Is the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT2 suitable for continuous use at 150Â°C and 280 bar?

Yes. Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT2 is specified for continuous operation up to +150Â°C and a working pressure up to 280 bar. The product description lists operating temperature: up to +150Â°C and working pressure: up to 280 bar, and it is made of carbon steel, galvanized, intended for high-pressure washers. Therefore it is suitable for continuous use at 150Â°C and 280 bar within those specified limits.

Can the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT2 handle 40 l/min at 280 bar and 150Â°C continuously?

Yes. The Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT2 handle is rated for continuous operation at the specified conditions: working pressure up to 280 bar, flow rate 40 l/min and operating temperature up to +150Â°C. Constructed from galvanized carbon steel with MT2 thermal insulation, it is designed to handle those parameters continuously. Ensure fittings and downstream equipment are compatible and regularly inspected for safety.

Does the Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT2 require special fittings for GW 1/4" NPT outlet at 280 bar?

Lance for high-pressure cleaner, inlet GZ 1/4" BSP, galvanized steel, type MT2 does require attention to fittings because its inlet and outlet use different thread standards: the inlet is GZ 1/4" BSP (BSPP male) and the outlet is GW 1/4" NPT (NPT female). For the outlet specified as GW 1/4" NPT you will need a mating 1/4" NPT male fitting to connect downstream equipment or hose. No special bespoke adapter is required beyond the correct thread type and pressure rating, but ensure the following: - Thread compatibility: use a 1/4" NPT male fitting (not BSP) for the GW 1/4" NPT outlet to avoid mismatching threads. - Pressure rating: fittings, adapters, and hoses must be rated for up to 280 bar (â4060 psi). select high-pressure fittings designed for that working pressure. - Sealing method: use appropriate sealing (PTFE tape or thread sealant compatible with NPT threads and system fluids) applied per manufacturer guidance; BSPP vs NPT sealing differs, so donât interchange sealing methods incorrectly. - Materials and temperature: choose fittings compatible with carbon steel/galvanized lance and with operating temperature up to +150Â°C. - Safety and standards: where possible use fittings certified for high-pressure hydraulic/washer applications and follow installation torque/specs. In short: you do not need a special custom fitting beyond a standard 1/4" NPT male high-pressure fitting rated for 280 bar and suitable for the operating temperature and fluid.

Lance for high-pressure cleaner, inlet GZ 1/4″ BSP, galvanized steel, type MT2

All products, Guns for high-pressure washers/

Additional information

MT2 type thermal insulation lance intended for high-pressure washer. Connections: (inlet) GZ 1/4″ BSP / (outlet) GW 1/4″ NPT. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MH-120173	MT2 lance 700 mm, galvanized steel	-	280	In stock	Enquiry
MH-120176	MT2 lance 900 mm, galvanized steel	-	280	In stock	Enquiry
MH-120183	MT2 lance 1200 mm, galvanized steel	-	280	In stock	Enquiry
MH-120188	MT2 lance 1500 mm, galvanized steel	-	280	In stock	Enquiry
MH-120191	MT2 lance 1700 mm, galvanized steel	-	280	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

MT2 type thermal insulation lance intended for high-pressure washer. Connections: (inlet) GZ 1/4″ BSP / (outlet) GW 1/4″ NPT. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: carbon steel, galvanized.