Is this Lance for high-pressure cleaner, GW inlet M22x1.5, galvanized steel, type MT2 rated for continuous use at 250 bar and 150Â°C?

Yes. Lance for high-pressure cleaner, GW inlet M22x1.5, galvanized steel, type MT2 is rated for continuous use up to 250 bar and 150Â°C according to the provided specifications (working pressure: up to 250 bar; operating temperature: up to +150Â°C).

Can Lance for high-pressure cleaner, GW inlet M22x1.5, galvanized steel, type MT2 be used with fluids at 150Â°C and flows of 40 l/min at 250 bar?

Yes. Lance for high-pressure cleaner, GW inlet M22x1.5, galvanized steel, type MT2 is specified for working pressure up to 250 bar, flow rate 40 l/min and operating temperature up to +150Â°C. Made of galvanized carbon steel, it meets the listed conditions (150Â°C, 40 l/min, 250 bar). Ensure all fittings, seals and connected equipment are rated for these conditions and follow manufacturer installation and safety instructions.

Can Lance for high-pressure cleaner, GW inlet M22x1.5, galvanized steel, type MT2 withstand chemical detergents at 150Â°C and 250 bar?

Lance for high-pressure cleaner, GW inlet M22x1.5, galvanized steel, type MT2 cannot be guaranteed to withstand chemical detergents at 150Â°C and 250 bar based solely on the provided description. Reasoning: - The specification states an operating temperature up to +150Â°C and working pressure up to 250 bar, so the lance meets those limits for plain water/steam use. - Material is carbon steel, galvanized. Galvanization offers corrosion resistance to water and mild chemicals but is not universally resistant to aggressive chemical detergents, especially at elevated temperature and pressure. - Chemical compatibility depends on the specific detergent chemistry (pH, oxidizers, solvents, chlorides, sulfates, etc.). At 150Â°C and 250 bar, chemical attack (degalvanization, corrosion, hydrogen embrittlement) risk increases. - No information is provided on seals, internal coatings, or specific chemical resistance testing of the lance to detergents at that temperature/pressure. Recommendation: - Do not assume compatibility. Contact the manufacturer/supplier for chemical compatibility data or tested operating limits with the specific detergent at 150Â°C and 250 bar. - If manufacturer data is unavailable, perform a controlled compatibility test or consider using a lance made of a material with known resistance to the detergent at high temperature and pressure (e.g., stainless steels or specially coated steels) and certified seals.

Lance for a high-pressure washer, inlet M22x1.5 female, steel galvanized, type MT2

All products, Guns for high-pressure washers/

Additional information

A lance with thermal insulation, type MT2, intended for a high-pressure washer. Connections: (inlet) M22x1.5 female / (outlet) M18x1.5 male. Working pressure: up to 250 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel carbon, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-120009	Lance MT2 700 mm, M22x1.5 female, Fitting swivel, galvanized steel	-	250	In stock	Enquiry
MH-120011	Lance MT2 900 mm, CS, inlet M22x1.5 female / outlet M18x1.5 male	-	250	In stock	Enquiry
MH-120013	Lance MT2 1200 mm, CS, inlet M22x1.5 female / outlet M18x1.5 male	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A lance with thermal insulation, type MT2, intended for a high-pressure washer. Connections: (inlet) M22x1.5 female / (outlet) M18x1.5 male. Working pressure: up to 250 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel carbon, galvanized.