Is the 90Â° flat nozzle with holes for coolant, 1/4" system, JETON compatible with coolants at operating temperatures up to +65Â°C and pressures up to 3 bar?

Yes. The 90Â° flat nozzle with holes for coolant, 1/4" system, JETON is specified for working pressures up to 3 bar and operating temperatures up to +65Â°C, so it is compatible with coolant use within those limits.

Can the 90Â° flat nozzle with holes for coolant, 1/4" system, JETON be used with acetal-compatible hoses and fittings?

Yes. The 90Â° flat nozzle with holes for coolant, 1/4" system, JETON is made of acetal, so it is compatible with acetal hoses and fittings. Its 1/4" system connection and working pressure up to 3 bar, plus operating temperature up to +65Â°C, match typical acetal-compatible components. Ensure hose/fitting internal diameters accommodate the nozzleâs six 2.3 mm holes for optimal flow and verify pressure/temperature ratings of the hoses and fittings used to maintain system safety and performance.

Does the 90Â° flat nozzle with holes for coolant, 1/4" system, JETON require special maintenance due to acetal material?

No special maintenance is required solely because the 90Â° flat nozzle with holes for coolant, 1/4" system, JETON is made of acetal. Acetal is a durable engineering thermoplastic with good dimensional stability, wear resistance and low water absorption, suitable for coolant applications within the productâs specified limits (working pressure up to 3 bar, operating temperature up to +65Â°C). Standard care recommendations: - Inspect periodically for clogging: six holes (Ã 2.3 mm) can collect chips or deposits; flush with coolant or blow out with compressed air as needed. - Check for physical damage or cracking: acetal is tough but can be damaged by impact or excessive mechanical stress. - Avoid exposure above +65Â°C and pressures above 3 bar to prevent deformation or reduced performance. - Prevent prolonged contact with aggressive chemicals not compatible with acetal (strong acids, bases or certain solvents); consult chemical compatibility if special coolants are used. - Replace if threads or sealing surfaces are worn to avoid leaks. Following normal inspection and cleaning routines for coolant nozzles is sufficient; no specialized maintenance procedures are required because of the acetal material.

Nozzle 90° flat with holes for coolant, system 1/4″, JETON

Air and water hoses, All products/

Additional information

Nozzle 90° flat with holes for hoses for coolant JETON – system 1/4″. 6 holes o diameter 2.3 mm. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-82226	Nozzle 90° flat with holes 6x2.3 mm (system 1/4")	-	3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Nozzle 90° flat with holes for hoses for coolant JETON – system 1/4″. 6 holes o diameter 2.3 mm. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.