Is the Pneumatic extender terminated with quick couplings Eurostandard DN 7,2 suitable for use with antistatic pneumatic tools at temperatures down to -40Â°C?

Yes. The Pneumatic extender terminated with quick couplings Eurostandard DN 7,2 Format is suitable for use with antistatic pneumatic tools at temperatures down to -40Â°C. The hose is described as a rubber air hose with antistatic properties, constructed with EPDM inner and outer layers and textile reinforcement, and has an operating temperature range from -40Â°C to +100Â°C, making it appropriate for low-temperature use with antistatic tools.

Can the Pneumatic extender terminated with quick couplings Eurostandard DN 7,2 maintain antistatic performance in humid environments?

Pneumatic extender terminated with quick couplings Eurostandard DN 7,2 Format: Based on the description, the hose is made of EPDM rubber and is specified as having antistatic properties. EPDM itself has good resistance to moisture, and the presence of antistatic treatment implies surface or bulk conductivity designed to dissipate charge. However, humidity raises surface conductivity variability: in many designs antistatic performance can actually improve slightly with higher humidity (better surface conduction), but prolonged wet conditions can degrade connectors (brass quick couplings) or allow corrosion that may impair consistent earthing. Given the Eurostandard DN 7,2 brass fittings and MPX20 construction, the extender should maintain antistatic behavior in typical humid environments, but for use in persistently wet, submerged, or highly corrosive conditions, verify manufacturer antistatic specification (surface resistivity/ISO standard) and ensure regular inspection and grounding continuity.

Does the Pneumatic extender terminated with quick couplings Eurostandard DN 7,2 meet antistatic standards for use with high-speed pneumatic tools?

Pneumatic extender terminated with quick couplings Eurostandard DN 7,2: based on the provided description, the hose is described as a "ready rubber air hose made of MPX20" with inner and outer layers of EPDM rubber and textile braid reinforcement, and it is noted "for general use, particularly for pneumatic tools, where a rubber hose with antistatic properties is required." However, the description does not provide specific antistatic parameters (surface resistivity, volume resistivity, or a normative standard reference such as ISO 8031/ISO 2398, EN 6093, or a conductivity/ohm value) nor any certification statement. Conclusion: The Pneumatic extender terminated with quick couplings Eurostandard DN 7,2 is marketed for applications requiring antistatic properties, but without explicit electrical resistance values or a referenced standard/certification, you cannot definitively confirm it meets specific antistatic standards for use with high-speed pneumatic tools. For safe use with high-speed tools where defined antistatic compliance is required, request from the supplier a technical datasheet or certificate showing measured surface/volume resistivity or conformity to the relevant standard.

Pneumatic extension terminated quick coupling Eurostandard DN 7.2

All products, General purpose hoses/

Additional information

Material	B – brass (bronze)
Maximum operating temperature [°C]	100
Minimum operating temperature [°C]	-40
Vacuum resistance	no
Standard length [m]	30

Pneumatic extension – ready rubber line for air made with hose MPX20. terminated brass socket and a plug quick coupling Eurostandard DN7.2 (matches for typical connections). Do use general, in particular for tools pneumatic, tam where required is hose rubber o properties antistatic. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
SP-MPX20-P-08-10	Pneumatic extension 10 m, hose MPX20, 8 mm, with a quick-coupling socket and plug	8	20	In stock	0 zł		Enquiry
SP-MPX20-P-08-15	Pneumatic extension 15 m, hose MPX20, 8 mm, with a quick-coupling socket and plug	8	20	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Pneumatic extension – ready rubber line for air made with hose MPX20. terminated brass socket and a plug quick coupling Eurostandard DN7.2 (matches for typical connections). Do use general, in particular for tools pneumatic, tam where required is hose rubber o properties antistatic. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C.