Is the Hydraulic quick coupling with valve, plug with GW BSP, TEMA STANDARD compatible with both internal BSP and NPT threads under high-pressure hydraulic oil service?

Yes . the Hydraulic quick coupling with valve, plug with GW BSP, TEMA STANDARD is compatible with both internal BSP and NPT threads for highâpressure hydraulic oil service, with the following conditions: - Thread compatibility: The product is offered with internal BSP and internal NPT thread versions (TEMA STANDARD plug, NORDIC RANGE), so you must select the matching thread type to mate with the corresponding counterpart; BSP and NPT are not directly interchangeable without an appropriate adapter or thread conversion. - Pressure and duty: Designed for heavyâduty hydraulic oil service up to 450 bar (depending on diameter) with a 4:1 safety factor . suitable for highâpressure hydraulic systems when installed within the specified size/pressure rating. - Materials and environment: Chromeâplated brass (â¤1") and galvanized steel (>1") constructions are intended for hydraulic oils; choose material appropriate for your system conditions (corrosion, mechanical load). - Sealing and temperature: Seals available in Viton or NBR; select Viton for higher temperatures/chemical compatibility (NBR: â30Â°C to +100Â°C; Viton: â15Â°C to +200Â°C). - Hydraulic performance: Flow ratings provided for a 3 bar pressure drop . ensure this meets system flow requirements. Conclusion: The coupling itself supports internal BSP and internal NPT thread options and is suitable for highâpressure hydraulic oil service when you use the correct thread version, material, and seal for your specific pressure, temperature, and compatibility needs.

Can the Hydraulic quick coupling with valve, plug with GW BSP, TEMA STANDARD be used with both NPT and BSP threads in steam and chemical services?

Yes. The Hydraulic quick coupling with valve, plug with GW BSP, TEMA STANDARD Format (Nordic range) is designed with internal BSP and NPT threads and specified for hydraulic power, industrial water, steam, fuels, oils, gases and chemicals, so it can be used with both NPT and BSP threaded systems. Material selection (chromeâplated brass â¤1", galvanized steel >1"), sealing options (Viton or NBR), temperature and pressure ratings (up to 450 bar depending on size; â30Â°C to +100Â°C for NBR, â15Â°C to +200Â°C for Viton) and a 4:1 safety factor support use in steam and many chemical services. Verify chemical compatibility with chosen sealing material and confirm pressure/temperature limits for your specific media and size before use.

Can the Hydraulic quick coupling with valve, plug with GW BSP, TEMA STANDARD be used with internal BSP and NPT threads for fuel and oil applications?

Yes. the Hydraulic quick coupling with valve, plug with GW BSP, TEMA STANDARD can be used with internal BSP and NPT threads for fuel and oil applications, with the following considerations: - Compatibility: The product is specified with internal BSP and NPT thread options, so thread type compatibility is supported. Ensure mating part thread standard matches the chosen coupling thread (BSP or NPT). - Media suitability: The TEMA STANDARD plug is rated for hydraulic oil and explicitly lists fuels and oils among intended industrial applications, so it is suitable for fuel and oil service. - Materials: Up to 1" chromeâplated brass; above 1" galvanized steel. Choose material appropriate for the specific fuel/oil and environment (galvanized steel better for larger sizes and heavyâduty use; brass common for corrosion resistance but check compatibility with specific fuels). - Seals and temperature: Available with Viton or NBR seals. For fuel applications and higher temperatures use Viton (â15Â°C to +200Â°C) for broader chemical and temperature resistance. NBR acceptable for many oils (â30Â°C to +100Â°C) but less resistant to some fuels and high temps. - Pressure and safety: Working pressure up to 450 bar (size dependent) and safety factor 4:1. confirm the coupling size meets your systemâs maximum operating pressure and transient conditions. - Performance: Flow rated for a 3 bar pressure dropâverify flow capacity meets system requirements. - Installation notes: Ensure proper thread sealing method compatible with thread type and material (sealant/tape appropriate for fuel service), and verify installation torque and leak testing after assembly. Conclusion: Suitable for fuel and oil applications when you select the correct thread type (BSP or NPT), appropriate material and seal (Viton recommended for fuels/high temp), and confirm pressure/flow ratings match your system.

Hydraulic quick coupling with valve, plug with GW BSP, TEMA STANDARD

All products, Hydraulic quick couplings/

Additional information

Material	B – brass (bronze)

TEMA STANDARD quick coupling plug (NORDIC RANGE) with shut-off valve and internal BSP and NPT thread. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1″, galvanized steel above 1″. Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). Flow has been provided for a pressure drop of 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TA-H-10020	1" BSP plug, nitrile seal, with valve	-	250	In stock	Enquiry
TA-H-10020V	1" BSP plug, Viton seal, with valve	-	250	In stock	Enquiry
TA-H-15020	Plug with GW 1.1/2" BSP, nitrile seal, with valve	-	200	In stock	Enquiry
TA-H-15020V	Plug with GW 1.1/2" BSP, Viton seal, with valve	-	200	In stock	Enquiry
TA-H-20020	2" BSP plug, nitrile seal, with valve	-	180	In stock	Enquiry
TA-H-20020V	2" BSP plug, Viton seal, with valve	-	180	In stock	Enquiry
TA-H-2320	Plug with 1/8" BSP thread, nitrile seal, with valve	-	200	In stock	Enquiry
TA-H-2320V	Plug with 1/8" BSP thread, Viton seal, with valve	-	200	In stock	Enquiry
TA-H-2520	Plug with 1/4" BSP thread, nitrile seal, with valve	-	450	In stock	Enquiry
TA-H-2520NPT	1/4" NPT plug, nitrile seal, with valve	-	450	In stock	Enquiry
TA-H-2520V	Plug with 1/4" BSP thread, Viton seal, with valve	-	450	In stock	Enquiry
TA-H-3820	Plug with 3/8" BSP thread, nitrile seal, with valve	-	450	In stock	Enquiry
TA-H-3820NPT	3/8" NPT plug, nitrile seal, with valve	-	450	In stock	Enquiry
TA-H-3820V	3/8" BSP plug, Viton seal, with valve	-	450	In stock	Enquiry
TA-H-5020	Plug with 1/2" BSP thread, nitrile seal, with valve	-	300	In stock	Enquiry
TA-H-5020NPT	Plug with 1/2" NPT thread, nitrile seal, with valve	-	300	In stock	Enquiry
TA-H-5020V	Plug with 1/2" BSP thread, Viton seal, with valve	-	300	In stock	Enquiry
TA-H-7520	Plug with GW 3/4" BSP, nitrile seal, with valve	-	280	In stock	Enquiry
TA-H-7520NPT	3/4" NPT plug, nitrile seal, with valve	-	280	In stock	Enquiry
TA-H-7520V	Plug with GW 3/4" BSP, Viton seal.	-	280	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

TEMA STANDARD quick coupling plug (NORDIC RANGE) with shut-off valve and internal BSP and NPT thread. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1″, galvanized steel above 1″. Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). Flow has been provided for a pressure drop of 3 bar.