Multiple bottom plate for DIN 3015 standard clamp
Multiple lower plate for welding for the assembly of DIN 3015 standard type 100/101. For size group 0 ÷ 3, number of clamps: 10. For size group 4 ÷ 5, number of clamps: 5. For size group 0, there is one hole for a screw. For size group 1 ÷ 6, there are two holes for screws. Material: carbon steel or AISI 316L steel.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| TC-APIM-0 | Multiple bottom plate standard thickness 0 | - | - | |
| TC-APIM-0-SS | Multiple bottom plate, standard thickness 0, AISI 316L | - | - | |
| TC-APIM-1 | Multiple bottom plate standard thickness 1 | - | - | |
| TC-APIM-1-SS | Multiple bottom plate, standard thickness 1, AISI 316L | - | - | |
| TC-APIM-2 | Multiple bottom plate standard thickness 2 | - | - | |
| TC-APIM-2-SS | Multiple bottom plate, standard thickness 2, AISI 316L | - | - | |
| TC-APIM-3 | Multiple bottom plate standard thickness 3 | - | - | |
| TC-APIM-3-SS | Multiple bottom plate, standard, thickness 3, AISI 316L | - | - | |
| TC-APIM-4 | Multiple bottom plate standard thickness 4 | - | - | |
| TC-APIM-4-SS | Multi-layer bottom plate, standard, thickness 4, AISI 316L | - | - | |
| TC-APIM-5 | Multiple bottom plate standard thickness 5 | - | - | |
| TC-APIM-5-SS | Multiple bottom plate, standard, thickness 5, AISI 316L | - | - | |
| TC-APIM-6 | Multiple bottom plate standard thickness 6 | - | - | |
| TC-APIM-6-SS | Multiple bottom plate, standard, thickness 6, AISI 316L | - | - |
Multiple lower plate for welding for the assembly of DIN 3015 standard type 100/101. For size group 0 ÷ 3, number of clamps: 10. For size group 4 ÷ 5, number of clamps: 5. For size group 0, there is one hole for a screw. For size group 1 ÷ 6, there are two holes for screws. Material: carbon steel or AISI 316L steel.
Additional information
| Material | CS – steel (cast iron) |
|---|
Additional information
| Material | CS – steel (cast iron) |
|---|
