Is the ISO-A hydraulic quick connector plug with METRIC FITTING with valve, type PPV3 compatible with other manufacturers' ISO-A (euro) couplings?

Yes . the ISO-A hydraulic quick connector plug with METRIC FITTING with valve, type PPV3 is compatible with other manufacturersâ ISOâA (euro) couplings. It is manufactured to the ISOâA (euro) standard for hydraulic quick couplings (shutâoff valve, external metric thread) used in power hydraulics and agricultural machinery, and is described as interchangeable with ISOâA couplings from other makers. Ensure matching size, thread and pressure rating (up to 350 bar depending on size), and use compatible sealing material (NBR, â25Â°C to +100Â°C) for reliable operation.

Is the ISO-A hydraulic quick connector plug with METRIC FITTING with valve, type PPV3 suitable for use in agricultural hydraulic systems with hydraulic oil?

Yes. The ISO-A hydraulic quick connector plug with METRIC FITTING with valve, type PPV3 is suitable for use in agricultural hydraulic systems with hydraulic oil. It is explicitly designed for power hydraulics and agricultural machinery, uses galvanized steel construction, NBR seals compatible with typical hydraulic oils (operating â25Â°C to +100Â°C), and supports working pressures up to 350 bar (size-dependent) with a 4:1 safety factor. Ensure you select the correct size for your required pressure and flow and verify compatibility with any existing ISO-A/euro couplings in your system.

Can the ISO-A hydraulic quick connector plug with METRIC FITTING with valve, type PPV3 be used with biodegradable hydraulic oils?

Yes. in most cases the ISO-A hydraulic quick connector plug with METRIC FITTING with valve, type PPV3 can be used with biodegradable hydraulic oils, provided the oil is compatible with the materials specified. Key points: - Seals: The coupling uses NBR (nitrile) seals, rated for â25Â°C to +100Â°C. NBR is compatible with many biodegradable ester-based and synthetic hydraulic fluids, but not all biodegradable formulations. some aggressive synthetic esters (e.g., certain polyol esters or phosphate esters) and newer additive packages can cause swelling or hardening of NBR. - Body material: Galvanized steel is generally compatible with biodegradable oils and does not present a compatibility issue. - Operating conditions: The coupling is designed for power hydraulics up to 350 bar (size-dependent) and a wide temperature range; ensure the chosen biodegradable oilâs viscosity and temperature behavior remain within the couplingâs operational limits. - Recommendation: Check the specific biodegradable oil manufacturerâs compatibility data for NBR seals. If the oil is confirmed compatible with NBR, the ISO-A hydraulic quick connector plug with METRIC FITTING with valve, type PPV3 is suitable. If compatibility is uncertain or the oil is known to attack NBR, request the coupling with alternative seal materials (e.g., FKM/Viton, HNBR, or PU) before use.

ISO-A hydraulic quick-coupling plug with male thread metric with a valve, type PPV3

All products, Hydraulic quick couplings/

Additional information

Material	CS – steel (cast iron)

ISO-A hydraulic quick-coupling plug with a shut-off valve and a metric male thread. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called “euro couplings”. interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. Sealing: NBR (Operating temperature from -25°C to +100°C). Working pressure: up to 350 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given at Δp = 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DP-PPV3-0614303	Plug DN6 with M14x1.5 male (8L), seal NBR	-	350	In stock	Enquiry
DP-PPV3-1016303	Plug DN10 with M16x1.5 male (10L), seal NBR	-	300	In stock	Enquiry
DP-PPV3-1018403	Plug DN10 with M18x1.5 male (10S), seal NBR	-	300	In stock	Enquiry
DP-PPV3-1314303	Plug DN12 with M14x1.5 male (8L), seal NBR	-	250	In stock	Enquiry
DP-PPV3-1316303	Plug DN12 with M16x1.5 male (10L), seal NBR	-	250	In stock	Enquiry
DP-PPV3-1318303	Plug DN12 with M18x1.5 male (12L), seal NBR	-	250	In stock	Enquiry
DP-PPV3-1322303	Plug DN12 with M22x1.5 male (15L), seal NBR	-	250	In stock	Enquiry
DP-PPV3-1322403	Plug DN12 with M22x1.5 male (14S), seal NBR	-	250	In stock	Enquiry
DP-PPV3-1324403	Plug DN12 with M24x1.5 male (16S), seal NBR	-	250	In stock	Enquiry
DP-PPV3-2030303	Plug DN19 with M30x2 male (22L), sealNBR	-	250	In stock	Enquiry
DP-PPV3-2030403	Plug DN19 with M30x2 male (20S), sealNBR	-	250	In stock	Enquiry
DP-PPV3-2536303	Plug DN25 with M36x2 male (28L), seal NBR	-	200	In stock	Enquiry
DP-PPV3-2542403	Plug DN25 with M42x2 male (30S), seal NBR	-	200	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ISO-A hydraulic quick-coupling plug with a shut-off valve and a metric male thread. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called “euro couplings”. interchangeable with quick coupling ISO-A from other manufacturers. Material: galvanized steel. Sealing: NBR (Operating temperature from -25°C to +100°C). Working pressure: up to 350 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given at Δp = 3 bar.