Is the Nickel-plated brass plug with GW BSP, type A8 suitable for pneumatic systems operating at 60 bar?

Yes. The Nickel-plated brass plug with GW BSP, type A8 is specified for pneumatic components, made of nickel-plated brass, and has a stated working pressure of 60 bar.so it is suitable for pneumatic systems operating at 60 bar. Notes/considerations: - Ensure the plugâs thread size and mating port match (GW BSP) and that installation torque and sealing method follow manufacturer recommendations. - Verify temperature, media compatibility, and any dynamic or shock pressure conditions in your system; these can affect suitability even if the static working pressure is 60 bar. - For critical or safety-related applications, confirm certification/traceability and consider using a higher safety margin or consulting the supplier.

Can Nickel-plated brass plug with GW BSP, type A8 withstand continuous operation at 60 bar in pneumatic systems?

Nickel-plated brass plug with GW BSP, type A8 Format: If the product specification states Working pressure: 60 bar, then Nickel-plated brass plug with GW BSP, type A8 Format is rated to withstand continuous operation at 60 bar in pneumatic systems, provided installation and operating conditions match the manufacturerâs assumptions (correct thread engagement, proper sealing, compatible media, ambient temperature within rated limits, and no cyclic fatigue or vibration beyond design). Brass with nickel plating is susceptible to dezincification and stress corrosion in certain environments; for aggressive media, high humidity, or elevated temperatures, consult manufacturer. For safety margins in dynamic or shock-loaded systems, consider components rated above 60 bar.

Does the Nickel-plated brass plug with GW BSP, type A8 meet industry safety standards for 60 bar pneumatic use?

Nickel-plated brass plug with GW BSP, type A8. based on the provided description (BSP type A8 blind plug with internal thread intended for pneumatic components; material: nickel-plated brass; working pressure: 60 bar), a cautious answer is: - Material and pressure rating: Brass with nickel plating is commonly used in pneumatic fittings and can withstand pressures in the range indicated. A stated working pressure of 60 bar suggests the part is designed for that service. - Industry safety standards: Compliance with specific industry safety standards (e.g., ISO 4414 for pneumatic systems, ISO 228/1 or ISO 7-1 for BSP thread dimensions and sealing, EN 983, or relevant national/sector standards) cannot be confirmed from the given description alone. Certification or test reports (material certificates, pressure test records, conformity declarations, or standards listings) are required to verify formal compliance. - Recommended due diligence: To determine whether Nickel-plated brass plug with GW BSP, type A8 meets safety standards for 60 bar pneumatic use, obtain the manufacturerâs documentation showing: 1. Applicable standards and certifications (ISO, EN, CE, PED if applicable). 2. Results of pressure testing (burst and working pressure verification). 3. Material certificates and plating specifications. 4. Thread standard confirmation (BSP specification used) and sealing method compatibility for pneumatic service. 5. Any approvals for use with the specific gas/medium and operating temperature range. Conclusion: Nickel-plated brass plug with GW BSP, type A8 may be suitable for 60 bar pneumatic use based on its stated working pressure and typical material properties, but formal confirmation requires manufacturer-supplied certification and test data to prove compliance with relevant industry standards.

Nickel-plated brass cap with BSP female thread, type A8

All products, Threaded pneumatic fittings/

Additional information

Material	B – brass (bronze)

Cap with BSP female thread, type A8, intended for pneumatic components. Material: nickel-plated brass. Working pressure: 60 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2108001	Cap A8, 1/8" BSP female	-	60	In stock	Enquiry
MW-2108002	Cap A8, 1/4" BSP female	-	60	In stock	Enquiry
MW-2108003	Cap A8, 3/8" BSP female	-	60	In stock	Enquiry
MW-2108004	Cap A8, 1/2" BSP female	-	60	In stock	Enquiry