Can the Gun for extracting oil and operating fluids, GW BSP connection safely suction warm engine oil (min. 50Â°C) and what fluids must be avoided (e.g., gasoline)?

Gun for extracting oil and operating fluids, GW BSP connection Yes . the Gun for extracting oil and operating fluids, GW BSP connection can safely suction warm engine oil (recommended minimum temperature 50Â°C). The tool is explicitly designed for suctioning engine oil, hydraulic oil, coolant and similar fluids; its materials (acetal body, PE tank, NBR seals, PVC hose, PA11 tube) and recommended operating pressure (6â12 bar) support that use. For best performance and easier flow, suction engine oil when the engine is warm (min. 50Â°C). Do NOT use the gun for explosive or highly flammable fluids (e.g., gasoline) . these are explicitly excluded. Also avoid aggressive solvents or chemicals that attack the listed materials (POM/acetal, PE, NBR, PVC, PA11), as they can degrade seals, hose or tank and cause leaks or failure. If in doubt about a specific fluid, consult the fluidâs chemical compatibility with POM, PE, NBR, PVC and PA11 before use.

Can the Gun for extracting oil and operating fluids, GW BSP connection be used continuously at 6â12 bar and with which fluids (if any) is it unsafe to use?

Gun for extracting oil and operating fluids, GW BSP connection can be operated continuously at 6â12 bar thanks to the lever lock (continuous operation possible). It is suitable for suctioning engine oil, hydraulic oil, coolant and similar nonâexplosive fluids; for engine oil suction a minimum temperature of 50Â°C (warm engine) is recommended. Important: do NOT use with explosive or highly flammable fluids (e.g., gasoline). Materials: acetal (POM) body/valve, PE tank, NBR seals, PVC hose, PA11 tube - avoid aggressive solvents or fluids that attack these materials or NBR (strong acids, ketones, some hydrocarbons).

Is the Gun for extracting oil and operating fluids, GW BSP connection compatible with other tank sizes or hose lengths?

Gun for extracting oil and operating fluids, GW BSP connection is supplied standard with transparent tanks of 1.2 l and 2.0 l and a 1.5 m suction hose finishing in a 26 cm rigid tube Ã10 mm. The description does not state other tank sizes or hose lengths as standard, nor explicit adapters for different tanks or custom hose lengths. Compatibility with other tank sizes or longer/shorter hoses is therefore not guaranteed out of the box and would depend on whether compatible fittings (BSP thread/type), suction tube diameter (Ã10 mm), and hose material/pressure ratings match. If you need to use different tanks or hose lengths, ensure: - The replacement tank has a compatible inlet/fitting (BSP type and size) and can be sealed with NBR-compatible gaskets. - The hose/tube inner and outer diameters match the pump/gun connections (Ã10 mm rigid tube interface) or that appropriate BSP-to-hose adapters are used. - Materials are suitable for the fluids and temperatures (original uses PE tank, PVC hose, PA11 tube, NBR seals). - Operating pressure rating (6â12 bar) is not exceeded by the replacement components. - Safety: do not use with explosive fluids (e.g., gasoline). For a definitive answer and recommended adapters or custom options, contact the manufacturer or supplier with the exact tank thread/fitting dimensions and desired hose specifications.

Gun for extracting oil and operating fluids, GW BSP connection

All products, Special air guns/

Additional information

Easy-to-use air-powered gun made of durable and corrosion-resistant acetal designed for suctioning, e.g., engine oil, hydraulic oil, coolant, etc. Standardly equipped with a transparent tank with a capacity of 1.2 l and 2.0 l, facilitating the monitoring of the suctioned oil or other fluids, and a suction hose 1.5 meters long ending with a rigid tube with an outer diameter of Ø 10 mm (tube length 26 cm). Continuous operation is possible thanks to the lever lock. For engine oil, suction is recommended with a warm engine – min. oil temperature 50°C. Important! Not to be used for explosive fluids, e.g., gasoline. Material: gun, handle, cover, valve – acetal (POM); tank – polyethylene (PE); sealing – NBR; suction hose – PVC; tube – polyamide (PA11). Operating pressure: 6 ÷ 12 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JW-147150-134	Oil and fluid suction gun, tank 1.2 l, GW 1/4" BSP	-	12	In stock	0 zł		Enquiry
JW-147160-134	Oil and fluid suction gun, tank 2.0 l, GW 1/4" BSP	-	12	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Easy-to-use air-powered gun made of durable and corrosion-resistant acetal designed for suctioning, e.g., engine oil, hydraulic oil, coolant, etc. Standardly equipped with a transparent tank with a capacity of 1.2 l and 2.0 l, facilitating the monitoring of the suctioned oil or other fluids, and a suction hose 1.5 meters long ending with a rigid tube with an outer diameter of Ø 10 mm (tube length 26 cm). Continuous operation is possible thanks to the lever lock. For engine oil, suction is recommended with a warm engine – min. oil temperature 50°C. Important! Not to be used for explosive fluids, e.g., gasoline. Material: gun, handle, cover, valve – acetal (POM); tank – polyethylene (PE); sealing – NBR; suction hose – PVC; tube – polyamide (PA11). Operating pressure: 6 ÷ 12 bar.