50÷DN100). Operating temperature: depending on type material used the gasket. Material: steel stainless AISI 316.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NH-DZR-015	Fitting DIN 11851 for an RS clamp DN15, Rd 34x1/8", hose 13 mm	12	40	In stock	Enquiry
NH-DZR-015-X	Fitting DIN 11851 DN15 male Rd 34x1/8" for an RS clamp, hose 13 mm	12	40	In stock	Enquiry
NH-DZR-020	Fitting DIN 11851 for an RS clamp DN20, Rd 44x1/6", hose 19 mm	20	40	In stock	Enquiry
NH-DZR-020-X	Fitting DIN 11851 DN20 male Rd 44x1/6" for an RS clamp, hose 19 mm	20	40	In stock	Enquiry
NH-DZR-025	Fitting DIN 11851 for an RS clamp DN25, Rd 52x1/6", hose 25 mm	25	40	In stock	Enquiry
NH-DZR-025-X	Fitting DIN 11851 DN25 male Rd 52x1/6" for an RS clamp, hose 25 mm	25	40	In stock	Enquiry
NH-DZR-032	Fitting DIN 11851 for an RS clamp DN32, Rd 58x1/6", hose 32 mm	32	40	In stock	Enquiry
NH-DZR-032-X	Fitting DIN 11851 DN32 male Rd 58x1/6" for an RS clamp, hose 32 mm	32	40	In stock	Enquiry
NH-DZR-038	Fitting DIN 11851 for an RS clamp DN38, Rd 65x1/6", hose 38 mm	38	40	In stock	Enquiry
NH-DZR-038-X	Fitting DIN 11851 DN40 male Rd 65x1/6" for an RS clamp, hose 38 mm	38	40	In stock	Enquiry
NH-DZR-040	Fitting DIN 11851 for an RS clamp DN40, Rd 65x1/6", hose 40 mm	40	40	In stock	Enquiry
NH-DZR-050	Fitting DIN 11851 for an RS clamp DN50, Rd 78x1/6", hose 50 mm	50	25	In stock	Enquiry
NH-DZR-050-X	Fitting DIN 11851 DN50 male Rd 78x1/6" for an RS clamp, hose 50-51 mm	50	25	In stock	Enquiry
NH-DZR-051	Fitting DIN 11851 for an RS clamp DN50, Rd 78x1/6", hose 51 mm	50	25	In stock	Enquiry
NH-DZR-063	Fitting DIN 11851 for an RS clamp DN63, Rd 95x1/6", hose 63 mm	65	25	In stock	Enquiry
NH-DZR-065	Fitting DIN 11851 for an RS clamp DN65, Rd 95x1/6", hose 65 mm	65	25	In stock	Enquiry
NH-DZR-065-X	Fitting DIN 11851 DN65 male Rd 95x1/6" for an RS clamp, hose 65 mm	65	25	In stock	Enquiry
NH-DZR-075	Fitting DIN 11851 for an RS clamp DN75, Rd 110x1/4", hose 75 mm	75	25	In stock	Enquiry
NH-DZR-075-X	Fitting DIN 11851 DN80 male Rd 110x1/4" for an RS clamp, hose 75-76 mm	75	25	In stock	Enquiry
NH-DZR-076	Fitting DIN 11851 for an RS clamp DN75, Rd 110x1/4", hose 76 mm	75	25	In stock	Enquiry
NH-DZR-080	Fitting DIN 11851 for an RS clamp DN80, Rd 110x1/4", hose 80 mm	80	25	In stock	Enquiry
NH-DZR-100	Fitting DIN 11851 for an RS clamp DN100, Rd 130x1/4", hose 100 mm	100	25	In stock	Enquiry
NH-DZR-100-X	Fitting DIN 11851 DN100 male Rd 130x1/4" for an RS clamp, hose 100-102 mm	100	25	In stock	Enquiry
NH-DZR-102	Fitting DIN 11851 for an RS clamp DN100, Rd 130x1/4", hose 102 mm	100	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Fitting DIN 11851 with a thread external Rd, with a tail for an RS clamp, is to element tak called “coupling milk”, most often used in industry food coupling screw. also in industry cosmetic and chemical, many devices and instruments equipped is in to coupling. round thread Rd and large tolerances ensure, that connection easily closes. Roughness Ra hole in version premium is 0.8 µm (in version economical value roughness is higher than in version standard). Maximum permissible working pressure (for the coupling itself acc. to DIN 11851): 40 bar (DN10÷DN40), 25 bar (DN50÷DN100). Operating temperature: depending on type material used the gasket. Material: steel stainless AISI 316.