Very flexible and lightweight suction and discharge hose intended for water, juices, beverages, and alcohols with a concentration of up to 20%, as well as other food products. Not suitable for fatty substances such as milk or oils. Resistant to vacuum and collapsing due to the embedded steel wire spiral in the hose wall. A significant advantage is its transparent wall resistant to UV radiation, allowing for easy visual monitoring of media flow, as well as the smoothness of its inner part reducing flow losses and ensuring ease of cleaning. Compared to the ARMORVIN HNA hose, it features higher working pressure and greater resistance to vacuum. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used: 1) for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons); 2) for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk substances (non-fatty). Abrasiveness and potential static electricity issues should be considered. As a hose reinforced with a steel spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. Standards and requirements: Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C), 2023/2006/EC (GMP). Hose material: light green transparent PVC. Reinforcement: galvanized steel spiral. Working pressure: from 2 bar to 8 bar, depending on the hose diameter. Operating temperature: from -5°C to +65°C.