Can the Pressure regulator for pneumatic tools, aluminium be used with compressors supplying up to 16 bar if its minimum working pressure is 8 bar and output is fixed at 6 bar?

Yes . the Pressure regulator for pneumatic tools, aluminium can be used with compressors supplying up to 16 bar, provided two conditions are met: 1. The compressorâs delivery pressure does not exceed the regulatorâs maximum working pressure of 16 bar. 2. The compressor can reliably supply at least the regulatorâs minimum working pressure of 8 bar at the regulator inlet. Important operational note: the device has a factory-set output fixed at 6 bar (not adjustable). That means even if your compressor supplies between 8 and 16 bar, the regulator will reduce and hold the tool-side pressure at 6 bar, protecting the tool and operator and ensuring consistent performance. Do not use the regulator if your compressor cannot maintain at least 8 bar at the inlet, and do not exceed the 16 bar maximum inlet pressure.

Does the Pressure regulator for pneumatic tools, aluminium protect against pressure spikes from compressors over 8 bar?

Yes. The Pressure regulator for pneumatic tools, aluminium is factory-set to 6 bar and cannot be changed. It is expressly described as protecting operator and tools by preventing pressure spikes and providing a constant pre-set output, with a minimum working pressure of 8 bar and a maximum of 16 bar. Therefore when supplied from a compressor delivering over 8 bar (up to 16 bar), this regulator will protect against pressure spikes and deliver the safe 6 bar output to the pneumatic tool.

Is the Pressure regulator for pneumatic tools, aluminium suitable for continuous use at compressor pressures above 10 bar?

Pressure regulator for pneumatic tools, aluminium. No. This regulator is factory-set to an output of 6 bar (not adjustable) and its minimum working pressure is specified as 8 bar. While its maximum working pressure is 16 bar, the minimum working pressure requirement means it needs at least 8 bar inlet to function properly and maintain the set 6 bar output. Continuous operation at compressor pressures above 10 bar is within the stated maximum, but long-term use should consider that the device is designed for direct attachment to tools and to operate between 8â16 bar input; continuous exposure to higher-end compressor pressures (close to 16 bar) may increase wear and the risk of component stress. If your compressor routinely operates well above 10 bar, ensure compatibility with your system, confirm any manufacturer guidance on continuous high-pressure use, and consider a regulator specifically rated for continuous operation at your compressorâs pressure for maximum safety and longevity.

Regulator pressure for tools pneumatic, aluminum

All products, Pneumatic accessories/

Additional information

Material	AL – aluminum

Regulator pressure air with factory set value pressure output 6 bar (set pressure not can change). Do screwing in directly for tools pneumatic. Regulator pressure increases safety use: protects the operator and tools use, avoiding strokes pressure; ensures optimal flow capacity tools pneumatic through supply constant, pre set pressure; limits excessive wear compressed air. light, A compact size and compatible of all available tools pneumatic. minimal Working pressure: 8 bar. maximum Working pressure: 16 bar. Material: aluminum. weight: 41 g.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-735420	Regulator pressure 1/4" - 6 bar, aluminum	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Regulator pressure air with factory set value pressure output 6 bar (set pressure not can change). Do screwing in directly for tools pneumatic. Regulator pressure increases safety use: protects the operator and tools use, avoiding strokes pressure; ensures optimal flow capacity tools pneumatic through supply constant, pre set pressure; limits excessive wear compressed air. light, A compact size and compatible of all available tools pneumatic. minimal Working pressure: 8 bar. maximum Working pressure: 16 bar. Material: aluminum. weight: 41 g.