Can Clamp DIN 3015 standard, aluminum, type 100 be welded directly to stainless steel structures without additional treatment at temperatures up to +350Â°C?

Clamp DIN 3015 standard, aluminum, type 100 cannot be welded directly to stainless steel structures without additional treatment if reliable, durable service at temperatures up to +350Â°C is required. Rationale: - Clamp base is specified as carbon steel (used for welding). Welding carbon steel directly to stainless steel without proper procedures leads to dissimilar-metal issues: formation of brittle intermetallics, carbon migration, and corrosion risks at the joint. - Clamp body is aluminum; aluminum must never be welded to steel or stainless steel directly without special transitional materials or processes (e.g., explosion welding, bimetallic transition inserts, or brazing with appropriate fillers). Direct fusion welding of aluminum to stainless/steel is not feasible. - Operating temperature up to +350Â°C increases risk of galvanic corrosion and metallurgical degradation at dissimilar-metal joints; fasteners are galvanized steel (also a different metal), adding complexity. Recommended approaches: - Use the provided option to bolt the clamp (mechanical fastening) or mount on a rail designed for stainless steel structures. - If a welded connection is required, employ a qualified engineering solution: use a carbon-steel weld pad or adapter welded to the stainless structure by appropriate procedures (including filler selection, pre/post-heat, and corrosion mitigation), or use bimetallic transition pieces fabricated by approved methods. Consult TUBES INTERNATIONALÂ® and a certified welding engineer to specify compatible materials, welding technique, and corrosion protection for service to +350Â°C. Conclusion: Do not weld Clamp DIN 3015 standard, aluminum, type 100 directly to stainless steel without engineered transition or alternative mounting; use mechanical fastening or approved transition/joint design and consult TUBES INTERNATIONALÂ® and a welding specialist.

Can Clamp DIN 3015 standard, aluminum, type 100 be welded directly to carbon steel structures rated for +350Â°C without pre/post heat treatment?

Clamp DIN 3015 standard, aluminum, type 100: No - you must not weld the aluminum clamp base directly to carbon steel structures rated for +350Â°C. Aluminum and carbon steel are dissimilar metals with very different melting points and thermal expansion; direct welding is not feasible and would severely degrade aluminum. Additionally, welding near a clamp intended for service up to +350Â°C risks altering material properties and fastener integrity. Use the specified mounting method: weld the carbon steel base/component (base material) to the structure, then attach the aluminum clamp by bolting/fastening or by using the available extended plates/rails and recommended mounting hardware. Consult TUBES INTERNATIONALÂ®/manufacturer for approved welding/mounting procedures and any required pre/post-heat treatment for the steel structure.

Can Clamp DIN 3015 standard, aluminum, type 100 be used in marine saltwater environments without additional corrosion protection?

Clamp DIN 3015 standard, aluminum, type 100 is not recommended for long-term use in marine saltwater environments without additional corrosion protection. Reasons: - Base and fasteners: Although the clamp body is aluminum, the screw material is galvanized steel and the base is carbon steelâboth are highly susceptible to corrosion in saltwater and will rapidly deteriorate unless either replaced with marine-grade stainless steel (e.g., A4/316) or protected. - Galvanizing limits: Standard galvanization provides limited protection in aggressive chloride environments; coating breakdown and underfilm corrosion are common in seawater exposure. - Aluminum behavior: Aluminum resists atmospheric corrosion but can suffer pitting and galvanic corrosion when in electrical contact with carbon steel or other dissimilar metals in saline conditions. - Galvanic coupling: Mixed-metal assembly (aluminum vs. carbon steel/galvanized steel) in a conductive saline environment markedly increases corrosion risk unless electrically isolated or protected. - Service life and safety: Structural integrity and clamp performance (including screw threads and welds) can be compromised, affecting pipe support reliability. Recommendations for marine saltwater use: - Use corrosion-resistant alternatives: specify fasteners and base in A4/316 stainless steel or fully marine-grade materials. - Apply protective measures: robust marine coatings (epoxy/ polyurethane, specialized anti-corrosion coatings), cathodic protection, or isolation washers/gaskets to prevent galvanic contact. - Consider replacement parts: order extended plates/rails/screws in marine-grade materials from TUBES INTERNATIONALÂ® or consult them for a marine version. - Inspection and maintenance: implement frequent inspections and proactive maintenance if unprotected components are used. Conclusion: Do not use Clamp DIN 3015 standard, aluminum, type 100 in saltwater environments without additional corrosion protection or substitution of vulnerable steel parts with marine-grade materials.

Clamp DIN 3015 standard, aluminum, type 100

All products, Clamps for hydraulic pipes/

Additional information

Material	AL – aluminum

DIN 3015 standard clamp type 100 (without top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. For size group 0, there is one hexagon socket screw, and for size groups 1 to 6, there are two hexagon socket screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: aluminum. Screw material: galvanized steel. Base material: carbon steel. Operating temperature: up to +350°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-AL100-106	DIN3015 standard AL clamp for 6 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-108	DIN3015 standard AL clamp for 8 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-110	DIN3015 standard AL clamp for 10 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-112	DIN3015 standard clamp AL for 12 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-213,5	DIN3015 standard AL clamp for 13.5 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-214	DIN3015 standard AL clamp for 14 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-215	DIN3015 standard clamp AL for 15 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-216	DIN3015 standard AL clamp for 16 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-217,2	DIN3015 standard clamp AL for pipe 17.2 mm, without p. g.	-	-	In stock	Enquiry
TC-AL100-218	DIN3015 standard AL clamp for 18 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-319	DIN3015 standard AL clamp for 19 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-320	DIN3015 standard AL clamp for 20 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-321,3	DIN3015 standard AL clamp for 21.3 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-322	DIN3015 standard AL clamp for 22 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-325	DIN3015 standard clamp AL for 25 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-426,9	DIN3015 standard AL clamp for a 26.9 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-428	DIN3015 standard AL clamp for 28 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-430	DIN3015 standard AL clamp for 30 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-432	DIN3015 standard clamp AL for 32 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-532	DIN3015 standard AL clamp for 32 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-533,7	DIN3015 standard clamp AL for 33.7 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-535	DIN3015 standard clamp AL for 35 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-538	DIN3015 standard clamp AL for 38 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-540	DIN3015 standard clamp AL for 40 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-542	DIN3015 standard AL clamp for 42 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-545	DIN3015 standard AL clamp for 45 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-644,5	DIN3015 standard AL clamp for 44.5 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-648,3	DIN3015 standard clamp AL for pipe 48.3 mm, without p. g.	-	-	In stock	Enquiry
TC-AL100-650,8	DIN3015 standard clamp AL for pipe 50.8 mm, without p. g.	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DIN 3015 standard clamp type 100 (without top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. For size group 0, there is one hexagon socket screw, and for size groups 1 to 6, there are two hexagon socket screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: aluminum. Screw material: galvanized steel. Base material: carbon steel. Operating temperature: up to +350°C.