Is the High-pressure hose, for cutting and cleaning with water, Waterblast 1100 bar pressure-tested and supplied with a certificate?

Yes. The High-pressure hose, for cutting and cleaning with water, Waterblast 1100 bar is pressure-tested and supplied with the appropriate certificate. The hose features a black synthetic rubber inner layer, four layers of steel wire reinforcement, and a black oil- and abrasion-resistant synthetic rubber outer layer. Fittings and sleeves are carbon steel, galvanized. Working pressure up to 1100 bar; operating temperature from -10Â°C to +70Â°C.

Can High-pressure hose, for cutting and cleaning with water, Waterblast 1100 bar be used with abrasive additives or only clean water?

High-pressure hose, for cutting and cleaning with water, Waterblast 1100 bar is designed primarily for use with clean water. Its construction (inner synthetic rubber, four layers of steel wire reinforcement, outer oil- and abrasion-resistant rubber) and fittings (galvanized carbon steel) are optimized for high-pressure water cutting and cleaning. Use with abrasive additives (sand, garnet, slurry) is not recommended unless manufacturer explicitly certifies abrasion-resistant inner lining and compatibility of fittings-abrasives will rapidly wear the rubber inner layer and reduce service life, increase leakage risk and may void certification. For abrasive waterjet cutting, use a hose specifically rated and specified for abrasive media.

High-pressure hose, for cutting and cleaning with water, Waterblast 1100 bar

Additional information

Material	CS – steel (cast iron)
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-10
Standard length [m]	2

Ready, flexible, reinforced high-pressure hose with four layers of steel wire, used in water cutting and cleaning devices. Applications of the hose include cleaning chemical and energy installations, cleaning and cutting concrete structures, road surfaces, and cleaning steel surfaces. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black oil and abrasion-resistant synthetic rubber. Material of fittings and sleeves: carbon steel, galvanized. Working pressure: up to 1100 bar. Operating temperature: from -10°C to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
HAWB-13-001-L20M	Waterblast hose DN13 SL-WBL1100-13 Lc=20m 2xGW M24x1.5 WP 1100 bar	12	1100	In stock	0 zł		Enquiry
HAWB-19-002-L20M	Waterblast hose DN19 SL-WBL1100-19 Lc=20m 2xGW M36x2 WP 1100 bar	20	1100	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Ready, flexible, reinforced high-pressure hose with four layers of steel wire, used in water cutting and cleaning devices. Applications of the hose include cleaning chemical and energy installations, cleaning and cutting concrete structures, road surfaces, and cleaning steel surfaces. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black oil and abrasion-resistant synthetic rubber. Material of fittings and sleeves: carbon steel, galvanized. Working pressure: up to 1100 bar. Operating temperature: from -10°C to +70°C.