Is the Hose quick connect plug, with valve, acetal, PLC series DN 6.3 compatible with deionized water and safe at operating temperatures -40Â°C to +82Â°C and pressures up to 8.3 bar?

Yes. The Hose quick connect plug, with valve, acetal, PLC series DN 6.3 is compatible with deionized water and safe for the stated conditions. The product description explicitly lists intended uses including deionized water filtration and washing installations, specifies acetal construction, NBR Oâring sealing, an operating temperature range of â40 Â°C to +82 Â°C, and a working pressure up to 8.3 bar. These specifications indicate suitability for deionized water and safe use within the given temperature and pressure limits. Note: For long-term use with very pure deionized water or aggressive cleaned systems, consider verifying NBR compatibility with any specific additives or extreme purity requirements, and confirm maintenance/inspection intervals for seals if absolute contamination control is critical.

Can the Hose quick connect plug, with valve, acetal, PLC series DN 6.3 be used for leak detection and deionized water filtration at up to 8.3 bar?

Yes. The Hose quick connect plug, with valve, acetal, PLC series DN 6.3 is suitable for leak detection and deionized water filtration up to 8.3 bar. It is described for washing installations, deionized water filtration, industrial machines and leak detection; made of acetal with NBR oâring seals, rated working pressure up to 8.3 bar and operating temperature range â40Â°C to +82Â°C. Ensure NBR compatibility with your specific deionized water chemistry and validate system cleanliness and any regulatory or purity requirements for your application.

Can the Hose quick connect plug, with valve, acetal, PLC series DN 6.3 withstand repeated cycles in washing installations without seal degradation?

Yes. the Hose quick connect plug, with valve, acetal, PLC series DN 6.3 is suitable for repeated cycles in washing installations without premature seal degradation, provided normal use within its specified limits. Key points: - Body material acetal (POM) offers good wear resistance, dimensional stability and low moisture absorption, making it appropriate for frequent connect/disconnect cycles common in washing and filtration systems. - Sealing uses an NBR (nitrile) O-ring. NBR resists water and many detergents and is commonly used for dynamic sealing; it will tolerate repetitive cycles provided temperature, chemical exposure and pressure remain within specifications. - Rated working pressure up to 8.3 bar and operating temperature range â40Â°C to +82Â°C cover typical washing installation conditions. Staying within these limits minimizes accelerated O-ring aging, hardening or swelling. - For deionized water filtration and leak detection use, NBR is generally acceptable, but prolonged exposure to strong oxidizers, high-concentration alkaline cleaners, or solvents can degrade NBR faster. If your wash chemicals include aggressive agents, consider verifying chemical compatibility or switching to a more resistant elastomer (e.g., FKM/EPDM) if needed. - Installation practice matters: proper O-ring lubrication, clean mating surfaces, avoiding sharp edges, and preventing overpressure or excessive lateral load will extend seal life over many cycles. Conclusion: Under typical washing installation conditions ( pressures â¤ 8.3 bar, temperatures between â40Â°C and +82Â°C, and no exposure to aggressive chemicals beyond NBR compatibility), the Hose quick connect plug, with valve, acetal, PLC series DN 6.3 can withstand repeated cycles without significant seal degradation.

Plug quick coupling for hose, with valve, acetal, series PLC DN 6.3

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

Medium size plug quick coupling with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. Length L – total length. Material: acetal. Sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: from -40°C to +82°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CC-PLV-36-AC	Plug PLC DN6.4 for hose 1/4", with a valve, acetal	-	8.3	In stock	Enquiry
CC-PLV-37-AC	Plug PLC DN6.4 for hose 5/16", with a valve, acetal	-	8.3	In stock	Enquiry
CC-PLV-38-AC	Plug PLC DN6.4 for hose 3/8", with a valve, acetal	-	8.3	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Medium size plug quick coupling with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. Length L – total length. Material: acetal. Sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: from -40°C to +82°C.