Is the LUISIANA PU ANTISTATIC regeneration hose safe for transfer of food-grade liquids and compliant with EU food regulations?

Yes. The LUISIANA PU ANTISTATIC regeneration hose is suitable for transfer of food-grade liquids and compliant with relevant EU food regulations. Its inner layer is transparent, abrasionâresistant polyurethane and the product is declared compliant with Regulation (EC) No 1935/2004 and Commission Regulation (EU) No 10/2011 (tested with simulant fluids A, B and C). It also meets Regulation (EC) No 2023/2006 on Good Manufacturing Practice for materials intended to come into contact with food. The hose includes a copper spiral for antistatic discharge (when grounded or fitted), and its construction and working parameters (working pressure 3â5 bar, vacuum up to 0.7 bar, temperature range â10 Â°C to +60 Â°C) make it appropriate for hygienic transfer of liquid food substances, including abrasive regenerates where higher abrasion resistance is needed. Ensure proper grounding of the antistatic wire and follow any manufacturer cleaning and use instructions for specific food applications.

Can LUISIANA PU ANTISTATIC regeneration hose withstand abrasive plastic regrind with sharp edges without premature wear?

Yes. The LUISIANA PU ANTISTATIC regeneration hose is specifically designed for abrasive dry materials and plastic regrind with relatively sharp edges. Its inner layer of transparent, abrasionâresistant polyurethane (0.6â1.0 mm) and hard PVC spiral reinforcement provide high resistance to abrasion, puncture and cutting, while the externally corrugated, internally smooth design supports material flow. The antistatic copper spiral discharges charges when grounded, and working pressures (3â5 bar) plus vacuum rating and -10Â°C to +60Â°C temperature range suit typical processing conditions. For extreme shear or highly angular regrind, verify selected diameter/thickness and perform field testing to confirm expected wear life.

Does LUISIANA PU ANTISTATIC regeneration hose require grounding during pneumatic transfer to prevent static buildup?

Yes. The LUISIANA PU ANTISTATIC regeneration hose includes a copper wire spiral intended to discharge accumulated charge only when the hose is grounded or connected to a conductive end fitting. For pneumatic transfer of dry regenerates (plastic flakes, granules) where friction can generate static, the hose should be grounded/connected to a conductive fitting to prevent dangerous static buildup and ensure the antistatic feature works effectively. Follow grounding best practices: ensure a continuous low-resistance connection to earth, bond hose ends and fittings, and verify conductivity after installation.

Hose for regrind LUISIANA PU ANTISTATIC

All products, Bulk material transfer hoses/

Additional information

Material	PU – polyurethane
Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-10
Vacuum resistance	yes
Standard length [m]	20, 30, 60
Reinforcement	PVC spiral

Strong hose suction-delivery intended for conveying dry or liquid substances abrasive, granulates etc. externally Serrated, inside smooth. Layer inner with transparent, resistant to abrasion polyurethane, o wall thickness od 0.6 mm (DN30) for 1 mm (DN100). The hose has a copper wire arranged along the spiral which, after earthing or connection to an end, discharges electric charges. Widely used in processing plastics in use demanding greater resistance to abrasion, puncturing and cutting hose. especially recommended for regrind plastics o relatively sharp edges. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP) – refers to liquid substances food. Inner layer: transparent polyurethane. Outer layer: transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 5 bar, depending on the diameter hose and temperatures. Vacuum: for 0.7 bar. Operating temperature: -10°C up to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ME-LUISIANA-PUAS-030	Hose LUISIANA PU 30.5 mm, antistatic	30	5	In stock	Enquiry
ME-LUISIANA-PUAS-038	Hose LUISIANA PU 38 mm, antistatic	38	5	In stock	Enquiry
ME-LUISIANA-PUAS-040	Hose LUISIANA PU 40 mm, antistatic	40	5	In stock	Enquiry
ME-LUISIANA-PUAS-050	Hose LUISIANA PU 50 mm, antistatic	50	4	In stock	Enquiry
ME-LUISIANA-PUAS-060	Hose LUISIANA PU 60.5 mm, antistatic	60	4	In stock	Enquiry
ME-LUISIANA-PUAS-070	Hose LUISIANA PU 70.5 mm, antistatic	70	4	In stock	Enquiry
ME-LUISIANA-PUAS-076	Hose LUISIANA PU 76 mm, antistatic	75	3.5	In stock	Enquiry
ME-LUISIANA-PUAS-080	Hose LUISIANA PU 80 mm, antistatic	80	3.5	In stock	Enquiry
ME-LUISIANA-PUAS-090	Hose LUISIANA PU 90 mm, antistatic	90	3.5	In stock	Enquiry
ME-LUISIANA-PUAS-100	Hose LUISIANA PU 100 mm, antistatic	100	3	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Strong hose suction-delivery intended for conveying dry or liquid substances abrasive, granulates etc. externally Serrated, inside smooth. Layer inner with transparent, resistant to abrasion polyurethane, o wall thickness od 0.6 mm (DN30) for 1 mm (DN100). The hose has a copper wire arranged along the spiral which, after earthing or connection to an end, discharges electric charges. Widely used in processing plastics in use demanding greater resistance to abrasion, puncturing and cutting hose. especially recommended for regrind plastics o relatively sharp edges. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP) – refers to liquid substances food. Inner layer: transparent polyurethane. Outer layer: transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 5 bar, depending on the diameter hose and temperatures. Vacuum: for 0.7 bar. Operating temperature: -10°C up to +60°C.

Additional information

Material	PU – polyurethane
Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-10
Vacuum resistance	yes
Standard length [m]	20, 30, 60
Reinforcement	PVC spiral