Is the Bulkhead socket for hose quick-connector, with valve, polypropylene, PMC series DN 3.2 compatible with medical-grade tubing and standard gas detection hoses?

Bulkhead socket for hose quick-connector, with valve, polypropylene, PMC series DN 3.2 appears suitable for many gas-detection and medical-device applications based on the provided description, but final compatibility depends on specific tubing and application requirements. Supporting points: - Intended use lists gas detection and medical devices, indicating design consideration for those fields. - Materials: polypropylene body and EPDM sealing are commonly used in fluid and gas handling; EPDM provides good sealing for many gases and is biocompatible in many cases (but not universally medical-grade). - Working pressure (up to 8.3 bar) and operating temperature range (0Â°C to +71Â°C) are compatible with typical low-pressure gas detection and sampling lines. - One-hand secure connection with audible click supports reliable, repeatable fittings needed in medical and gas-detection workflows. Limitations / checks required before use with medical-grade tubing or standard gas detection hoses: - Regulatory/biocompatibility: polypropylene and EPDM must meet applicable medical/device regulatory standards (e.g., ISO 10993, USP Class VI) for a specific medical application. - Chemical compatibility: verify EPDM compatibility with the specific gas or sampling media (some solvents, oils, or certain gases may affect EPDM). - Dimensional fit: confirm DN 3.2 matches inner/outer diameters of your tubing and the connectorâs mating geometry. - Leak/flow requirements: validate leak-tightness and flow characteristics in your system under expected pressure/temperature cycles. - Cleanliness/sterilization: confirm connector can tolerate required sterilization/cleaning methods without degradation. Conclusion: Bulkhead socket for hose quick-connector, with valve, polypropylene, PMC series DN 3.2 is likely compatible in many gas-detection and non-invasive medical uses, but you must verify material certifications, dimensional fit, chemical compatibility, and sterilization/regulatory requirements for your specific medical-grade tubing or standard gas detection hose.

Can the Bulkhead socket for hose quick-connector, with valve, polypropylene, PMC series DN 3.2 withstand repeated autoclave sterilization without degrading seals?

Bulkhead socket for hose quick-connector, with valve, polypropylene, PMC series DN 3.2: Based on the provided specification, the housing is polypropylene and the seals are EPDM, with an operating temperature range 0Â°C to +71Â°C. Standard autoclave sterilization (steam, 121Â°Câ134Â°C, high humidity and pressure) exceeds the stated maximum temperature and is likely to deform polypropylene and accelerate EPDM aging, causing loss of seal integrity. Therefore it is not suitable for repeated autoclave sterilization without risk of degradation. For validated autoclave compatibility use materials rated for those temperatures (e.g., PTFE, silicone, or highâtemperature grades) or consult the manufacturer for tested sterilization procedures.

Does the Bulkhead socket for hose quick-connector, with valve, polypropylene, PMC series DN 3.2 produce an audible click to confirm secure connection under pressure?

Yes. The Bulkhead socket for hose quick-connector, with valve, polypropylene, PMC series DN 3.2 produces an audible click to confirm a secure connection under pressure. The product description explicitly states that the effectiveness of the connection is indicated by an audible click. The connectorâs ballâless, sleeveâfree design enables easy, oneâhanded connection and disconnection, and it is rated for working pressures up to 8.3 bar with EPDM sealing, ensuring reliable sealing and audible feedback when properly engaged.

Socket bulkhead quick coupling for hose, with valve, polypropylene, series PMC DN 3.2

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)
Standard length [m]	30

Socket bulkhead quick coupling with valve for hose intended is for detection gases, devices medical, analyzers chemical, printing inkjet, as equipment devices optical, itp. The characteristic design (it does not contain balls and a locking sleeve) allows easier, secure one-hand connection and disconnection. An audible click signals a successful connection. Length L – total length. Material: polypropylene. Sealing: EPDM. Working pressure: for 8.3 bar. Operating temperature: from 0°C to +71°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CC-PMV-06-PP	Socket PMC DN3.2 for hose 1/16", with a valve, bulkhead, polypropylene	-	8.3	In stock	Enquiry
CC-PMV-07-PP	Socket PMC DN3.2 for hose 1/8", with a valve, bulkhead, polypropylene	-	8.3	In stock	Enquiry
CC-PMV-09-PP	Socket PMC DN3.2 for hose 1/4", with a valve, bulkhead, polypropylene	-	8.3	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Socket bulkhead quick coupling with valve for hose intended is for detection gases, devices medical, analyzers chemical, printing inkjet, as equipment devices optical, itp. The characteristic design (it does not contain balls and a locking sleeve) allows easier, secure one-hand connection and disconnection. An audible click signals a successful connection. Length L – total length. Material: polypropylene. Sealing: EPDM. Working pressure: for 8.3 bar. Operating temperature: from 0°C to +71°C.