Is the FERRARI lever connector plug with male thread, carbon steel, type F.15 suitable for use in wastewater treatment and groundwater drainage at temperatures from -20Â°C to +50Â°C?

Yes. The FERRARI lever connector plug with male thread, carbon steel, type F.15 is specified for use in groundwater drainage and wastewater treatment and its rated operating temperature range is from -20Â°C to +50Â°C. Its construction from galvanized carbon steel and the manufacturerâs intended application list (agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment, sewage disposal, environmental protection) indicate it is suitable for those uses within the stated temperature limits. Ensure compatibility with the specific chemical and mechanical conditions of your installation (e.g., exposure to aggressive chemicals, prolonged immersion, pressure and mechanical stress) and follow applicable standards and maintenance practices.

Can the FERRARI lever connector plug with male thread, carbon steel, type F.15 be used in agricultural and horticultural drainage systems?

Yes. The FERRARI lever connector plug with male thread, carbon steel, type F.15 is explicitly specified for use in agriculture and horticulture and for groundwater drainage, wastewater treatment and environmental protection, so it is suitable for agricultural and horticultural drainage systems. Its carbon steel, galvanized construction and operating temperature range of -20Â°C to +50Â°C make it appropriate for typical outdoor drainage conditions; however, verify chemical compatibility (e.g., aggressive fertilizers or saline conditions) and local standards before installation.

Does the FERRARI lever connector plug with male thread, carbon steel, type F.15 resist corrosion in saline or coastal environments?

The FERRARI lever connector plug with male thread, carbon steel, type F.15 offers galvanized carbon steel construction, which provides basic protection against corrosion. However, for saline or coastal environments (high chloride exposure, salt spray, high humidity) galvanized coating alone is generally insufficient for long-term corrosion resistance. Chloride ions accelerate corrosion of carbon steel even when galvanized, leading to more rapid coating breakdown, undercutting and eventual substrate corrosion. Practical implications: - Short-term or occasional exposure to coastal conditions may be acceptable, but performance and service life will be significantly shorter than in non-corrosive environments. - For continuous, long-term exposure to saline or marine atmospheres, stainless steel (e.g., AISI 316) or specially coated/treated materials are recommended instead of galvanized carbon steel. - If you must use the FERRARI lever connector plug with male thread, carbon steel, type F.15 in such environments, consider additional protective measures: regular inspection and maintenance, application of supplemental corrosion-resistant coatings, protective paints, sacrificial anodes, or installing in sheltered locations to minimize direct salt exposure. Conclusion: The FERRARI lever connector plug with male thread, carbon steel, type F.15 is not ideal for long-term use in saline or coastal environments; choose stainless steel or enhanced corrosion protection for reliable performance.

A FERRARI lever coupling plug with a thread external, steel carbon, type F.15

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

A FERRARI lever coupling plug with a thread external BSP, type F.15, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-F15-048-150	Plug FERRARI 48 mm with 1.1/2" male	-	10	In stock	Enquiry
OM-F15-060-200	Plug FERRARI 60 mm with 2" male	-	10	In stock	Enquiry
OM-F15-080-300	Plug FERRARI 80 mm with 3" male	-	9	In stock	Enquiry
OM-F15-100-250	Plug FERRARI 100 mm with 2.1/2" male	-	8	In stock	Enquiry
OM-F15-100-400	Plug FERRARI 100 mm with 4" male	-	8	In stock	Enquiry
OM-F15-120-250	Plug FERRARI 120 mm with 2.1/2" male	-	7	In stock	Enquiry
OM-F15-120-500	Plug FERRARI 120 mm with 5" male	-	7	In stock	Enquiry
OM-F15-150-600	Plug FERRARI 150 mm with 6" male	-	6	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A FERRARI lever coupling plug with a thread external BSP, type F.15, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Operating temperature: from -20°C to +50°C.