Is the Hose end with BSPT male thread, stainless steel, type VT123 rated for continuous use at 10 bar working pressure?

Yes. Hose end with BSPT male thread, stainless steel, type VT123 is rated for continuous use at a working pressure of 10 bar according to the provided description. The specification states Working pressure: 10 bar; however, note the dimensions and possibly tolerances may vary slightly by manufacturer.

Can Hose end with BSPT male thread, stainless steel, type VT123 tolerate 10 bar working pressure for hydraulic applications?

Hose end with BSPT male thread, stainless steel, type VT123: Based on the provided description (material AISI 316, working pressure 10 bar, BSPT external thread) this fitting is rated for 10 bar and therefore can tolerate 10 bar working pressure. However, for hydraulic applications confirm system safety factors, dynamic/peak pressures, fluid compatibility, hose and connector matching, torque and sealing method. If application involves pulsation, temperature extremes or higher safety requirements, consult manufacturer specifications and certification before use.

Can Hose end with BSPT male thread, stainless steel, type VT123 be used safely at 10 bar in food-grade applications?

Yes. Hose end with BSPT male thread, stainless steel, type VT123 can be used safely at 10 bar in food-grade applications, with the following caveats and considerations: - Material suitability: AISI 316 stainless steel is widely accepted for food and beverage contact due to its corrosion resistance and cleanability; it is appropriate for food-grade use when correctly manufactured and finished. - Pressure rating: The stated working pressure of 10 bar matches your requirement. Ensure the complete assembly (hose, clamps, fittings) is rated to at least 10 bar with an appropriate safety margin. - Thread type and sealing: BSPT is a tapered thread; correct sealing requires appropriate tape or sealant (food-grade PTFE tape or approved thread sealant) or use of a union/adapter designed for pressure and food applications to avoid leaks. - Manufacturer variability: The dimensions may vary slightly; verify the specific partâs certification, dimensions and tolerances from the supplier to ensure proper fit with your hose and mating components. - Food-grade certification and finish: Confirm the part has relevant food contact certifications (e.g., FDA, EU 1935/2004) and an appropriate surface finish (smooth, free of crevices) to prevent bacterial harborage. Electropolishing is preferred for hygiene-critical applications. - Cleanability and maintenance: Ensure the joint design allows cleaning and CIP (if used). Regular inspection for corrosion, wear, and seal integrity is required. - Traceability and documentation: Obtain material certificates (EN 10204 3.1 or equivalent) and supplier declarations confirming suitability for food contact. If all the above are verified for the specific supplied unit, Hose end with BSPT male thread, stainless steel, type VT123 is suitable for safe use at 10 bar in food-grade applications.

Hose end with BSPT male thread, stainless steel, type VT123

Additional information

Material	SS – stainless steel

Hose end with external BSPT thread. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NM-VT123-02	End fitting with GZ 1/8" BSPT, for hose 1/4", AISI 316	6	10	In stock	Enquiry
NM-VT123-04	End fitting with GZ 1/4" BSPT, for hose 5/16", AISI 316	8	10	In stock	Enquiry
NM-VT123-06	End fitting with GZ 3/8" BSPT, for hose 3/8", AISI 316	10	10	In stock	Enquiry
NM-VT123-08	End fitting with GZ 1/2" BSPT, for hose 1/2", AISI 316	12	10	In stock	Enquiry
NM-VT123-12	End fitting with GZ 3/4" BSPT, for hose 3/4", AISI 316	20	10	In stock	Enquiry
NM-VT123-16	End fitting with 1" BSPT, for 1" hose, AISI 316	25	10	In stock	Enquiry
NM-VT123-20	End fitting with GZ 1.1/4" BSPT, for hose 1.1/4", AISI 316	32	10	In stock	Enquiry
NM-VT123-24	End fitting with GZ 1.1/2" BSPT, for hose 1.1/2", AISI 316	38	10	In stock	Enquiry
NM-VT123-32	End fitting with 2" BSPT, for 2" hose, AISI 316	50	10	In stock	Enquiry
NM-VT123-40	End fitting with GZ 2.1/2" BSPT, for hose 2.1/2", AISI 316	65	10	In stock	Enquiry
NM-VT123-48	3" BSPT end fitting, for 3" hose, AISI 316	75	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose end with external BSPT thread. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.