Is the VIPER high-pressure hose, for hydraulic tools 700 bar, compatible with all standard hydraulic fittings and tools used for spreaders, shears, wrenches, and jacks?

The VIPER high-pressure hose, for hydraulic tools 700 bar, is designed as a ready, complete hose for spreaders, shears, door balancers, wrenches and jacks and therefore is compatible with standard hydraulic tools of that 700 bar class, provided the fittings match the toolâs coupling type and size. Key compatibility points from the product description: - Rated working pressure up to 700 bar, matching high-pressure rescue and hydraulic tool requirements. - Carbon steel, galvanized fittings and sleeves are typical materials used on standard hydraulic fittings; supplied fittings should mate with matching standard connectors. - Bend restrictors at the fittings and high-strength steel braid reinforcement ensure safe operation with common tool movements and loads. - Pressure-tested and supplied with certificate, confirming suitability for 700 bar applications. Limitations and recommendations: - Verify that the hoseâs supplied fitting type (thread, size, and coupling style) exactly matches your tool or adapter; hoses are generally compatible when fitting standards coincide. - Check operating temperature range (â30Â°C to +60Â°C) against your environment. - For non-standard connectors or specific manufacturer proprietary couplings, you may need adapters or bespoke fittings. Conclusion: The VIPER high-pressure hose, for hydraulic tools 700 bar, is compatible with standard 700 bar hydraulic fittings and tools used for spreaders, shears, wrenches, and jacks when the fitting type and size match; confirm connector compatibility before installation.

Does the VIPER high-pressure hose, for hydraulic tools 700 bar, include bend restrictors and come with a pressure test certificate?

Yes. The VIPER high-pressure hose, for hydraulic tools 700 bar, includes bend restrictors at the fittings and is pressure tested; it is supplied with the appropriate pressure test certificate.

Can the VIPER high-pressure hose, for hydraulic tools 700 bar, withstand exposure to hydraulic fluids and UV without degrading?

Yes. The VIPER high-pressure hose, for hydraulic tools 700 bar is designed to resist common hydraulic fluids and outdoor conditions without rapid degradation. Key reasons: - Inner layer of polyamide: polyamide (nylon) offers good chemical compatibility with most hydraulic oils and resists absorption and swelling that would compromise performance. - Reinforcement of multi-layer high-strength steel braid: metal reinforcement is inert to oils and provides structural integrity under pressure, preventing internal collapse or extrusion when exposed to fluids. - Outer layer of fluorescent yellow polyurethane: polyurethane is known for excellent resistance to oils, abrasion, and weathering, including UV exposure, maintaining flexibility and visibility in low light. The specified operating temperature range (-30Â°C to +60Â°C) further indicates material stability under typical field conditions. - Galvanized carbon steel fittings: galvanized steel offers corrosion protection; while prolonged exposure to aggressive chemicals or saltwater can eventually affect galvanization, normal exposure to hydraulic fluids and sunlight should not cause premature failure. - Pressure testing and certification: supplied testing and certificate ensure the hose meets performance standards after assembly, including integrity after exposure during manufacture. Limitations and considerations: - "Hydraulic fluids" covers a range of chemistries (mineral oils, synthetic esters, water-glycol, phosphate esters). While polyamide and polyurethane are broadly compatible with mineral and many synthetic oils, extremely aggressive fluids (certain solvents, concentrated acids/alkalis, or some phosphate esters) may require specific compatibility checks. - Extended, continuous UV exposure over many years can eventually degrade polymers; however, polyurethane outer jackets generally offer good UV resistance compared with many elastomers. - For use in aggressive chemical environments, high-salinity conditions, or with nonstandard fluids, verify compatibility with the fluid manufacturer or request material-specific resistance data. Conclusion: For typical hydraulic oils and normal outdoor/UV exposure, the VIPER high-pressure hose, for hydraulic tools 700 bar will withstand exposure to hydraulic fluids and UV without degrading prematurely. For atypical fluids or extreme environments, confirm chemical compatibility.

VIPER high-pressure hose, for hydraulic tools 700 bar

Additional information

Material	CS – steel (cast iron)
Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-30
Standard length [m]	2

Ready, complete high-pressure hose, based on VIPER hose, intended for 700 bar hydraulic tools such as spreaders, shears, door balancers, wrenches, or jacks, in fluorescent yellow color, highly visible in low light conditions. It is equipped with bend restrictors at the fittings. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: polyamide. Reinforcement: high-strength, multi-layer steel braid. Outer layer: fluorescent yellow polyurethane. Fittings and sleeves material: carbon steel, galvanized. Working pressure: up to 700 bar. Operating temperature: from -30°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HASS-06-001-L10M	Spir Star Hose DN6 SS-HL-Viper Lc=10m 2xGZ 3/8" NPT with bending radius WP 700 bar	6	700	In stock	Enquiry
HASS-06-001-L1M	Spiral Hose Spir Star DN6 SS-HL-Viper Lc=1m 2xGZ 3/8" NPT with bending radius WP 700 bar	6	700	In stock	Enquiry
HASS-06-001-L2M	Spir Star DN6 SS-HL-Viper hose Lc=2m 2xGZ 3/8" NPT with bend restriction WP 700 bar	6	700	In stock	Enquiry
HASS-06-001-L3M	Spir Star DN6 SS-HL-Viper hose Lc=3m 2xGZ 3/8" NPT with bend restriction WP 700 bar	6	700	In stock	Enquiry
HASS-06-001-L5M	Spir Star DN6 SS-HL-Viper hose Lc=5m 2xGZ 3/8" NPT with bend restriction WP 700 bar	6	700	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Ready, complete high-pressure hose, based on VIPER hose, intended for 700 bar hydraulic tools such as spreaders, shears, door balancers, wrenches, or jacks, in fluorescent yellow color, highly visible in low light conditions. It is equipped with bend restrictors at the fittings. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: polyamide. Reinforcement: high-strength, multi-layer steel braid. Outer layer: fluorescent yellow polyurethane. Fittings and sleeves material: carbon steel, galvanized. Working pressure: up to 700 bar. Operating temperature: from -30°C to +60°C.