Is the Quick coupling socket for injection molds with hose end and valve, DYROS series 6 compatible with other 1/4" cooling hose fittings and standard mold cooling systems?

The Quick coupling socket for injection molds with hose end and valve, DYROS series 6 is designed for cooling circuits and uses a 1/4" hose end. Given its 1/4" hose connection and standard construction (brass body, stainless steel retaining parts, Viton seals, 15 bar working pressure), it will generally be compatible with other 1/4" cooling hose fittings and standard mold cooling systems that use the same nominal size and standard hose/barb or threaded interfaces. Compatibility caveats: - Ensure mating fittings use the same 1/4" standard (barbed hose, BSP/NPT thread, or quick-coupler standard); mismatched thread types or nonstandard barb dimensions can leak or not fit. - Verify seal material and temperature/chemical compatibility (Viton is suitable for most cooling liquids but confirm for specific fluids). - Confirm pressure rating: DYROS series 6 is rated to 15 bar; ensure the system does not exceed this. - For quick-change couplings, ensure the counterpart uses the same coupling series or standard to ensure proper shut-off valve operation. In summary: likely compatible with other 1/4" cooling hose fittings and standard mold cooling systems if fittings, thread standards, sealing and pressure requirements match.

Can Quick coupling socket for injection molds with hose end and valve, DYROS series 6 be used with non-brass fittings or different sealing materials under 15 bar?

Quick coupling socket for injection molds with hose end and valve, DYROS series 6 is specified as constructed with all components made of brass, retaining rings/springs/balls of treated stainless steel, and Viton seals, with a working pressure of 15 bar. Using nonâbrass fittings or different sealing materials would deviate from manufacturer specifications and may compromise mechanical compatibility, corrosion resistance and sealing performance at up to 15 bar. If you plan alternative materials, consult the manufacturer for compatibility and reârating; otherwise do not substitute materials for use at the specified 15 bar.

Does Quick coupling socket for injection molds with hose end and valve, DYROS series 6 require specific maintenance intervals for cooling applications?

Quick coupling socket for injection molds with hose end and valve, DYROS series 6 does not specify mandatory fixed maintenance intervals in the provided description, but because it is used for cooling liquids in molds and works at up to 15 bar, regular preventive maintenance is recommended to ensure reliable performance and prevent leaks or failures. Recommended practices: - Visual inspection: check external condition, hose connection, seals and valve operation before each production shift or at least daily in continuous use. - Functional check: operate the coupling under normal pressure to verify tight sealing and smooth shut-off; perform weekly or per production cycle depending on usage intensity. - Seal inspection/replacement: Viton seals resist many fluids and temperatures, but inspect for wear, hardening or swelling every 1â3 months; replace proactively if signs of degradation appear. - Internal parts: retaining rings, springs and balls are stainless steel-treated, but scale, corrosion or particulates can accumulate. Clean and inspect internal parts every 3â6 months or sooner in harsh water or aggressive-fluid conditions. - Cleaning: flush cooling circuits and couplings periodically to remove deposits; frequency depends on water quality and system contamination (commonly monthly to quarterly). - Leak and pressure testing: perform pressure checks up to working pressure (15 bar) after maintenance or seal replacement. - Recordkeeping: log inspections, replacements and any incidents to tailor interval timing to your operating conditions. Adjust intervals based on operating factors: fluid type and quality, temperature, pressure cycles, duty cycle, and production criticality. For safety-critical or high-duty applications, increase inspection frequency and keep spare Viton seals and serviceable components on hand. If available, follow any additional manufacturer service recommendations.

Quick coupling socket for injection molds with hose end and valve, DYROS series 6

Additional information

Material	B – brass (bronze)

Quick coupling socket DYROS series 6 with hose end and shut-off valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-LK614	DN 6 socket with 1/4" hose end, with valve	6	15	In stock	Enquiry
DY-LK615	DN 6 socket with 5/16" hose end, with valve	8	15	In stock	Enquiry
DY-LK616	DN 6 socket with 3/8" hose end, with valve	10	15	In stock	Enquiry
DY-LK618	DN 6 socket with 1/2" hose connection, with valve	12	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling socket DYROS series 6 with hose end and shut-off valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.