Can the Pipe connection DIN 2353 with nozzle for measuring hose, straight be used with other hose diameters besides DN2 and DN4?

Pipe connection DIN 2353 with nozzle for measuring hose, straight Format: Based on the description, the nozzle end is specifically intended for measuring hoses DN2 or DN4 and is supplied complete with a matching clamping sleeve. Therefore it is not designed for other hose diameters without changing the end fitting and sleeve to match the alternative diameter. Additionally, safe use depends on the working pressure rating of both the mounted tube connection (L or S series) and the hose chosen. To use other hose sizes you must replace the nozzle/end piece and appropriate clamping sleeve rated for that hose and verify pressure compatibility; otherwise do not use different diameters.

Does the Pipe connection DIN 2353 with nozzle for measuring hose, straight require a specific clamping sleeve type for DN2 vs DN4?

Yes. The Pipe connection DIN 2353 with nozzle for measuring hose, straight is supplied complete with a clamping sleeve sized for the hose end specified (DN2 or DN4). That means a specific clamping sleeve type appropriate to DN2 or DN4 is required and is included with the connectionâuse the sleeve that matches the hose nominal diameter (DN2 for DN2 hoses, DN4 for DN4 hoses) to ensure correct assembly, sealing and working pressure performance.

Pipe connection DIN 2353 with nozzle for measuring hose, straight

Q: What is the maximum working pressure of the Pipe connection DIN 2353 with nozzle for measuring hose, straight when used with DN2 or DN4 measuring hoses?

The maximum working pressure of the Pipe connection DIN 2353 with nozzle for measuring hose, straight depends on two factors stated in the description: the working pressure rating of the DIN 2353 tube connection actually mounted (L . light series or S . heavy series) and the rated working pressure of the attached measuring hose (DN2 or DN4). The fitting itself is steel with zincânickel coating and is supplied with the clamping sleeve, but no single universal pressure limit is given independent of the chosen series and hose. Practical guidance: - If you mount the connection in the S (heavy) series and use a measuring hose whose rated working pressure equals or exceeds the Sâseries connection rating, the assembly can be operated up to that Sâseries rated pressure. - If you mount the L (light) series or use a hose with a lower rated pressure, the maximum working pressure is limited to the lower of the two ratings (connection series rating vs. hose rating). To determine the exact numeric maximum working pressure for a specific assembly, consult the manufacturerâs pressure ratings for: 1) the chosen DIN 2353 series (L or S) tube connection, and 2) the selected DN2 or DN4 measuring hose. The lower of those two rated pressures is the maximum working pressure for the Pipe connection DIN 2353 with nozzle for measuring hose, straight assembly.

Additional information

Material	CS – steel (cast iron)

Straight tube connection for assembly using a ring and DIN 2353 nut, with an end designed for a measuring hose. The connection is available as: L (light series) and S (heavy series), while the end is intended for hoses DN2 or DN4 and supplied complete with a clamping sleeve. Working pressure depends on the connection mounted on the tube and the working pressure of the hose. Material: steel with a zinc-nickel coating.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PS-801-30-004-00	End cap 4 mm, hose 2x5 mm, with sleeve	2	-	In stock	Enquiry
PS-801-30-006-00	End cap 6 mm, hose 2x5 mm, with sleeve	2	-	In stock	Enquiry
PS-801-30-008-00	End cap 8 mm, hose 2x5 mm, with sleeve	2	-	In stock	Enquiry
PS-804-30-004-00	End cap 4 mm, hose 4x8 mm, with sleeve	4	-	In stock	Enquiry
PS-804-30-006-00	End cap 6 mm, hose 4x8 mm, with sleeve	4	-	In stock	Enquiry
PS-804-30-008-00	End cap 8 mm, hose 4x8 mm, with sleeve	4	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Straight tube connection for assembly using a ring and DIN 2353 nut, with an end designed for a measuring hose. The connection is available as: L (light series) and S (heavy series), while the end is intended for hoses DN2 or DN4 and supplied complete with a clamping sleeve. Working pressure depends on the connection mounted on the tube and the working pressure of the hose. Material: steel with a zinc-nickel coating.