Is the Lance for high-pressure cleaner, inlet GZ M22x1.5, galvanized steel, type MT6 compatible with 280â¯bar systems and 40â¯l/min flow?

Yes . the Lance for high-pressure cleaner, inlet GZ M22x1.5, galvanized steel, type MT6 is compatible. Its working pressure is specified up to 280 bar and its rated flow rate is 40 l/min, matching your 280 bar / 40 l/min system. The inlet GZ M22x1.5 and outlet GW 1/4" NPT are the declared connections; ensure your machine and hose fittings match those thread types or use appropriate adapters. Operating temperature (up to +150Â°C) and galvanized steel construction are also within typical high-pressure washer requirements.

Can the Lance for high-pressure cleaner, inlet GZ M22x1.5, galvanized steel, type MT6 withstand continuous use at 150Â°C?

Yes. The Lance for high-pressure cleaner, inlet GZ M22x1.5, galvanized steel, type MT6 is specified for an operating temperature up to +150Â°C, so it can withstand continuous use at 150Â°C within its rated limits. Ensure all other system components (hoses, seals, fittings) are also rated for 150Â°C and the working pressure (up to 280 bar) and flow conditions (40 l/min). Regular inspections for wear, corrosion of the galvanized steel, and seal degradation are recommended when operating continuously at the upper temperature limit.

Can the Lance for high-pressure cleaner, inlet GZ M22x1.5, galvanized steel, type MT6 be used with 1/4" NPT accessories?

Yes. the Lance for high-pressure cleaner, inlet GZ M22x1.5, galvanized steel, type MT6 can be used with 1/4" NPT accessories on its outlet side. The product specification lists an outlet of GW 1/4" NPT, which is the standard female NPT thread, so compatible 1/4" NPT fittings, nozzles or extensions designed for female/male NPT connections will mate correctly. A few practical notes: - Ensure you match male/female thread orientation correctly (the lance outlet is GW/female 1/4" NPT). - Use appropriate pipe thread sealant or PTFE tape rated for high pressure and temperature to ensure a leak-free joint. - Verify the accessory pressure and temperature ratings meet or exceed the lance limits (up to 280 bar and +150Â°C). - If an adapter between metric (M22) inlet and other thread types is needed, use a pressure-rated adapter; the lance inlet itself is GZ M22x1.5 (not NPT), so adapters must be selected accordingly.

Lance for a high-pressure washer, inlet M22x1.5 male, steel galvanized, type MT6

All products, Guns for high-pressure washers/

Additional information

A lance with a handle, type MT6, intended for a high-pressure washer. Connection: (inlet) M22x1.5 male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-140021	Lance MT6 500 mm, galvanized steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140023	Lance MT6 700 mm, galvanized steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140025	Lance MT6 900 mm, galvanized steel, inlet M22x1.5 male	-	280	In stock	Enquiry
MH-140027	Lance MT6 1200 mm, galvanized steel, inlet M22x1.5 male	-	280	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A lance with a handle, type MT6, intended for a high-pressure washer. Connection: (inlet) M22x1.5 male / (outlet) 1/4″ NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel galvanized.