Can Plug DN 9 quick connector double, TST 090 series, brass be used with hot oil and steam at 25 bar?

Yes. Plug DN 9 quick connector double, TST 090 series, brass can be used with hot oil and steam at 25 bar. The product description explicitly states suitability for hot oil and steam and specifies a working pressure of 25 bar. Material is brass and the flow diameter is 9 mm, matching the DN 9 designation. Caveats to verify before use: - Confirm maximum temperature limits for the specific brass alloy and any internal seals (temperature ratings for steam and hot oil can exceed metal-only limits). - Ensure compatibility of any seal materials (O-rings, gaskets) with the specific oil type and steam conditions. - Confirm installation, maintenance, and safety standards for your application (thermal expansion, pressure cycling, and corrosion considerations).

Is Plug DN 9 quick connector double, TST 090 series, brass suitable for use with water in industrial cleaning machines?

Yes. Plug DN 9 quick connector double, TST 090 series, brass is suitable for use with water in industrial cleaning machines. Description states it can be used for water in cleaning machines and supports hot oil and steam, has a 9 mm flow diameter, working pressure up to 25 bar, and is made of brass-appropriate for typical industrial cleaning water applications within those pressure and temperature limits. Ensure compatibility with any specific water chemistry (corrosive additives) and confirm operating temperature does not exceed manufacturer recommendations.

Can Plug DN 9 quick connector double, TST 090 series, brass withstand continuous use at 25 bar in injection mold cooling?

Yes. Plug DN 9 quick connector double, TST 090 series, brass is specified for a working pressure of 25 bar and a flow diameter of 9 mm, and the product description explicitly lists applications including continuous use in injection mold cooling. Constructed from brass and rated for water, hot oil and steam, it is designed to withstand continuous operation at that pressure in typical mold cooling and die-casting systems. Important caveats: ensure the connector is installed and maintained according to manufacturer instructions, verify compatibility with your specific fluid temperature and chemistry, confirm seals and mating couplings are rated for 25 bar and continuous use, and account for system transient pressures (water hammer) which can exceed nominal working pressure. If your process involves higher temperatures, aggressive fluids, or frequent pressure spikes, consult the manufacturer or perform a system engineering check before prolonged operation.

Plug DN 9 quick connector double, TST 090 series, brass

Additional information

Material	B – brass (bronze)

DN 9 quick coupling plug double (coupling). Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 9 mm. Working pressure: 25 bar. Material: brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
FW-090-HEF090	Double connector series 090 / series 090	-	25	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DN 9 quick coupling plug double (coupling). Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 9 mm. Working pressure: 25 bar. Material: brass.