Is the DPC heavy-duty twin-screw clamp, stainless steel suitable for reinforced industrial hoses and what torque should be applied when tightening with an Allen key?

Yes. The DPC heavy-duty twin-screw clamp, stainless steel is specifically recommended for thick-walled, reinforced industrial hoses. Its double-band, joint-closure design with two screws and full pins provides a precise, secure connection able to withstand heavy loads; rolled bridge edges protect the hose surface. All components are AISI 316 stainless steel, suitable for demanding industrial and corrosive environments. Tightening: screws are tightened with an Allen key. While the product description does not specify an exact torque value, typical practice for AISI 316 twin-screw hose clamps of this size (20 mm and 24 mm band widths) is to apply a controlled torque in the range of 4â8 Nm to ensure a reliable seal without deforming the hose or clamp. For critical applications, follow hose and fitting manufacturer torque recommendations or contact the clamp supplier for a manufacturer-specified torque.

Does the DPC heavy-duty twin-screw clamp, stainless steel resist corrosion in marine environments?

Yes. The DPC heavy-duty twin-screw clamp, stainless steel is made entirely of AISI 316 stainless steel, which offers superior corrosion resistance in marine and chloride-rich environments. Its robust two-bolt, double-band design with full pins and rolled edges protects the hose and maintains a tight seal, while the 316 material resists pitting and crevice corrosion common in seawater. For longest life in continuous submersion or highly aggressive marine conditions, periodic inspection and maintenance are still recommended.

Can the DPC heavy-duty twin-screw clamp, stainless steel be used for high-pressure hydraulic hose connections?

Yes. the DPC heavy-duty twin-screw clamp, stainless steel is suitable for many high-pressure hydraulic hose connections, with some important caveats. Why itâs appropriate: - Heavy-duty two-bolt, double-band design with joint closure and full pins provides a very secure, even compression around thick-walled, reinforced industrial hoses. the type typically used with high-pressure hydraulics. - Bands are wide (20 mm and 24 mm) and have rolled edges to avoid cutting or nicking the hose cover, preserving hose integrity under pressure. - All components are AISI 316 stainless steel, giving excellent corrosion resistance and strength for demanding environments. - Markings for minimum and maximum diameters help ensure correct sizing; correct fit is critical for high-pressure applications. - Tightening via Allen key with two screws allows precise, evenly distributed torque. Limitations and recommendations: - The clamp is designed for thick-walled, reinforced industrial hoses but final suitability depends on the hoseâs and fittingâs specific pressure ratings and standards. Always match clamp size and placement to the hose/fitting manufacturerâs recommendations. - Verify that the clampâs clamping force and contact width meet the hydraulic assemblyâs required burst and working pressures. For extreme high-pressure systems, manufacturers sometimes specify crimped ferrules or swaged fittings rather than screw clamps. - Ensure correct torque on both screws and check periodically for loosening, especially under vibration. Conclusion: DPC heavy-duty twin-screw clamp, stainless steel can be used for many high-pressure hydraulic hose connections when correctly sized and torqued, but confirm compatibility with the hose/fitting pressure ratings and consider manufacturer-prescribed termination methods for very high-pressure or safety-critical systems.

DPC heavy-duty twin-screw clamp, stainless steel

All products, Clamps for mounting ends/

Additional information

Material	SS – stainless steel

Strong two-bolt clamp with double band and joint closure for heavy loads. Two screws and full pins ensure a precise and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band with a width of 20 mm and 24 mm. The rolled edges of the bridges prevent damage to the hose surface. The clamp features markings on the band for minimum and maximum diameter as well as material. Tightening of screws is done using an Allen key. All components are made of AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-DPC-035-045-W5	DPC clamp 35÷45 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-040-050-W5	DPC clamp 40÷50 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-045-055-W5	DPC clamp 45÷55 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-050-060-W5	DPC clamp 50÷60 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-055-065-W5	DPC clamp 55÷65 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-060-070-W5	DPC clamp 60÷70 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-065-075-W5	DPC clamp 65÷75 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-070-080-W5	DPC clamp 70÷80 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-075-085-W5	DPC clamp 75÷85 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-080-090-W5	DPC clamp 80÷90 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-085-095-W5	DPC clamp 85÷95 mm, width 20 mm, W5	-	-	In stock	Enquiry
AB-DPC-090-100-W5	DPC clamp 90÷100 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-095-105-W5	DPC clamp 95÷105 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-100-110-W5	DPC clamp 100÷110 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-105-115-W5	DPC clamp 105÷115 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-110-120-W5	DPC clamp 110÷120 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-115-125-W5	DPC clamp 115÷125 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-120-130-W5	DPC clamp 120÷130 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-125-135-W5	DPC clamp 125÷135 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-130-140-W5	DPC clamp 130÷140 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-135-145-W5	DPC clamp 135÷145 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-140-150-W5	DPC clamp 140÷150 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-145-155-W5	DPC clamp 145÷155 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-150-160-W5	DPC clamp 150÷160 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-155-165-W5	DPC clamp 155÷165 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-160-170-W5	DPC clamp 160÷170 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-165-175-W5	DPC clamp 165÷175 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-170-180-W5	DPC clamp 170÷180 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-180-190-W5	DPC clamp 180÷190 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-190-200-W5	DPC clamp 190÷200 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-200-210-W5	DPC clamp 200÷210 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-210-220-W5	DPC clamp 210÷220 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-220-230-W5	DPC clamp 220÷230 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-230-240-W5	DPC clamp 230÷240 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-240-250-W5	DPC clamp 240÷250 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-250-260-W5	DPC clamp 250÷260 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-260-270-W5	DPC clamp 260÷270 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-270-280-W5	DPC clamp 270÷280 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-280-290-W5	DPC clamp 280÷290 mm, width 24 mm, W5	-	-	In stock	Enquiry
AB-DPC-290-300-W5	DPC clamp 290÷300 mm, width 24 mm, W5	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Strong two-bolt clamp with double band and joint closure for heavy loads. Two screws and full pins ensure a precise and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band with a width of 20 mm and 24 mm. The rolled edges of the bridges prevent damage to the hose surface. The clamp features markings on the band for minimum and maximum diameter as well as material. Tightening of screws is done using an Allen key. All components are made of AISI 316 steel.