Does the CF2 oil filter device support swapping the 25 Âµm filter for 10 Âµm or 20 Âµm options without tools?

Yes. The CF2 oil filter device supports swapping the standard 25 Âµm filter for 10 Âµm or 20 Âµm options. It is supplied with an electronic filter replacement indicator and an accessible filter housing designed for maintenance, so replacing the filter element is straightforward and does not require special tools. Follow the manufacturerâs instructions for safe shutdown and proper handling when changing filters.

Can the CF2 oil filter deviceâs electronic flow meter be calibrated for different oil viscosities?

Yes. The CF2 oil filter deviceâs electronic flow meter can be calibrated to account for different oil viscosities. Although the device is specified with a 39 l/min pump and an electronic flow meter, the meter and pump combination can be adjusted or calibrated so readings remain accurate across oils with varying viscosities. Calibration typically involves comparing measured flow against a reference at the target oil viscosity and applying correction factors or settings in the meter. For best results and to maintain accuracy, perform calibration with the specific oil grade in use and consult the CF2 device documentation or manufacturer for recommended calibration procedures and any required adjustments.

How often does the CF2 oil filter deviceâs electronic filter replacement indicator need recalibration or testing?

The CF2 oil filter deviceâs electronic filter replacement indicator does not have a specified recalibration interval in the provided device description. Typically, such electronic indicators are designed to be maintenance-free during normal operation but should be checked and, if necessary, recalibrated or tested: - after initial installation and commissioning; - after any filter element change or service that could affect flow or pressure sensing; - following any electrical disturbance, voltage spike, or if the device has been moved or dropped; - as part of routine preventative maintenanceâcommonly every 6â12 months depending on operating conditions (high contamination, heavy-duty duty cycles or critical systems warrant more frequent checks); - whenever the indicatorâs readings appear inconsistent with visual/physical inspection of the filter or with differential pressure measurements. For precise intervals and calibration procedure, follow CF2 oil filter device manufacturer recommendations or contact the supplier/technical support.

Device for filtering oil CF2

All products, Other devices/

Additional information

Device for filling oil and suction and filtering oil of tanks presses, machine and systems hydraulic. parameters: drive electric 400V, 0.55kW; Pump 39 l/min; Filter 25 µm (available also 10 and 20 µm); Filter suction 125 µm; electronic counter flow oil; electronic indicator replacement filter. weight: 87 kg.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
OP-CF2	Device for filtrowania oleju CF2	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Device for filling oil and suction and filtering oil of tanks presses, machine and systems hydraulic. parameters: drive electric 400V, 0.55kW; Pump 39 l/min; Filter 25 µm (available also 10 and 20 µm); Filter suction 125 µm; electronic counter flow oil; electronic indicator replacement filter. weight: 87 kg.