Does the DKR hydraulic end, type ZBW110, carbon steel have a specific crimping sleeve size or spec required for proper crimping?

DKR hydraulic end, type ZBW110, carbon steel does not specify a single, proprietary crimping sleeve size in the provided description. It is designed to be crimped into hydraulic and industrial hoses using a crimping sleeve suitable for the specific hose type. Therefore the correct sleeve spec depends on the hose construction, inner/outer diameters, and manufacturer recommendations (e.g., wire braid vs. textile reinforcement, number of plies). Use a sleeve and die set matched to the hose series and nominal size, and follow the hose and crimper manufacturer's crimp dimensions and pressure ratings. Also ensure the sleeve material and plating (compatible with the galvanized carbon steel fitting) and the crimping machineâs settings conform to the hose supplierâs approved crimping specification.

What crimping sleeve dimensions and specifications are recommended for the DKR hydraulic end, type ZBW110, carbon steel?

For DKR hydraulic end, type ZBW110, carbon steel: use a crimping sleeve sized to the hose inner diameter and reinforcement layers per manufacturer specs. Typical sleeve material: carbon steel, galvanized, matching the fittingâs 60Â° sealing cone and BSP internal thread geometry. Sleeve length should cover the ferrule engagement area of ZBW110 (consult hose maker), chamfered entry to avoid braid damage. Wall thickness must provide required crimp profile for the hose working pressure-commonly 1.5â2.0 mm for medium-duty hydraulic hoses; heavier hoses may require thicker sleeves. Crimp dimension (collapsed diameter) must match the ZBW110 recommended crimp dimension chart for the specific hose size and type; use corresponding crimping force and die set for the hose series. Verify final assembly by pressure testing per ISO 6805/EN standards.

Is a specific crimping pressure or crimping cycle required for DKR hydraulic end, type ZBW110, carbon steel?

No specific crimping pressure or fixed crimping cycle is stated for DKR hydraulic end, type ZBW110, carbon steel. The fitting is designed to be crimped into hydraulic and industrial hoses using a crimping sleeve appropriate for the hose type, so the correct crimp parameters depend on the hose construction, sleeve dimensions and the crimping machine used. Recommended approach: - Use the hose manufacturer's specified crimping pressure and cycle for the exact hose and sleeve combination. - Select a crimping sleeve that matches the hose type and the ZBW110 fitting geometry. - Follow the crimping machine manufacturerâs settings for pressure, dwell time and die configuration for that hose/sleeve size. - Verify crimp quality by checking sleeve deformation, no gaps, correct crimp diameter and that the 60Â° sealing cone of the DKR fitting seats properly. - Perform pull-off and leakage tests per applicable standards or customer requirements after crimping. If you need exact pressure or cycle values, provide the hose model, sleeve dimensions and crimper model so precise crimp specifications can be determined.

Fitting hydraulic DKR, type ZBW110, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), with BSP female thread with a nut, 60° sealing cone (DKR). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW110-02-02	Fitting 1/8" BSP female, hose 1/8", 60° cone	3	-	In stock	Enquiry
TI-ZBW110-02-03	Fitting 1/8" BSP female, hose 3/16", 60° cone	5	-	In stock	Enquiry
TI-ZBW110-02-04	Fitting 1/8" BSP female, hose 1/4", 60° cone	6	-	In stock	Enquiry
TI-ZBW110-04-02	Fitting 1/4" BSP female, hose 1/8", 60° cone	6	-	In stock	Enquiry
TI-ZBW110-04-03	Fitting 1/4" BSP female, hose 3/16", 60° cone	5	-	In stock	Enquiry
TI-ZBW110-04-04	Fitting 1/4" BSP female, hose 1/4", 60° cone	6	-	In stock	Enquiry
TI-ZBW110-04-05	Fitting 1/4" BSP female, hose 5/16", 60° cone	8	-	In stock	Enquiry
TI-ZBW110-04-06	Fitting 1/4" BSP female, hose 3/8", 60° cone	10	-	In stock	Enquiry
TI-ZBW110-06-04	Fitting 3/8" BSP female, hose 1/4", 60° cone	6	-	In stock	Enquiry
TI-ZBW110-06-05	Fitting 3/8" BSP female, hose 5/16", 60° cone	8	-	In stock	Enquiry
TI-ZBW110-06-06	Fitting 3/8" BSP female, hose 3/8", 60° cone	10	-	In stock	Enquiry
TI-ZBW110-06-08	Fitting 3/8" BSP female, hose 1/2", 60° cone	12	-	In stock	Enquiry
TI-ZBW110-08-04	Fitting 1/2" BSP female, hose 1/4", 60° cone	6	-	In stock	Enquiry
TI-ZBW110-08-05	Fitting 1/2" BSP female, hose 5/16", 60° cone	8	-	In stock	Enquiry
TI-ZBW110-08-06	Fitting 1/2" BSP female, hose 3/8", 60° cone	10	-	In stock	Enquiry
TI-ZBW110-08-08	Fitting 1/2" BSP female, hose 1/2", 60° cone	12	-	In stock	Enquiry
TI-ZBW110-08-10	Fitting 1/2" BSP female, hose 5/8", 60° cone	16	-	In stock	Enquiry
TI-ZBW110-08-12	Fitting 1/2" BSP female, hose 3/4",60° cone	20	-	In stock	Enquiry
TI-ZBW110-10-08	Fitting 5/8" BSP female, hose 1/2",60° cone	12	-	In stock	Enquiry
TI-ZBW110-10-10	Fitting 5/8" BSP female, hose 5/8", 60° cone	16	-	In stock	Enquiry
TI-ZBW110-10-12	Fitting 5/8" BSP female, hose 3/4",60° cone	20	-	In stock	Enquiry
TI-ZBW110-12-06	Fitting 3/4" BSP female, hose 3/8", 60° cone	10	-	In stock	Enquiry
TI-ZBW110-12-08	Fitting 3/4" BSP female, hose 1/2",60° cone	12	-	In stock	Enquiry
TI-ZBW110-12-10	Fitting 3/4" BSP female, hose 5/8", 60° cone	16	-	In stock	Enquiry
TI-ZBW110-12-12	Fitting 3/4" BSP female, hose 3/4", 60° cone	20	-	In stock	Enquiry
TI-ZBW110-12-16	Fitting 3/4" BSP female, hose 1", 60° cone	25	-	In stock	Enquiry
TI-ZBW110-16-10	Fitting 1" BSP female, hose 5/8", 60° cone	16	-	In stock	Enquiry
TI-ZBW110-16-12	Fitting 1" BSP female, hose 3/4", 60° cone	20	-	In stock	Enquiry
TI-ZBW110-16-16	Fitting 1" BSP female, hose 1", 60° cone	25	-	In stock	Enquiry
TI-ZBW110-20-16	Fitting 1.1/4" BSP female, hose 1", 60° cone	25	-	In stock	Enquiry
TI-ZBW110-20-20	Fitting 1.1/4" BSP female, hose 1.1/4", 60° cone	32	-	In stock	Enquiry
TI-ZBW110-20-24	Fitting 1.1/4" BSP female, hose 1.1/2", 60° cone	38	-	In stock	Enquiry
TI-ZBW110-24-20	Fitting 1.1/2" BSP female, hose 1.1/4" 60° cone	32	-	In stock	Enquiry
TI-ZBW110-24-24	Fitting 1.1/2" BSP female, hose 1.1/2", 60° cone	38	-	In stock	Enquiry
TI-ZBW110-32-24	Fitting 2" BSP female, hose 1.1/2",60° cone	38	-	In stock	Enquiry
TI-ZBW110-32-32	Fitting 2" BSP female, hose 2", 60° cone	50	-	In stock	Enquiry
TI-ZBW110-40-32	Fitting 2.1/2" BSP female, hose 2", 60° cone	50	-	In stock	Enquiry
TI-ZBW110-40-40	Fitting 2.1/2" BSP female, hose 2.1/2", 60° cone	50	-	In stock	Enquiry
TI-ZBW110-48-48	Fitting 3" BSP female, hose 3", 60° cone	75	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic fitting (type Z – with an ordinary hydraulic “tail” for the hose), with BSP female thread with a nut, 60° sealing cone (DKR). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.