Is the Pipe cleaning nozzle, stainless steel compatible with pumps and hoses rated for up to 250 bar working pressure?

Yes. The Pipe cleaning nozzle, stainless steel is compatible with pumps and hoses rated for up to 250 bar working pressure. Its specified working pressure is up to 250 bar, so when used with equipment rated for the same maximum working pressure and connected with appropriate fittings and safety measures, it will operate safely. Ensure all connections, seals, and the pump/hose assembly are certified for 250 bar and that the system is maintained and operated according to manufacturer guidelines and applicable safety standards.

What safety precautions should be taken when using the Pipe cleaning nozzle, stainless steel at pressures up to 250 bar?

When using the Pipe cleaning nozzle, stainless steel at pressures up to 250 bar, observe these safety precautions: - Wear appropriate PPE: safety goggles or face shield, cut- and puncture-resistant gloves, hearing protection, and protective clothing/steel-toe boots. - Inspect the nozzle, hose, fittings and connections before each use for cracks, corrosion or damage; replace any defective parts. - Ensure all fittings are rated for 250 bar or higher and are properly tightened; use correct thread sealants where required. - Securely anchor the hose and nozzle to prevent whipping; use hose restraints and keep bystanders clear of the work area. - Follow correct start-up/shutdown procedures: open valves slowly, avoid sudden pressure spikes; bleed residual pressure before disconnecting. - Never point the nozzle at people, animals, or electrical equipment; high-pressure jets can penetrate skin and cause serious injury. - Maintain safe distance and use appropriate guards or remote control methods where possible. - Train operators in high-pressure water safety, emergency shutdown and first aid for injection injuries. - Store and transport the nozzle and hoses protected from impact, corrosion and contamination.

Can the Pipe cleaning nozzle, stainless steel withstand corrosion and chemicals at 250 bar working pressure?

Yes. the Pipe cleaning nozzle, stainless steel is designed to operate at working pressures up to 250 bar. Because it is made from stainless steel, it offers good general resistance to corrosion and many common chemicals, making it suitable for highâpressure cleaning applications. However, stainless steel corrosion resistance varies by grade and the specific chemicals involved: - Corrosion resistance: Standard stainless steels (e.g., 304) resist oxidation and mild corrosives well. Higherâperformance grades (e.g., 316) provide better resistance to chlorides and harsher environments. Without a specific grade listed, assume reasonable but not universal resistance. - Chemical compatibility: Most aqueous cleaning solutions, detergents, and mildly acidic or alkaline agents are compatible. Strong chlorides, concentrated acids (especially hydrochloric, sulfuric), and certain halogenated solvents can attack some stainless steels, particularly under high pressure, elevated temperature, or prolonged exposure. - Mechanical integrity at 250 bar: Stainless steel nozzles manufactured and rated for up to 250 bar are engineered to withstand that working pressure mechanically. Corrosion that undermines wall thickness or causes pitting can reduce pressure tolerance over time, so material grade, exposure conditions, and maintenance matter. - Recommendations: Confirm the exact stainless steel grade used in the Pipe cleaning nozzle, stainless steel. Verify chemical compatibility with the intended cleaning agents (consult chemical compatibility charts or supplier). Implement regular inspection for pitting, crevice corrosion, or erosion, and replace if degradation is observed. Conclusion: The Pipe cleaning nozzle, stainless steel can withstand corrosion and many chemicals at 250 bar when made from an appropriate stainless steel grade and used with compatible chemicals and proper maintenance. For aggressive chemicals (strong acids, chlorides, halogenated solvents), verify grade and compatibility before use.

Pipe cleaning nozzle, stainless steel

All products, Guns for high-pressure washers/

Additional information

Pipe cleaning nozzle. Material: stainless steel. Working pressure: up to 250 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-170013	Nozzle cal. 0.55 with GW 1/4" BSP	-	250	In stock	Enquiry
MH-170014	Nozzle cal. 0.8 with GW 1/4" BSP	-	250	In stock	Enquiry
MH-170017	Nozzle cal. 0.8 with GW 1/8" BSPT	-	250	In stock	Enquiry
MH-170018	Nozzle cal. 0.9 with GW 1/8" BSPT	-	250	In stock	Enquiry