Is the CARBUR fuel hose suitable for transporting petrochemical products with up to 50% aromatic compounds and continuous use between -20Â°C and +90Â°C?

Yes. The CARBUR fuel hose is specifically designed for transporting petrochemical products containing up to 50% aromatic compounds and is rated for continuous operation in the temperature range â20Â°C to +90Â°C. Its construction.black NBR rubber inner layer (good resistance to fuels and oils), synthetic braid reinforcement, and black NBR/PVC outer layer (fuel, oil and weather resistant).supports use with fuels and related petrochemical fluids. Available working pressures of 10 or 20 bar should also be considered against your system requirements.

Can CARBUR fuel hose withstand continuous exposure to fuels and oils at working pressures of 10 or 20 bar?

Yes. CARBUR fuel hose is specifically designed for continuous exposure to fuels and oils: its inner layer is black NBR rubber (chemical resistance to fuels), the outer layer is black NBR/PVC rubber resistant to fuels, oils and weather, and it has synthetic braid reinforcement. It is rated for working pressures of 10 or 20 bar and an operating temperature range of -20Â°C to +90Â°C, so it can withstand continuous use with fuels and oils at those pressures within the specified temperature limits.

Can CARBUR fuel hose be used in lubrication systems and oil systems with synthetic braid reinforcement?

Yes. CARBUR fuel hose can be used in lubrication systems and oil systems, provided the system conditions fall within the hoseâs stated specifications. The hose is specifically designed for petrochemical products (including aromatics up to 50%), fuels and oils, and its inner layer is black NBR rubber which is compatible with many lubricants and mineral oils. The synthetic braid reinforcement offers adequate strength for typical lubrication/oil system pressures (available in 10 or 20 bar working pressure). The outer NBR/PVC layer gives resistance to fuels, oils and weather, and the operating temperature range (â20Â°C to +90Â°C) covers most industrial lubrication applications. Recommended checks before installation: - Confirm fluid compatibility with NBR for the specific lubricant or oil in use (especially for certain synthetic or aggressive lubricants). - Ensure required working pressure does not exceed the hoseâs 10 or 20 bar rating. - Verify operating temperature of the application stays within â20Â°C to +90Â°C. - Confirm fittings and installation practices are suitable for synthetic braid reinforced hose. If these conditions are met, CARBUR fuel hose is suitable for lubrication and oil system use.

Hose for fuels CARBUR

All products, Oil and petroleum hoses/

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	90
Minimum operating temperature [°C]	-20
Vacuum resistance	no
Standard length [m]	100, 40, 60, 60/ 120
Reinforcement	synthetic braid

Flexible hose delivery intended for transport products petrochemical o content compounds aromatic up to 50%, fuels, for systems oil, lubrication, etc. Layer outer resistant to action fuels, oils, conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: a synthetic braid. Outer layer: black NBR rubber/PVC. Working pressure: 10 or 20 bar. Operating temperature: od -20°C up to +90°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
IV-CARBUR10-05	Hose CARBUR 10 5x12 mm	5	10	In stock	Enquiry
IV-CARBUR10-06	Hose CARBUR 10 6x13 mm	6	10	In stock	Enquiry
IV-CARBUR10-08	Hose CARBUR 10 8x15 mm	8	10	In stock	Enquiry
IV-CARBUR10-10	Hose CARBUR 10 10x17 mm	10	10	In stock	Enquiry
IV-CARBUR10-13	Hose CARBUR 10 13x20 mm	12	10	In stock	Enquiry
IV-CARBUR10-15	Hose CARBUR 10 15x23 mm	16	10	In stock	Enquiry
IV-CARBUR10-19	Hose CARBUR 10 19x27 mm	20	10	In stock	Enquiry
IV-CARBUR10-25	Hose CARBUR 10 25x35 mm	25	10	In stock	Enquiry
IV-CARBUR20-06	Hose CARBUR 20 6x14 mm	6	20	In stock	Enquiry
IV-CARBUR20-08	Hose CARBUR 20 8x17 mm	8	20	In stock	Enquiry
IV-CARBUR20-10	Hose CARBUR 20 10x19 mm	10	20	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Flexible hose delivery intended for transport products petrochemical o content compounds aromatic up to 50%, fuels, for systems oil, lubrication, etc. Layer outer resistant to action fuels, oils, conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: a synthetic braid. Outer layer: black NBR rubber/PVC. Working pressure: 10 or 20 bar. Operating temperature: od -20°C up to +90°C.

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	90
Minimum operating temperature [°C]	-20
Vacuum resistance	no
Standard length [m]	100, 40, 60, 60/ 120
Reinforcement	synthetic braid