Is the PERROT lever coupling socket with turned end for hose, carbon steel, KMSK suitable for use in wastewater treatment plants and groundwater drainage at pressures up to 10 bar?

Yes. The PERROT lever coupling socket with turned end for hose, carbon steel, KMSK Format is suitable for use in wastewater treatment plants and groundwater drainage at pressures up to 10 bar. The product description explicitly lists wastewater treatment plants, sewage discharge and groundwater drainage among its wide applications. Its carbon steel, galvanized construction and SBR sealing are appropriate for typical wastewater and drainage conditions, and the specified working pressure is up to 10 bar, matching your stated requirement. Ensure compatibility with the specific media, temperatures and any regulatory or chemical-resistance needs of your installation; if aggressive chemicals or higher temperatures are present, verify material compatibility before use.

Can the PERROT lever coupling socket with turned end for hose, carbon steel, KMSK be used in agricultural and horticultural irrigation systems under varying pressures up to 10 bar?

Yes. The PERROT lever coupling socket with turned end for hose, carbon steel, KMSK is suitable for agricultural and horticultural irrigation systems and is rated for working pressures up to 10 bar. Its carbon steel, galvanized construction and SBR sealing make it appropriate for varied applications in agriculture and horticulture, offering reliable performance under pressures within the specified limit. Ensure compatibility with your hose size and local water chemistry to avoid premature corrosion or seal degradation.

Does the PERROT lever coupling socket with turned end for hose, carbon steel, KMSK resist corrosion in road and tunnel construction environments?

Yes. The PERROT lever coupling socket with turned end for hose, carbon steel, KMSK Format is designed and specified for use in demanding environments such as road and tunnel construction. Key factors supporting its corrosion resistance and suitability: - Material and coating: Made of carbon steel and galvanized, the coupling benefits from a protective zinc coating that significantly improves resistance to corrosion caused by moisture, salt, and common construction-site contaminants. Galvanization is a standard, effective protection for steel in outdoor and underground applications. - Application scope: The product description explicitly lists road and tunnel building among its wide range of applications, indicating manufacturer intent and practical suitability for those environments. - Sealing and pressure: The SBR sealing and working pressure up to 10 bar ensure reliable hydraulic performance under typical site conditions, reducing risk of leak-related corrosion from ingress of water or aggressive media. Limitations and considerations: - Galvanized carbon steel is more corrosion-resistant than bare steel but less so than stainless steel or specially coated alloys. In highly aggressive environments (constant salt spray, de-icing salts, highly acidic/alkaline soils, or continuous immersion in contaminated water), additional protection (thicker galvanizing, sacrificial anodes, protective paint, or use of stainless steel variants) may be advisable. - Regular inspection and maintenance in tunnels and roadworks (where exposure to abrasion, mechanical damage, or chemical agents is likely) will extend service life. - If exposure to particularly aggressive chemical waste or seawater is expected, confirm compatibility or consider alternative materials. Conclusion: For typical road and tunnel construction environments, the PERROT lever coupling socket with turned end for hose, carbon steel, KMSK Format, with galvanization and SBR sealing, offers adequate corrosion resistance, but in highly aggressive conditions additional measures or more corrosion-resistant materials should be considered.

PERROT lever coupling socket with turned end for hose, carbon steel, KMSK

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	10

PERROT lever connector socket with a turned end for hose with wide applications, including in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Sealing: SBR. Working pressure: up to 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HC-KMSK-050-050	KMS socket 50 mm with turned end for 50 mm hose, galvanized steel.	50	10	In stock	Enquiry
HC-KMSK-070-060	KMS socket 70 mm with turned end for 60 mm hose, galvanized steel.	60	10	In stock	Enquiry
HC-KMSK-070-065	KMS socket 70 mm with turned end for 65 mm hose, galvanized steel.	65	10	In stock	Enquiry
HC-KMSK-070-070	KMS socket 70 mm with a turned end for a 70 mm hose, galvanized steel.	70	10	In stock	Enquiry
HC-KMSK-070-075	KMS socket 70 mm with turned end for 75 mm hose, galvanized steel.	75	10	In stock	Enquiry
HC-KMSK-089-075	KMS socket 89 mm with turned end for 75 mm hose, galvanized steel.	75	10	In stock	Enquiry
HC-KMSK-089-080	KMS socket 89 mm with turned end for 80 mm hose, galvanized steel.	80	10	In stock	Enquiry
HC-KMSK-089-090	KMS socket 89 mm with turned end for 90 mm hose, galvanized steel.	90	10	In stock	Enquiry
HC-KMSK-108-100	KMS socket 108 mm with turned end for 100 mm hose, galvanized steel.	100	10	In stock	Enquiry
HC-KMSK-108-110	KMS socket 108 mm with turned end for 110 mm hose, galvanized steel.	110	10	In stock	Enquiry
HC-KMSK-133-125	KMS socket 133 mm with turned end for 125 mm hose, galvanized steel.	125	10	In stock	Enquiry
HC-KMSK-159-150	KMS socket 159 mm with a turned end for a 150 mm hose, galvanized steel.	150	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

PERROT lever connector socket with a turned end for hose with wide applications, including in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Sealing: SBR. Working pressure: up to 10 bar.