Is the Hydrolysis and microorganism resistant suction hose P2PUAE FDA-compliant and suitable for transferring food-grade oils and light bulk materials across -40Â°C to +100Â°C?

Hydrolysis and microorganism resistant suction hose P2PUAE Format: Yes. Based on the provided description, the hose is FDA-compliant and meets European Directives, and it is made of transparent polyetherâpolyurethane that is resistant to microorganisms and hydrolysis. Its specified operating temperature range (â40Â°C to +100Â°C) covers the temperatures you stated. The hose is described for discharge of oil vapors, dust, and light bulk materials, and its construction (steel wire spiral reinforcement, 0.4 mm wall thickness between spirals) supports suction and transfer tasks. Caveats: confirm specific FDA food-contact certification level and any application-specific approvals (e.g., repeated direct contact with particular food-grade oils, solvents, or fatty substances, or pasteurization/aseptic processes), as well as maximum vacuum/pressure and abrasion/chemical compatibility for your exact use.

Does Hydrolysis and microorganism resistant suction hose P2PUAE maintain flexibility and performance for oil vapors and dust discharge?

Yes. Hydrolysis and microorganism resistant suction hose P2PUAE maintains flexibility and performance for oil vapors and dust discharge. Its lightweight, transparent polyetherâpolyurethane construction offers excellent flexibility across a wide temperature range (â40Â°C to +100Â°C). The hose is specifically designed for discharge of oil vapors, dust, and light bulk materials, and is resistant to microorganisms and hydrolysis. Reinforced with a steel wire spiral and a wall thickness of 0.4 mm between spirals, it provides durable structural integrity while complying with FDA requirements and relevant European directives.

Can Hydrolysis and microorganism resistant suction hose P2PUAE be sterilized without damaging its polyetherâpolyurethane structure?

Hydrolysis and microorganism resistant suction hose P2PUAE Format can generally be sterilized, but with important limitations due to its transparent polyetherâpolyurethane construction. Key considerations: - Material tolerance: Polyetherâbased polyurethanes have good hydrolysis and microbial resistance and withstand temperatures up to +100Â°C. They are not suitable for highâtemperature sterilization methods (e.g., autoclaving at 121â134Â°C) because those temperatures exceed the hoseâs maximum rated temperature and can cause softening, deformation, loss of mechanical properties, or damage to the polyurethane matrix. - Chemical sterilants: Lowâtemperature chemical sterilization (e.g., ethylene oxide, hydrogen peroxide vapor, peracetic acid) is more compatible with polyetherâpolyurethane. These methods operate below the hoseâs temperature limit and, when used per manufacturer/sterilant guidelines, are unlikely to hydrolyze or attack the polyurethane. However, compatibility with the steel wire spiral and any residues must be verified. - Liquid disinfectants: Common disinfectants (alcohols, quaternary ammonium compounds, diluted chlorine solutions) are often safe for short exposures, but prolonged contact with strong oxidizers (highâconcentration hypochlorite, concentrated peroxide) can degrade polyurethane or corrode the reinforcement. Rinse thoroughly after chemical disinfection. - Physical methods: Dry heat sterilization at temperatures required for reliable sterility exceeds the hoseâs Tmax and is not recommended. UV sterilization may reduce surface bioburden but wonât sterilize internal lumen reliably. - Mechanical factors: Wall thickness between spirals is only 0.4 mm; aggressive cleaning/sterilization cycles, high shear, or repeated solvent exposure can thin, embrittle, or cause microcracking over time. - Regulatory/validation: The hose is FDAâcompliant and resistant to microorganisms/hydrolysis, supporting use in hygienic applications, but any sterilization protocol should be validated for efficacy and material integrity (e.g., tensile testing, visual inspection, leak testing) after intended cycles. Recommendation: Avoid autoclaving and highâtemperature dry heat. Prefer validated lowâtemperature methods (ethylene oxide or vaporized hydrogen peroxide) or appropriate chemical disinfectants with proper rinsing. Perform compatibility testing and periodic inspection to ensure the polyetherâpolyurethane structure and steel spiral are not damaged.

Hydrolysis and microorganism resistant suction hose P2PUAE

All products, Ducting and ventilation hoses/

Additional information

Material	PU – polyurethane
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	10

Lightweight and with excellent flexibility, the hose is designed for the discharge of oil vapors, dust, and light bulk materials. Resistant to microorganisms and hydrolysis. Compliant with FDA requirements and European Directives. Hose material: transparent polyether-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: from -40°C to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
SC-P2PUAE-150	Hose P 2 PU AE 150 mm	150	0.1	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight and with excellent flexibility, the hose is designed for the discharge of oil vapors, dust, and light bulk materials. Resistant to microorganisms and hydrolysis. Compliant with FDA requirements and European Directives. Hose material: transparent polyether-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: from -40°C to +100°C.