Is the Insert DIN 3015 heavy duty, polyamide, type 201 suitable for continuous use at +180Â°C?

Yes. Insert DIN 3015 heavy duty, polyamide, type 201 is specified for an operating temperature range up to +180Â°C, so it is suitable for continuous use at +180Â°C within that declared limit. Ensure your application doesnât impose additional stresses (chemical exposure, UV, mechanical load, creep, or higher temperatures) that could degrade polyamide; if such factors are present or if safety margins are required, confirm with manufacturer data or perform testing.

Does the Insert DIN 3015 heavy duty, polyamide, type 201 resist short-term exposure to chemicals and fuels?

Yes. Insert DIN 3015 heavy duty, polyamide, type 201 resists short-term exposure to many chemicals and fuels. The insert is made of selfâextinguishing polyamide and rated for operation from â40Â°C to +180Â°C, which indicates good thermal and chemical resilience for typical automotive and industrial transient exposures. However, longâterm resistance depends on specific fluids, concentrations and temperatures; aggressive solvents, strong acids/bases or prolonged immersion can cause degradation. For critical applications, test compatibility with the exact chemical or consult the polyamide material datasheet.

Can Insert DIN 3015 heavy duty, polyamide, type 201 be used for outdoor installations exposed to UV and weathering?

Insert DIN 3015 heavy duty, polyamide, type 201 can be used outdoors with caution. The product is made of selfâextinguishing polyamide and is rated for an operating temperature range of â40Â°C to +180Â°C, which covers typical temperature extremes encountered outdoors. However, the description does not state UV stabilization or specific resistance to longâterm weathering (sunlight, rain, snow, ozone). Standard polyamide (nylon) can degrade over time when exposed to prolonged UV radiation and moisture, leading to surface embrittlement, loss of mechanical strength and possible color changes unless it contains UV stabilizers or additives. Recommended approach: - If the manufacturer explicitly confirms UV stabilization or outdoor suitability for Insert DIN 3015 heavy duty, polyamide, type 201, it is acceptable for outdoor installations. - If no such confirmation is available, consider protective measures: use a UVâresistant coating, place the clamp in shaded/less exposed locations, or choose an insert specified for outdoor/UV exposure (e.g., UVâstabilized polyamide or alternative materials like stainless steel inserts). - For critical applications (safety, structural loads, long service life), request technical data from the supplier: UV resistance tests, weathering/aging data (ISO/EN standards), tensile/break strength after UV exposure, and recommended maintenance/inspection intervals. In summary: the temperature rating supports outdoor use, but lack of explicit UV/weathering data means you should verify UV stabilization with the supplier or select a material explicitly rated for prolonged outdoor exposure before installing Insert DIN 3015 heavy duty, polyamide, type 201 outdoors.

Insert DIN 3015 heavy duty, polyamide, type 201

All products, Clamps for hydraulic pipes/

Additional information

Material	P – material (plastic)

Two-part insert for clamp DIN 3015 type 201 made according to standard DIN 3015. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: self-extinguishing polyamide. Operating temperature: from -40°C to +180°C.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TC-PA201-106,4X	DIN3015 heavy PA pipe support 6.4 mm	-	-
TC-PA201-106X	DIN3015 heavy PA insert, 6 mm tube	-	-
TC-PA201-108X	DIN3015 heavy PA insert for 8 mm pipe	-	-
TC-PA201-109,5X	DIN3015 heavy PA insert, 9.5 mm tube	-	-
TC-PA201-110X	DIN3015 heavy PA insert for 10 mm pipe	-	-
TC-PA201-112,7X	DIN3015 heavy PA insert for 12.7 mm pipe	-	-
TC-PA201-112X	DIN3015 heavy PA pipe support 12 mm	-	-
TC-PA201-113,5X	DIN3015 heavy PA insert for 13.5 mm pipe	-	-
TC-PA201-114X	DIN3015 heavy PA insert for 14 mm pipe	-	-
TC-PA201-115X	DIN3015 heavy PA insert for 15 mm pipe	-	-
TC-PA201-116X	DIN3015 heavy PA insert for 16 mm pipe	-	-
TC-PA201-117,2X	DIN3015 heavy PA pipe support 17.2 mm	-	-
TC-PA201-118X	DIN3015 heavy PA insert for 18 mm pipe	-	-
TC-PA201-219X	DIN3015 heavy PA insert for 19 mm pipe	-	-
TC-PA201-220X	DIN3015 heavy PA insert for 20 mm pipe	-	-
TC-PA201-221,3X	DIN3015 heavy PA insert for 21.3 mm pipe	-	-
TC-PA201-222X	DIN3015 heavy PA insert for 22 mm pipe	-	-
TC-PA201-225,4X	DIN3015 heavy PA insert for 25.4 mm pipe	-	-
TC-PA201-225X	DIN3015 heavy PA pipe support 25 mm	-	-
TC-PA201-226,9X	DIN3015 heavy PA pipe support for 26.9 mm pipe	-	-
TC-PA201-228X	DIN3015 heavy PA pipe support 28 mm	-	-
TC-PA201-230X	DIN3015 heavy PA insert for 30 mm pipe	-	-
TC-PA201-330X	DIN3015 heavy PA insert for 30 mm pipe	-	-
TC-PA201-332X	DIN3015 heavy PA insert for 32 mm pipe	-	-
TC-PA201-333,7X	DIN3015 heavy PA insert for 33.7 mm pipe	-	-
TC-PA201-335X	DIN3015 heavy PA insert for 35 mm pipe	-	-
TC-PA201-338X	DIN3015 heavy PA pipe support 38 mm	-	-
TC-PA201-340X	DIN3015 heavy PA insert for 40 mm pipe	-	-
TC-PA201-342,4X	DIN3015 heavy PA insert for 42.4 mm pipe	-	-
TC-PA201-342X	DIN3015 heavy PA insert for 42 mm pipe	-	-
TC-PA201-438X	DIN3015 heavy PA insert for 38 mm pipe	-	-
TC-PA201-442,4X	DIN3015 heavy PA insert for 42.4 mm pipe	-	-
TC-PA201-442X	DIN3015 heavy PA insert for 42 mm pipe	-	-
TC-PA201-444,5X	DIN3015 heavy PA insert for 44.5 mm pipe	-	-
TC-PA201-448,3X	DIN3015 heavy PA insert for 48.3 mm pipe	-	-
TC-PA201-450,8X	DIN3015 heavy PA insert for 50.8 mm pipe	-	-
TC-PA201-450X	DIN3015 heavy PA insert for 50 mm pipe	-	-
TC-PA201-455X	DIN3015 heavy PA insert for 55 mm pipe	-	-
TC-PA201-457X	DIN3015 heavy PA insert for 57 mm pipe	-	-
TC-PA201-460,3X	DIN3015 heavy PA insert for 60.3 mm pipe	-	-
TC-PA201-463,5X	DIN3015 heavy PA insert for 63.5 mm pipe	-	-
TC-PA201-465X	DIN3015 heavy PA insert for 65 mm pipe	-	-
TC-PA201-470X	DIN3015 heavy PA pipe support 70 mm	-	-
TC-PA201-565X	DIN3015 heavy PA insert for 65 mm pipe	-	-
TC-PA201-570X	DIN3015 heavy PA insert for 70 mm pipe	-	-
TC-PA201-575X	DIN3015 heavy PA insert for 75 mm pipe	-	-
TC-PA201-576,1X	DIN3015 heavy PA insert for pipe 76.1 mm	-	-
TC-PA201-580X	DIN3015 heavy PA insert for 80 mm pipe	-	-
TC-PA201-582,5X	DIN3015 heavy PA insert for 82.5 mm pipe	-	-
TC-PA201-588,9X	DIN3015 heavy PA insert for 88.9 mm pipe	-	-

Two-part insert for clamp DIN 3015 type 201 made according to standard DIN 3015. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: self-extinguishing polyamide. Operating temperature: from -40°C to +180°C.