Can the Pneumatic diverter valve mechanically operated tappet, 5/2, 70 series be mounted in any orientation without affecting performance or sealing?

Yes. The Pneumatic diverter valve mechanically operated tappet, 5/2, 70 series can be mounted in any orientation without affecting performance or sealing. The product description for this universal mechanical control distribution valve states it âcan be mounted in any position.â Its construction.aluminum body, nickelâplated aluminum slider and NBR seals.along with operating limits (up to 10 bar, â10Â°C to +60Â°C) supports reliable sealing and function regardless of mounting orientation. Ensure installations respect the specified pressure and temperature ranges and provide proper actuation clearance for the push rod.

Does the Pneumatic diverter valve mechanically operated tappet, 5/2, 70 series require specific mounting orientation for optimal sealing and function?

Pneumatic diverter valve mechanically operated tappet, 5/2, 70 series does not require a specific mounting orientation for optimal sealing and function. According to the product description, it is a universal mechanical control distribution valve operated by a push rod and "can be mounted in any position." Its construction-aluminum body, nickel-plated aluminum slider, NBR seals and plastic end cover-supports reliable operation up to 10 bar and within -10Â°C to +60Â°C regardless of orientation. Standard good practice: avoid excessive contamination, ensure push rod alignment and secure mounting to prevent mechanical stress, and allow access for maintenance.

Are there any installation clearances or support requirements for the Pneumatic diverter valve mechanically operated tappet, 5/2, 70 series?

Pneumatic diverter valve mechanically operated tappet, 5/2, 70 series. Installation clearances and support requirements The Pneumatic diverter valve mechanically operated tappet, 5/2, 70 series is compact and designed for flexible mounting. Based on the product description, general recommendations are: - Mounting position: Can be mounted in any position (no strict orientation required). Select the position that provides easy access to the push rod and connections for maintenance and operation. - Clearance for actuation: Leave sufficient clearance around the mechanical tappet/push rod so the actuator or manual interface can move freely without obstruction. Ensure the push rod travel is not impeded by nearby structures. - Port access: Provide clear access to all pneumatic ports (1, 2, 3, 4, 5) for tubing connection and inspection. Allow room for fittings and tubing bends to avoid stress on ports. - Support and fixation: Securely fix the valve body to a rigid surface or bracket to prevent movement or vibration during operation. Use appropriate fasteners for the aluminum body and the mounting method provided (e.g., through-holes or clamp). Rigid mounting reduces wear on internal components and avoids misalignment of the push rod. - Vibration and shock: Although aluminum construction is lightweight, avoid excessive vibration or mechanical shock. If installed in a high-vibration environment, add damping or vibration isolation and ensure mounting hardware is locked. - Environmental clearance: Maintain ambient conditions within the specified operating temperature range (â10Â°C to +60Â°C). Protect from direct exposure to contaminants, liquids, or corrosive atmospheres that could damage NBR seals or plastic end covers. - Pressure and flow considerations: Ensure piping and fittings are rated for working pressure up to 10 bar. Avoid excessive dead-end loads or forces on ports that could transmit stress to the valve body. - Sealing and maintenance access: Allow space for periodic inspection and replacement of seals (NBR) and to access the nickel-plated slider and end cover if service is needed. Following these practical clearances and support measures will help ensure reliable operation and longevity of the Pneumatic diverter valve mechanically operated tappet, 5/2, 70 series.

Pneumatic diverter valve mechanically operated tappet, 5/2, 70 series

All products, Pneumatic valves/

Additional information

Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-10

Universal mechanical control distribution valve, operated by a push rod, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 – five-way, two-position. Size: 1/8″. Material: valve body – aluminum, slider – nickel-plated aluminum, sealing – NBR, end cover – plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-7001000110	Valve series 70 MEV 25 TAS OO	-	10	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Universal mechanical control distribution valve, operated by a push rod, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 – five-way, two-position. Size: 1/8″. Material: valve body – aluminum, slider – nickel-plated aluminum, sealing – NBR, end cover – plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.