Is the Pipe deburring device, type S01 suitable for both carbon steel and stainless steel pipes up to 42 mm diameter?

Yes. The Pipe deburring device, type S01 is suitable for both carbon steel and stainless steel pipes up to 42 mm diameter. The device is specifically designed for finishing pipe ends after cutting, removing burrs from both outer and inner edges, and its stated maximum pipe diameter is 42 mm.

Can Pipe deburring device, type S01 operate continuously at 230 V and 50 rpm without overheating?

Pipe deburring device, type S01 cannot be guaranteed to operate continuously at 230 V and 50 rpm without overheating based solely on the provided data. The specifications (230 V, 0.18 kW, 50 rpm, max Ã 42 mm) indicate low power and slow speed, which suggest modest thermal stress, but there is no information about duty cycle, cooling, thermal protection, or manufacturer guidance on continuous operation. Continuous use may be acceptable for light-duty deburring of small-diameter carbon or stainless steel pipes, yet risk of overheating rises with prolonged heavy loads, abrasive wear, clogged tooling or poor ventilation. To determine safe continuous operation, consult the manufacturerâs manual or supplier for duty cycle, recommended duty rating, and any required cooling/maintenance.

Does the Pipe deburring device, type S01 include adjustable blades for varying wall thicknesses?

Based on the provided description of Pipe deburring device, type S01, there is no explicit mention that the device includes adjustable blades for varying wall thicknesses. The description states the device is intended for finishing pipe ends after cutting (removal of burrs from outer and inner edges) and is designed for pipes of carbon and stainless steel up to 42 mm diameter, with technical data for voltage, power, speed, and weight. Since adjustable blades or a mechanism to vary blade position for different wall thicknesses are not specified, you should assume the device does not explicitly include that feature. If adjustable blades are required, verify with the manufacturer or supplier for confirmation or optional accessories.

Device for deburring pipes, type S01

All products, Hydraulic pipe processing devices/

Additional information

Standard length [m]	60

Device intended for machining finishing ends pipes po cutting (removal burrs with outer and internal edge). intended for pipes made both of carbon steel as and steel stainless. Maximum Diameter tubes: 42 mm. Voltage: 230 V. Moc: 0.18 kW. speed: 50 obr/min. weight: 30 kg.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
OP-RS01	Device for gratowania tubes S01	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Device intended for machining finishing ends pipes po cutting (removal burrs with outer and internal edge). intended for pipes made both of carbon steel as and steel stainless. Maximum Diameter tubes: 42 mm. Voltage: 230 V. Moc: 0.18 kW. speed: 50 obr/min. weight: 30 kg.