Is the DKOL 90Â° hydraulic end, type ZMW221, light series, AISI 316L steel compatible with standard crimping sleeves for my hose type?

Yes . the DKOL 90Â° hydraulic end, type ZMW221, light series, AISI 316L steel is compatible with standard crimping sleeves provided the sleeve is specified for your hose type. The product description explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Ensure the sleeve matches your hoseâs diameter, reinforcement and material specifications, and that the crimp profile matches the light-series fitting geometry. Also verify crimping machine settings (pressure, die size) recommended by the hose and sleeve manufacturers to achieve a proper, leak-free crimp.

Can the DKOL 90Â° hydraulic end, type ZMW221, light series, AISI 316L steel be used with stainless-steel crimping sleeves for marine applications?

Yes. The DKOL 90Â° hydraulic end, type ZMW221, light series, AISI 316L steel is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Its AISI 316L stainless construction is corrosion-resistant and appropriate for marine environments, and the fitting features an internal metric thread, nut, and Oâring sealing on a 24Â° cone (DKOL), ensuring reliable sealing when properly assembled with a compatible stainlessâsteel crimping sleeve sized for the hose. Ensure the sleeve material, hose specifications, and crimping procedure meet marine standards and manufacturer torque/crimp profiles for safe, longâterm use.

Does the DKOL 90Â° hydraulic end, type ZMW221, light series, AISI 316L steel require a specific crimping pressure or die profile?

DKOL 90Â° hydraulic end, type ZMW221, light series, AISI 316L steel does not specify a single universal crimping pressure or die profile in the provided description. It is designed to be crimped with a crimping sleeve appropriate for the specific hose type, so required crimp parameters depend on the hose construction, sleeve geometry and the crimping equipment used. Practical guidance: - Use the crimping pressure (force) and die profile recommended by the hose manufacturer for the exact hose model and sleeve material. Those recommendations account for hose diameter, reinforcement type (textile, single-wire, or multi-wire braid/spiral) and sleeve dimensions. - Ensure the crimping sleeve matches the OEM sleeve design intended for this fitting (length, wall thickness, and internal profile). Incorrect sleeve selection changes needed crimp force and may compromise seal and mechanical retention. - Verify the crimped O-ring seal seating on the 24Â° cone (DKOL) and check that nut engagement and thread alignment are correct after crimping. - When using AISI 316L components, confirm the sleeve and tooling are compatible with stainless steel to avoid galling or deformation; some installers reduce crimp speed or use lubrication/protective coatings on tooling for stainless fittings. - Perform pull-off, pressure and leakage tests per applicable hydraulic hose standards (e.g., ISO 6805, SAE J517/J516 or manufacturer specifications) after crimping. If you need exact crimp force and die profile, provide the hose make/model and sleeve specification or consult the hose/sleeve manufacturer or the crimping machine supplier for validated crimp charts for that hose-ferrule-fittings combination.

DKOL 90° hydraulic end, type ZMW221, light series, AISI 316L steel

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	10, 2

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), 90° angled, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMW221-12-04-SS	End fitting 90° G1/2 M12x1.5, hose 1/4", 24°, o-ring, lightweight, AISI 316L	6	-	In stock	Enquiry
TI-ZMW221-14-04-SS	End. 90° G1/2 M14x1.5, hose 1/4", 24°, o-ring, lightweight, AISI 316L	6	-	In stock	Enquiry
TI-ZMW221-16-04-SS	End fitting 90° G1/2 M16x1.5, hose 1/4", 24°, o-ring, lightweight, AISI 316L	6	-	In stock	Enquiry
TI-ZMW221-16-05-SS	End fitting 90° G1/2 M16x1.5, hose 5/16", 24°, o-ring, lightweight, AISI 316L	8	-	In stock	Enquiry
TI-ZMW221-16-06-SS	End. 90° G1/2 M16x1.5, hose 3/8", 24°, o-ring, lightweight, AISI 316L	10	-	In stock	Enquiry
TI-ZMW221-18-05-SS	End fitting 90° G1/2 M18x1.5, hose 5/16", 24°, o-ring, lightweight, AISI 316L	8	-	In stock	Enquiry
TI-ZMW221-18-06-SS	End fitting 90° G1/2 M18x1.5, hose 3/8", 24°, o-ring, lightweight, AISI 316L	10	-	In stock	Enquiry
TI-ZMW221-22-08-SS	End. 90° G1/2" M22x1.5, hose 1/2", 24°, o-ring, lightweight, AISI 316L	12	-	In stock	Enquiry
TI-ZMW221-26-10-SS	End fitting 90° G thread M26x1.5, hose 5/8", 24°, o-ring, lightweight, AISI 316L	16	-	In stock	Enquiry
TI-ZMW221-30-12-SS	End. 90° GW M30x2, hose 3/4", 24°, o-ring, lightweight, AISI 316L	20	-	In stock	Enquiry
TI-ZMW221-36-16-SS	End. 90° G1 1/2" M36x2, hose 1", 24°, o-ring, lightweight, AISI 316L	25	-	In stock	Enquiry
TI-ZMW221-45-20-SS	End fitting 90° G1/2 M45x2, hose 1.1/4", 24°, o-ring, lightweight, AISI 316L	32	-	In stock	Enquiry
TI-ZMW221-52-24-SS	End fitting 90° G1/2" M52x2, hose 1.1/2", 24°, o-ring, lightweight, AISI 316L	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), 90° angled, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.