Does the DKJ 90Â° hydraulic end, type ZJW210, AISI 316 steel (PH) require specific crimping sleeve dimensions or standards for secure installation?

Yes . the DKJ 90Â° hydraulic end, type ZJW210, AISI 316 steel (PH) requires a crimping sleeve matched to the hose type and marked for PH (stainless/316) use. Use a sleeve whose internal profile and diameter correspond to the hose construction and the ZJW210 tail geometry, and that is specifically designated with the â-PHâ suffix to ensure compatibility with AISI 316 fittings. Follow the hose manufacturerâs recommended sleeve dimensions, crimping depth, and crimp diameter for the specific hose and sleeve combination. Also use a crimping die set approved for the sleeve/hose system and apply the specified crimping force and procedure to achieve a uniform, leak-free 74Â° cone seal. Finally, verify the assembly by pressure testing per the hose and fitting manufacturerâs standards.

Can DKJ 90Â° hydraulic end, type ZJW210, AISI 316 steel (PH) be crimped using general-purpose sleeves or are hose-specific -PH sleeves mandatory?

You must use hose-specific -PH sleeves. DKJ 90Â° hydraulic end, type ZJW210, AISI 316 steel (PH) Format is designed to be crimped with sleeves marked â-PHâ that match the hose construction; general-purpose sleeves are not acceptable because they may not provide correct crimp geometry, sealing pressure on the 74Â° cone, or mechanical retention for the specific hydraulic/industrial hose. Using the specified -PH sleeves ensures proper fit, seal and safety.

Are there torque or installation torque specifications for DKJ 90Â° hydraulic end, type ZJW210, AISI 316 steel (PH)?

There are no specific torque values provided for DKJ 90Â° hydraulic end, type ZJW210, AISI 316 steel (PH) in the given description. This fitting is a crimp-type hydraulic end (type Z, internal UNF thread, nut, 74Â° cone sealing) designed to be assembled by crimping with a sleeve marked â-PHâ matched to the hose type. Proper installation requires using the correct crimping sleeve, a crimping machine calibrated to the hose/sleeve specification, and following hose and sleeve manufacturer crimp dimensions and pressures rather than applying a thread torque. If you must tighten the nut to engage the 74Â° DKJ cone during assembly on a test bench or temporary connection, follow these practical precautions: - Use manufacturer or hose-sleeve datasheets for recommended crimp dimensions and crimping force; those are the controlling installation parameters. - For the nut/UNF thread, use a small controlled torque only to seat the cone and prevent leakage during fitting; do not rely on thread torque to retain the crimpâcrimping secures the assembly. - Use suitable thread lubricant if specified by the manufacturer and avoid over-torquing stainless fittings to prevent gallingâuse anti-seize for AISI 316 where compatible. - If specific torque guidance is required, contact the fitting or hose/sleeve manufacturer or supplier with the exact hose, sleeve, and crimper model to obtain validated torque or assembly procedures. In summary: DKJ 90Â° hydraulic end, type ZJW210, AISI 316 steel (PH) has no stated installation torque in the provided description; correct assembly depends on using the proper crimp sleeve and crimping specifications from the hose/sleeve manufacturer and avoiding over-torquing the stainless nut.

DKJ 90° hydraulic end, type ZJW210, AISI 316 steel (PH)

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	10

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters “-PH” at the end of the index). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZJW210-07-03-SS-PH	End. JIC 90° G 7/16", hose 5/16", cone 74°, AISI 316	5	-	In stock	Enquiry
TI-ZJW210-07-04-SS-PH	End. JIC 90° G 7/16", hose 1/4", cone 74°, AISI 316	6	-	In stock	Enquiry
TI-ZJW210-08-03-SS-PH	End. JIC 90° G 1/2", hose 5/16", cone 74°, AISI 316	5	-	In stock	Enquiry
TI-ZJW210-08-04-SS-PH	End. JIC 90° G 1/2", hose 1/4", cone 74°, AISI 316	6	-	In stock	Enquiry
TI-ZJW210-08-05-SS-PH	End. JIC 90° G 1/2", hose 5/16", cone 74°, AISI 316	8	-	In stock	Enquiry
TI-ZJW210-09-03-SS-PH	End. JIC 90° G 9/16", hose 3/16", cone 74°, AISI 316	5	-	In stock	Enquiry
TI-ZJW210-09-04-SS-PH	End. JIC 90° G 9/16", hose 1/4", cone 74°, AISI 316	6	-	In stock	Enquiry
TI-ZJW210-09-05-SS-PH	End. JIC 90° G 9/16", hose 5/16", cone 74°, AISI 316	8	-	In stock	Enquiry
TI-ZJW210-09-06-SS-PH	End. JIC 90° G 9/16", hose 3/8", cone 74°, AISI 316	10	-	In stock	Enquiry
TI-ZJW210-12-06-SS-PH	End. JIC 90° G 3/4", hose 3/8", cone 74°, AISI 316	10	-	In stock	Enquiry
TI-ZJW210-12-08-SS-PH	End. JIC 90° G 3/4", hose 1/2", cone 74°, AISI 316	12	-	In stock	Enquiry
TI-ZJW210-14-06-SS-PH	End. JIC 90° G 7/8", hose 3/8", cone 74°, AISI 316	10	-	In stock	Enquiry
TI-ZJW210-14-08-SS-PH	End. JIC 90° G 7/8", hose 1/2", cone 74°, AISI 316	12	-	In stock	Enquiry
TI-ZJW210-14-10-SS-PH	End. JIC 90° G 7/8", hose 5/8", cone 74°, AISI 316	16	-	In stock	Enquiry
TI-ZJW210-17-08-SS-PH	End. JIC 90° G1/16", hose 1/2", cone 74°, AISI 316	12	-	In stock	Enquiry
TI-ZJW210-17-10-SS-PH	End. JIC 90° G1/16", hose 5/8", cone 74°, AISI 316	16	-	In stock	Enquiry
TI-ZJW210-17-12-SS-PH	End. JIC 90° G1/16", hose 3/4", cone 74°, AISI 316	20	-	In stock	Enquiry
TI-ZJW210-21-12-SS-PH	End. JIC 90° G1.5/16", hose 3/4", cone 74°, AISI 316	20	-	In stock	Enquiry
TI-ZJW210-21-16-SS-PH	End. JIC 90° G1.5/16", hose 1", cone 74°, AISI 316	25	-	In stock	Enquiry
TI-ZJW210-26-16-SS-PH	End. JIC 90° G1.5/8", hose 1", cone 74°, AISI 316	25	-	In stock	Enquiry
TI-ZJW210-26-20-SS-PH	End. JIC 90° G1.5/8", hose 1.1/4", cone 74°, AISI 316	32	-	In stock	Enquiry
TI-ZJW210-30-20-SS-PH	End. JIC 90° G1.7/8", hose 1.1/4", cone 74°, AISI 316	32	-	In stock	Enquiry
TI-ZJW210-30-24-SS-PH	End. JIC 90° G1.7/8", hose 1.1/2", cone 74°, AISI 316	38	-	In stock	Enquiry
TI-ZJW210-40-24-SS-PH	End. JIC 90° G 2.1/2", hose 1.1/2", cone 74°, AISI 316	38	-	In stock	Enquiry
TI-ZJW210-40-32-SS-PH	End. JIC 90° G 2.1/2", hose 2", cone 74°, AISI 316	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters “-PH” at the end of the index). Material: AISI 316 steel.