A strong suction-delivery hose intended for unleaded petrol, diesel oil and liquid fuels containing up to 50% aromatic compounds. Used in industry and transport for conveying and handling petrochemical products, in road tankers, at road and rail fuel unloading and loading terminals. Layer inner with black, smooth, antistatic (R ≤ 10 6 Ω) rubber NBR (NBR1). Reinforcement layers high-strength cord and spiral steel. It has two copper wires ensuring electrical continuity between the hose ends – provided they are correctly connected to the ends. Layer outer with black, antistatic (R ≤ 10 6 Ω) rubber synthetic, self-extinguishing, resistant to abrasion, oil, ozone and conditions atmospheric. Resistance through the hose wall R ≤ 10 9 Ω (type M/T). compliant with standards EN12115:11 (16 bar), EN 1761(10 bar), ISO 2929 (10 bar), TRbF. Certified for Ex explosion-hazard zones (ATEX). excellent resistance to action products petrochemical, strong The design and properties antistatic both layer internal and outer, built-in cable antistatic, recommend this hose for demanding applications, also in explosion-hazard zones. In every case, however, use in an explosion-hazard zone (ATEX) should be preceded by a risk analysis carried out by a specialist. A version without a wire (type Ω/T) is available on special order.. Inner layer: black, smooth NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +90°C (momentarily up to +110°C).