Quick-connect plug for measurement SNAP-CHECK, manufactured in Sweden, designed for pressure measurement in hydraulic systems. The quick-connect sockets are connected by a hose to a pressure gauge, while the hardened steel quick-connect plugs are typically permanently installed in the hydraulic system and equipped with shut-off valves. Connection of the socket to the plug is possible under pressure up to 300 bar. The working pressure for the unplugged plug is 600 bar, and the minimum burst pressure is 2400 bar. The working pressure for the connected socket and plug is also 600 bar, while the minimum burst pressure is 1300 bar. The precise construction of the quick-connects ensures the tightness and reliability of the measurement points in the hydraulic system. The connection range for measurement plugs allows for easy configuration of the connection. Quick-connect plugs are supplied as standard with red plastic caps. Working pressure: 600 bar. Switching pressure: up to 300 bar. Body material: galvanized steel. Sealing: NBR. Operating temperature: from -30°C to +100°C.