Can Hydraulic quick coupling without valve, plug with GW BSP, stainless steel, TEMA STANDARD be used for pulsating pressure applications if maximum working pressure is reduced by 50%?

Yes . Hydraulic quick coupling without valve, plug with GW BSP, stainless steel, TEMA STANDARD can be used for pulsating pressure applications if you reduce the maximum working pressure by 50%. The product specification explicitly states that for pulsating pressure the maximum working pressure should be halved. With nominal working pressure up to 300 bar (depending on diameter), halving provides an allowable pulsating working pressure up to 150 bar (subject to the actual coupling diameter rating). Material (AISI 316), safety factor 4:1, and operating temperature range (-30Â°C to +200Â°C) support heavy-duty and varied media use, but ensure the reduced pressure still meets system demands. Also verify dynamic fatigue, cycle frequency, and system-specific factors with the manufacturer for critical or high-cycle pulsating applications.

Can Hydraulic quick coupling without valve, plug with GW BSP, stainless steel, TEMA STANDARD be used for pulsating pressure if WP is halved?

Yes - Hydraulic quick coupling without valve, plug with GW BSP, stainless steel, TEMA STANDARD can be used for pulsating pressure provided the rated working pressure (WP) is reduced by 50%. The product specification explicitly states: âFor pulsating pressure, the maximum working pressure should be reduced by 50%.â With AISI 316 construction, safety factor 4:1 and WP up to 300 bar (dependent on size), halving WP for pulsation ensures adherence to manufacturer guidance. Verify the specific diameterâs nominal WP, apply the 50% reduction, and confirm system pulsation amplitude/frequency and temperature/medium compatibility (â30Â°C to +200Â°C, hydraulic oil, water, steam, fuels, gases, chemicals) for safe operation.

Is Hydraulic quick coupling without valve, plug with GW BSP, stainless steel, TEMA STANDARD suitable for pulsating-pressure use with WP reduced by 50%?

Hydraulic quick coupling without valve, plug with GW BSP, stainless steel, TEMA STANDARD Format Yes. this plug is suitable for pulsating-pressure use provided the working pressure (WP) is reduced by 50% as stated. Rationale: - The product description explicitly instructs that for pulsating pressure the maximum working pressure should be reduced by 50%. - Base WP is specified up to 300 bar (depending on diameter); after the 50% reduction the allowable WP under pulsating conditions becomes up to 150 bar (diameter-dependent). - Construction and materials (AISI 316 stainless steel, designed for heavy-duty conditions) and a safety factor of 4:1 support robust use, subject to reduced WP. - Ensure the selected diameterâs nominal WP, the systemâs actual pulsation amplitude/frequency, fluid compatibility (hydraulic oil, water, steam, fuels, gases, chemicals are listed), and operating temperature (-30Â°C to +200Â°C) all match your application. - Verify installation torque, thread match (internal BSP), and any system-specific fatigue or vibration considerations with the manufacturer or technical datasheet if operating near the reduced WP limit.

A hydraulic quick coupling without a valve, plug with female thread BSP, of stainless steel, TEMA STANDARD

All products, Hydraulic quick couplings/

Additional information

Material	SS – stainless steel

Plug without a valve quick coupling TEMA STANDARD (NORDIC RANGE) with a BSP female thread. Intended for heavy-duty operating conditions. For pulsating pressure, the maximum working pressure should be reduced by 50%. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: stainless steel AISI 316. Working pressure: up to 300 bar (depending on the diameter). Safety factor 4:1. Operating temperature: from -30°C to +200°C. The flow is given for a pressure drop of 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TA-H-10020RUV	Plug SS with 1" BSP female, without valve	-	250	In stock	Enquiry
TA-H-15020RUV	Plug SS with 1.1/2" BSP female, without valve	-	150	In stock	Enquiry
TA-H-20020RUV	Plug SS with 2" BSP female, without valve	-	120	In stock	Enquiry
TA-H-2320RUV	Plug SS with 1/8" BSP female without valve	-	200	In stock	Enquiry
TA-H-2520RUV	Plug SS with 1/4" BSP female, without valve	-	250	In stock	Enquiry
TA-H-3820RFUV	Plug SS with 3/8" BSP female, without valve	-	300	In stock	Enquiry
TA-H-3820RUV	Plug SS with 3/8" BSP female, without valve	-	300	In stock	Enquiry
TA-H-5020RUV	Plug SS with 1/2" BSP female, without valve	-	300	In stock	Enquiry
TA-H-7520RUV	Plug SS with 3/4" BSP female, without valve	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug without a valve quick coupling TEMA STANDARD (NORDIC RANGE) with a BSP female thread. Intended for heavy-duty operating conditions. For pulsating pressure, the maximum working pressure should be reduced by 50%. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: stainless steel AISI 316. Working pressure: up to 300 bar (depending on the diameter). Safety factor 4:1. Operating temperature: from -30°C to +200°C. The flow is given for a pressure drop of 3 bar.