Is the Extremely abrasion-resistant ORINOCO HPÂ® sandblasting hose safe for use with conductive media and does it have antistatic properties?

Yes. The Extremely abrasion-resistant ORINOCO HPÂ® sandblasting hose is safe for use with conductive media and has antistatic properties. Both the inner and outer layers are antistatic, preventing accumulation of electric charges, and the hose is designed for highly abrasive conductive media (quartz sand, steel shot, corundum, glass) in abrasive blasting applications. Specifications (e.g., thick NR/SBR inner layer, synthetic cord reinforcement, working pressure 12 bar, temperature range â40Â°C to +80Â°C) support heavy-duty, safe use in such environments.

Can the Extremely abrasion-resistant ORINOCO HPÂ® sandblasting hose be used continuously at 12 bar and within its -40Â°C to +80Â°C operating range?

Yes. The Extremely abrasion-resistant ORINOCO HPÂ® sandblasting hose is rated for a working pressure of 12 bar and an operating temperature range of -40Â°C to +80Â°C, so it can be used continuously at 12 bar within that temperature range. Its thick NR/SBR inner layer (40Â±5 mmÂ³ abrasion resistance per ISO 4649), antistatic inner and outer layers, and synthetic cord reinforcement are designed for continuous abrasive sandblasting service at those conditions.

Does the Extremely abrasion-resistant ORINOCO HPÂ® sandblasting hose require special nozzles for optimal performance?

Yes. The Extremely abrasion-resistant ORINOCO HPÂ® sandblasting hose is supplied fitted with special nozzles for sandblasting, indicating that optimal performance relies on using these dedicated nozzles. The hoseâs designâthick, highly abrasion-resistant NR/SBR inner layer, antistatic inner and outer layers, and reinforcementâsupports heavy-duty abrasive media (quartz sand, steel shot, corundum, glass). Using the appropriate sandblasting nozzles ensures correct flow, wear distribution, and safety (preventing excessive backpressure or uneven wear), so for best results you should use the supplied or other specially designed sandblasting nozzles compatible with the hose.

Extremely abrasion-resistant ORINOCO HP® sandblasting hose

All products, Bulk material transfer hoses/

Additional information

Material	SBR/NR – a mixture of SBR and NR rubber
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	40, 60 / 120
Reinforcement	synthetic braid

Pressure hose for sandblasting, extremely resistant to abrasion. Thick inner layer made of rubber with exceptionally good abrasion resistance (40±5 mm³ according to ISO 4649 / DIN 53516). Exceeds the requirements of ISO 3861:2008 standard. The inner and outer layers are antistatic, preventing the accumulation of electric charges. Used for highly abrasive materials such as quartz sand, steel shot, corundum, glass in abrasive blasting of steel structures, castings, concrete surfaces, etc. Fitted with special nozzles for sandblasting. Standard length: 60 m / 40 m for a diameter of 16 mm (or 120 m – contact Tubes International). Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 12 bar. Operating temperature: from -40°C to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
IV-ORINOCOHP-13	ORINOCO HP hose 13x27 mm	12	12	In stock	Enquiry
IV-ORINOCOHP-16	ORINOCO HP hose 16x30 mm	16	12	In stock	Enquiry
IV-ORINOCOHP-19	ORINOCO HP hose 19x33 mm	20	12	In stock	Enquiry
IV-ORINOCOHP-25	ORINOCO HP hose 25x39 mm	25	12	In stock	Enquiry
IV-ORINOCOHP-32	ORINOCO HP hose 32x48 mm	32	12	In stock	Enquiry
IV-ORINOCOHP-38	ORINOCO HP hose 38x54 mm	38	12	In stock	Enquiry
IV-ORINOCOHP-42	ORINOCO HP hose 42x60.5 mm	40	12	In stock	Enquiry
IV-ORINOCOHP-50	ORINOCO HP hose 50x70 mm	50	12	In stock	Enquiry
IV-ORINOCOHP-60	ORINOCO HP hose 60x80 mm	60	12	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Pressure hose for sandblasting, extremely resistant to abrasion. Thick inner layer made of rubber with exceptionally good abrasion resistance (40±5 mm³ according to ISO 4649 / DIN 53516). Exceeds the requirements of ISO 3861:2008 standard. The inner and outer layers are antistatic, preventing the accumulation of electric charges. Used for highly abrasive materials such as quartz sand, steel shot, corundum, glass in abrasive blasting of steel structures, castings, concrete surfaces, etc. Fitted with special nozzles for sandblasting. Standard length: 60 m / 40 m for a diameter of 16 mm (or 120 m – contact Tubes International). Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 12 bar. Operating temperature: from -40°C to +80°C.

Additional information

Material	SBR/NR – a mixture of SBR and NR rubber
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	40, 60 / 120
Reinforcement	synthetic braid