Is the PA11 S40 inch polyamide pneumatic hose suitable for hydraulic and fuel applications up to +80Â°C and pressures between 19â28 bar?

No. The PA11 S40 inch polyamide pneumatic hose described is intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical installations and lists a working pressure range of 19â28 bar and an operating temperature range of â40Â°C to +80Â°C (for water-based media +70Â°C). However the specification you provided states the hose material is polyamide PA 12 (nylon), not PA11. If your actual hose is PA11 S40, you must confirm its material and manufacturer data sheet. If the hose truly matches the provided spec (PA12 nylon, 19â28 bar, â40Â°C to +80Â°C), then it is suitable for hydraulic and fuel applications up to +80Â°C within the stated pressure range, but observe the +70Â°C limit for water-based media and verify compatibility with specific hydraulic fluids and fuels. Also ensure the diameter/wall thickness variant meets the required working pressure and that fittings and standards (SAE J844 where applicable) are respected.

Can the PA11 S40 inch polyamide pneumatic hose be used for chemical, lubrication and oil systems at -40Â°C to +80Â°C and pressures up to 28 bar?

Yes. The PA11 S40 inch polyamide pneumatic hose is designed for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations, with operating temperatures from â40Â°C to +80Â°C (note: for water-based media max +70Â°C) and working pressures depending on size/wall from 19 to 28 bar. Ensure the specific diameter/wall option selected supports the required pressure (up to 28 bar) and verify chemical compatibility for your exact fluids.

Does the PA11 S40 inch polyamide pneumatic hose meet SAE J844 for diameters 1/8"â5/16"?

Yes. The PA11 S40 inch polyamide pneumatic hose meets SAE J844 for diameters 1/8"â5/16". The product description explicitly lists Standard: SAE J 844 (diameters from 1/8" to 5/16"), confirming compliance for those sizes. Additional specs: lightweight, flexible, calibrated outer diameter; polyamide PA 12 (nylon) construction; working pressure 19â28 bar depending on size and wall thickness; operating temperature â40Â°C to +80Â°C (to +70Â°C for water-based media).

PA11 S40 inch polyamide pneumatic hose

All products, Pneumatic hoses/

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	100

Lightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Available in colors: natural, black, blue, red, yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 19 bar to 28 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -40°C to +80°C (for water-based media +70°C). Standard: SAE J 844 (diameters from 1/8″ to 5/16″).

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
ZC-PA11-S40-02,5BK	Nylon hose PA11 S40 5/32" (3.96x2.3 mm), black	2	28
ZC-PA11-S40-02BK	Nylon hose PA11 S40 1/8" (3.17x2 mm), black	2	23
ZC-PA11-S40-03BK	Nylon hose PA11 S40 3/16" (4.76x3 mm), black	3	28
ZC-PA11-S40-04BK	Nylon hose PA11 S40 1/4" (6.35x4.3 mm), black	4	28
ZC-PA11-S40-05BK	Nylon hose PA11 S40 5/16" (7.93x5.9 mm), black	6	23
ZC-PA11-S40-06BK	Nylon hose PA11 S40 3/8" (9.52x6.98 mm), black	6	21
ZC-PA11-S40-08BK	Nylon hose PA11 S40 1/2" (12.7x9.53 mm), black	10	19

Lightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Available in colors: natural, black, blue, red, yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 19 bar to 28 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -40°C to +80°C (for water-based media +70°C). Standard: SAE J 844 (diameters from 1/8″ to 5/16″).