Is the Flat nozzle with adjustable head with holes for coolant, 1/4" system, JETON available with 1 mm and 1.5 mm hole diameters and suitable for pressures up to 3 bar and temperatures up to +65Â°C?

Yes. The Flat nozzle with adjustable head with holes for coolant, 1/4" system, JETON is available with hole diameters of 1 mm and 1.5 mm, and is specified for working pressures up to 3 bar and operating temperatures up to +65Â°C.

Can the Flat nozzle with adjustable head with holes for coolant, 1/4" system, JETON be used with acetal-compatible coolants and fittings?

Yes. The Flat nozzle with adjustable head with holes for coolant, 1/4" system, JETON is made of acetal, rated to operate up to 3 bar and +65Â°C, so it is compatible with acetal-compatible coolants and fittings. Ensure coolant chemistry is safe for acetal (avoid strong acids/bleaches) and confirm fittings match the 1/4" JETON system and pressure/temperature limits.

Does the Flat nozzle with adjustable head with holes for coolant, 1/4" system, JETON allow individual hole sealing or plugging?

Based on the provided description of Flat nozzle with adjustable head with holes for coolant, 1/4" system, JETON, individual sealing or plugging of holes is not explicitly stated. The nozzle is described as having 16 holes of Ã 1 mm or Ã 1.5 mm, made of acetal, for a 1/4" coolant hose system, with working pressure up to 3 bar and operating temperature up to +65Â°C. Typical acetal multiâhole adjustable heads of this type do not include builtâin plugs for individually closing holes; adjustments are usually achieved by rotating or positioning the head to direct flow through specific outlets rather than sealing single holes. If individual hole plugging is required (for example using small caps, screws, or inserts), confirm with the manufacturer or supplier whether compatible plugs or modified versions are available, and ensure any plug material and method are rated for up to 3 bar and +65Â°C.

Flat nozzle with adjustable head with holes for coolant, 1/4″ system, JETON

Air and water hoses, All products/

Additional information

Flat nozzle with adjustable head with 16 holes of diameter Ø 1 mm or Ø 1.5 mm for coolant hoses JETON – system 1/4″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]	Enquiry	Catalogue
JT-82228	Flat nozzle with holes 16x1 mm (1/4" system)	-	3
JT-82229	Flat nozzle with holes 16x1.5 mm (1/4" system)	-	3

Flat nozzle with adjustable head with 16 holes of diameter Ø 1 mm or Ø 1.5 mm for coolant hoses JETON – system 1/4″. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.