Is TU 25 fuel hose suitable for use with compressed air and minor vacuum applications down to ~0.5 bar?

Yes. TU 25 fuel hose is specified for fuels (industrial/mineral oils, unleaded gasoline, diesel, heating oil) and explicitly states it is âalso suitable for compressed air.â Its working pressure is 25 bar and reinforcement (textile braid) gives a safety factor of 3.15:1. The construction includes an NBR inner layer (antistatic R < 10^6 Î©/m), and the specification notes resistance to slight vacuum down to approximately 0.5 bar. Operating temperature range is â40Â°C to +80Â°C. Conclusion: TU 25 fuel hose is suitable for compressed air service and for minor vacuum applications down to about 0.5 bar, within the stated temperature and pressure ratings. Ensure fittings and system design also meet these conditions.

Can TU 25 fuel hose be used with diesel, unleaded petrol and heating oil at temperatures from -40Â°C to +80Â°C?

Yes. TU 25 fuel hose is specified for industrial and mineral oils, unleaded gasoline (EN 228:2017), diesel (EN 590:2010) and heating oil (DIN 51603â1), and its operating temperature range is â40Â°C to +80Â°C. Construction (NBR inner layer, textile braid reinforcement, NBR/EPDM outer layer), antistatic properties (R < 10^6 Î©/m), resistance to oil/ozone/abrasion, 25 bar working pressure and slight vacuum tolerance (~0.5 bar) make it suitable for those fuels and the stated temperature range.

Does the TU 25 fuel hose meet EN 228, EN 590 and DIN 51603 standards for industrial oils and fuels?

Yes. The TU 25 fuel hose is specified for unleaded gasoline (EN 228:2017), diesel fuel (EN 590:2010) and heating oil (DIN 51603â1 to â5) in its description, and its construction and properties support conformity: black NBR inner layer compatible with mineral fuels, antistatic resistance R < 10^6 Î©/m (EN ISO 8031:2009), textile braid reinforcement (safety factor 3.15:1), and an outer NBR/EPDM compound resistant to oil, ozone and weather. Working pressure (25 bar), temperature range (â40 Â°C to +80 Â°C) and resistance to slight vacuum (~0.5 bar) are consistent with typical requirements for industrial fuel hoses meeting those standards.

Hose for fuels TU 25

Q: Can TU 25 fuel hose be used with diesel, unleaded petrol and heating oil at temperatures from -40Â°C to +80Â°C?

Yes. TU 25 fuel hose is specified for industrial and mineral oils, unleaded gasoline (EN 228:2017), diesel (EN 590:2010) and heating oil (DIN 51603â1), and its operating temperature range is â40Â°C to +80Â°C. Construction (NBR inner layer, textile braid reinforcement, NBR/EPDM outer layer), antistatic properties (R < 10^6 Î©/m), resistance to oil/ozone/abrasion, 25 bar working pressure and slight vacuum tolerance (~0.5 bar) make it suitable for those fuels and the stated temperature range.

Q: Does the TU 25 fuel hose meet EN 228, EN 590 and DIN 51603 standards for industrial oils and fuels?

Yes. The TU 25 fuel hose is specified for unleaded gasoline (EN 228:2017), diesel fuel (EN 590:2010) and heating oil (DIN 51603â1 to â5) in its description, and its construction and properties support conformity: black NBR inner layer compatible with mineral fuels, antistatic resistance R < 10^6 Î©/m (EN ISO 8031:2009), textile braid reinforcement (safety factor 3.15:1), and an outer NBR/EPDM compound resistant to oil, ozone and weather. Working pressure (25 bar), temperature range (â40 Â°C to +80 Â°C) and resistance to slight vacuum (~0.5 bar) are consistent with typical requirements for industrial fuel hoses meeting those standards.

All products, Oil and petroleum hoses/

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	100, 50
Reinforcement	textile braid

Flexible hose pressure for oils industrial, mineral, gasoline unleaded (EN 228:2017), oil drive (EN 590:2010), oil heating (DIN 51 603 1÷5). is suitable also for compressed air. Layer inner with black, smooth rubber NBR, antistatic R 6 Ω/m (EN ISO 8031:2009). Reinforcement a braid textile ensures factor safety 3.15 : 1. resistant to small vacuum for ok. 0.5 bar. Layer outer with black, smooth blend rubber NBR / EPDM resistant to oil, ozone, abrasion and conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: textile braid. Outer layer: black NBR rubber/EPDM. Working pressure: 25 bar. Operating temperature: od -40°C up to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SP-TU25-06	Hose TU 25 6x14 mm	6	25	In stock	Enquiry
SP-TU25-08	Hose TU 25 8x16 mm	8	25	In stock	Enquiry
SP-TU25-10	Hose TU 25 10x18 mm	10	25	In stock	Enquiry
SP-TU25-13	Hose TU 25 13x21 mm	12	25	In stock	Enquiry
SP-TU25-16	Hose TU 25 16x25 mm	16	25	In stock	Enquiry
SP-TU25-19	Hose TU 25 19x29 mm	20	25	In stock	Enquiry
SP-TU25-25	Hose TU 25 25x36 mm	25	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Flexible hose pressure for oils industrial, mineral, gasoline unleaded (EN 228:2017), oil drive (EN 590:2010), oil heating (DIN 51 603 1÷5). is suitable also for compressed air. Layer inner with black, smooth rubber NBR, antistatic R 6 Ω/m (EN ISO 8031:2009). Reinforcement a braid textile ensures factor safety 3.15 : 1. resistant to small vacuum for ok. 0.5 bar. Layer outer with black, smooth blend rubber NBR / EPDM resistant to oil, ozone, abrasion and conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: textile braid. Outer layer: black NBR rubber/EPDM. Working pressure: 25 bar. Operating temperature: od -40°C up to +80°C.

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	100, 50
Reinforcement	textile braid